







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation Cost in Boulder City, NV: What Masonry Walls and Desert Heat Add to the Number
Cabinet installation in Boulder City typically runs $4,000-$13,000 for a full kitchen, and a small 10-12 linear-foot kitchen with KraftMaid semi-custom cabinetry usually lands between $6,500 and $9,800 installed. Those figures are higher than the national averages you’ll find on pricing sites, and the reason is local: most of Boulder City’s housing stock was built in the 1930s for Hoover Dam workers, and adobe and masonry walls from that era are rarely plumb, square, or flat. If you want a real number for your kitchen, call Bradford Remodeling Boulder City at (844) 797-9259 and we’ll put a written price in your hands before anything is ordered.
Key Takeaways
- Small kitchen (10-12 linear feet), KraftMaid semi-custom, fully installed: $6,500-$9,800
- Full kitchen cabinet package: $4,000-$13,000 depending on linear footage and door style
- Masonry-wall adjustment (scribing, shimming, filler panels, anchors): adds 15-30% to labor versus framed-wall installs
- Bradford’s written price discloses the masonry adjustment as a line item, not a change order after demo
- Every completed install is covered by the 365-Day Done Right Promise

Why a 1930s Boulder City Kitchen Costs More to Fit Than a New-Build Kitchen
In a newer Las Vegas suburb, cabinets go against framed walls with drywall that was hung plumb within an eighth of an inch. The cabinet installs fast because the wall does the work for you. In a 1930s Boulder City kitchen, that assumption falls apart the moment you pull the old boxes off the wall.
Adobe and masonry walls move differently over ninety years. They settle, they bow, and they were never framed to modern tolerances in the first place. What that means on install day is more scribing (cutting the cabinet face to follow the wall’s actual contour), more shimming (packing the cabinet out to level on floors that have heaved or dipped), and more custom filler panels at corners and the ceiling line to close gaps that would otherwise show daylight. A run that takes two hours in new construction can take four here. That’s the honest reason your cabinet installation cost in Boulder City climbs above what the internet told you to expect.
The labor additions, line by line
- Wall scribing on base and upper cabinets: roughly 0.5 to 1 extra labor hour per linear foot when the wall is out of plane by more than 1/4 inch over a 10-foot run.
- Custom filler panels: 1-3 hours per corner or ceiling return, depending on how far out of square the room is. Stock fillers won’t close a gap that widens as it rises.
- Shimming to level: 2-5 hours across a typical small kitchen when the floor has settled. Cabinets must sit level even when the floor doesn’t.
- Masonry fastening: 3-6 hours of blocking or anchor installation before a single cabinet goes up (more on that below).
Cabinets Don’t Screw Into Adobe. Here’s What That Costs You.
Standard cabinet installation assumes wood-frame walls: a screw into a stud and you’re done. Boulder City’s masonry and adobe walls have no studs where you need them, and a wood screw into masonry holds nothing. The wall has to be prepared before the cabinets arrive, and most published pricing guides skip this step entirely because most of the country isn’t installing cabinets into 1930s dam-worker housing.
What the prep actually involves: installing supplemental wood blocking anchored into the masonry, or using masonry anchors and epoxy-set fasteners rated for the load a loaded upper cabinet places on the wall. A cabinet full of dishes is heavy, and it’s hanging over your counter. We treat the fastening as structural, not cosmetic. That step adds material cost and several labor hours to the job, and it’s the single biggest reason a Boulder City cabinet quote looks different from a Henderson or Summerlin quote for the same square footage.
If your kitchen project goes beyond cabinetry, our Kitchen Remodeling service covers the full scope, and a complete Kitchen Remodeling in Boulder City runs $14,000-$45,000 depending on layout changes and finishes.

Heat Changes the Schedule, Not Just the Price
Boulder City summers push past 100°F regularly, and that affects how cabinet installation gets staged. Adhesive-backed components, some finishing materials, and certain sealants need to be stored in a climate-controlled space and applied within a specific temperature window. Cure times shift. A material that behaves one way in a shaded Las Vegas garage behaves differently in a Boulder City kitchen with west-facing windows and no shade.
What that means for you as a homeowner: the cabinets and finishing materials get staged properly and the install gets scheduled around temperature, not around the crew’s convenience. It also means the job may be sequenced differently than you’d expect, with certain components going in earlier in the day. That’s not a delay, it’s the plan. A contractor who ignores it will have callbacks a month later, and the 365-Day Done Right Promise exists precisely because we’d rather get it right the first time than return to fix a finish that failed in the heat.
What Cabinet Installation Costs in Boulder City, Broken Out
Here’s a real installed-cost range for a small Boulder City kitchen, 10 to 12 linear feet, KraftMaid semi-custom cabinetry. This is a working number, not a teaser.
| Line item | Cost range |
|---|---|
| KraftMaid semi-custom cabinets (10-12 LF, uppers and lowers) | $3,200-$5,400 |
| Hardware (pulls, knobs, soft-close upgrades) | $250-$600 |
| Standard installation labor (demolition, set, level, align) | $1,600-$2,400 |
| Masonry-wall adjustment (scribing, shimming, filler panels, anchors, blocking) | $900-$1,800 |
| Total installed, small kitchen | $6,500-$9,800 |
| Full kitchen cabinet package (broad range) | $4,000-$13,000 |
For reference, a full kitchen remodel including cabinetry, counters, and backsplash runs $14,000-$45,000 in Boulder City. A small kitchen remodel lands at $9,000-$20,000. Stone surfaces are quoted separately: Silestone and Caesarstone countertops run $2,000-$6,500 installed, and a backsplash adds $800-$2,500. Kohler and Moen fixtures are specified on most of our kitchen work because the manufacturer documentation backs our own guarantee.
The masonry adjustment is a disclosed line item in Bradford’s written price, not a change order after the walls are opened. You see the full number before a single cabinet is ordered. That’s the whole point of how we run a job.
Why We Can Give You a Firm Number Before Order Day
Cabinet installation pricing goes sideways when a contractor quotes off square footage and discovers the real scope after demolition. We quote the wall condition as part of the estimate, not as a surprise. Our technicians have up to 22 years of experience, and on masonry walls that experience is what lets us read a room before demo and price the scribing and blocking accurately up front. Background-checked, uniformed technicians show up on the scheduled day, and a live person answers the phone 24/7 if something changes. The written price is documented, the scope is documented, and the 365-Day Done Right Promise holds for a full year on the finished work.
FAQs
Cabinet installation in Boulder City runs $4,000-$13,000 for a full kitchen, and a small 10-12 linear-foot kitchen with KraftMaid semi-custom cabinets typically lands at $6,500-$9,800 installed. The range is higher than national averages because 1930s adobe and masonry walls require scribing, shimming, filler panels, and masonry-rated fasteners that framed-wall installs don’t. Call (844) 797-9259 for an exact quote; estimates are free.
Because the walls aren’t plumb, square, or flat, and they have no studs for standard fastening. Ninety-year-old adobe and masonry walls need wall scribing, custom filler panels, shimming on settled floors, and either supplemental wood blocking or epoxy-set masonry anchors before a cabinet can hang. That prep adds 15-30% to labor versus new construction. We put that adjustment in writing as a line item so you know the full cost before ordering.
Refacing is usually cheaper, but only when the existing boxes are sound and the wall behind them is stable. In Boulder City’s older homes, refacing can hide a masonry wall problem that resurfaces later. If the boxes are solid and the wall is true, refacing makes sense. If the wall needs work, new installation with proper fastening is the more durable choice. Call (844) 797-9259 and we’ll tell you honestly which applies to your kitchen.
Yes, with proper staging. Adhesive-backed components and certain finishing materials need climate-controlled storage and application within specific temperature windows when Boulder City pushes past 100°F. We schedule the job around those windows rather than ignoring them, which protects the finish from failing later. Call (844) 797-9259 to book an estimate and we’ll map the schedule for your specific kitchen.
Get a Written Cabinet Installation Price for Your Boulder City Kitchen
No surprise numbers at the door, no change order after demo. Bradford Remodeling Boulder City puts the full cabinet installation price in writing before work starts, discloses the masonry-wall adjustment up front, and stands behind every install with the 365-Day Done Right Promise. Call (844) 797-9259 for a free estimate. A live person answers, day or night.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City, NV.
What Our Customers Say
"Fixed price, written scope, and no surprise charges."
- Wes D."Respectful crew. Covered the floors and swept every day."
- Jackie T."Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R.












