







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Boulder City Homeowners Choose CWS Construction
We provide independent CWS construction and cabinetry service in Boulder City, NV, for owners whose Concord, Hartford, Brookhaven, or Prelude systems need repair, refacing, or a kitchen rebuilt around them. We are not CWS and we don’t represent the manufacturer. What makes our CWS work different is that we’ve spent years learning exactly how these lines are built and how they fail in a high-desert climate where summer highs sit above 100°F and the sun comes in hard through unshaded windows. Call (844) 797-9259 and a live person answers, day or night, to start a free estimate.
Why Trust Bradford Remodeling Boulder City for Your CWS Construction?

Our technicians have up to 22 years of experience, and a good share of that time has been spent inside kitchens exactly like yours: CWS boxes on the wall, original hinges, and doors that have been opening and closing through a lot of Nevada summers. They know the Concord raised-panel door and its standard overlay, the Hartford shaker front, the Brookhaven full-overlay framed box, and the Prelude laminate storage panels. That matters at the parts level. CWS hinges and glides from different production eras don’t always swap cleanly, and a technician who has pulled the wrong hinge before learns to check the bore, the overlay, and the mounting plate before ordering anything.
We service warranty-safe: we don’t modify cabinet boxes in ways that damage the manufacturer’s construction, and we use OEM CWS hinges, glides, and door fronts whenever those parts are available in the right color and fit. When they aren’t, we specify quality aftermarket hardware from Blum or Grass rated for dry climates. Every price is written down before a tool comes out, and every completed project carries the 365-Day Done Right Promise – if the work fails within a full year, we come back and correct it at no charge. We are independent, not authorized or sponsored by CWS, and we’ll tell you plainly when a factory warranty claim is the better route than a repair.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Boulder City
Most of what we see on CWS cabinetry in Boulder City comes down to three things: moisture, sun, and wear. Here’s what that looks like on each line.
- CWS Concord doors warping and delaminating. The raised-panel Concord front is more susceptible than people expect. When indoor humidity swings during monsoon season, wood and laminate fronts – especially cabinet faces set close to a window – take on and release moisture unevenly, and the panel can bow or the edge can lift. It shows up first as a door that rubs the frame when you close it.
- Hartford shaker fronts doing the same, faster near glass. The Hartford shaker door has a lot of flat surface catching direct sun through an unshaded window. In a Boulder City kitchen with west-facing glass, that cycles the finish every afternoon and drives the same warping and edge-lift.
- Brookhaven particleboard boxes swelling at the toe kick and under the sink. The Brookhaven full-overlay framed cabinet uses particleboard box construction. A slow leak under the sink, or slab moisture wicking up through the toe kick, swells the board and it crumbles at the bottom. By the time you notice, the damage is usually hidden behind the kick plate.
- Pre-2010 drawer glides sagging and rubbing the face frame. Older CWS lines used glides that simply wear out. Drawers start to sag, rub the face frame, and strip the finish off where they drag. It’s a hardware problem, not a box problem, and it’s usually fixable.
- Prelude laminate and thermofoil edges peeling in direct sun. The Prelude closet and storage system uses laminate panels whose edges lift when they sit in direct sun through an unshaded window. Boulder City’s high-altitude climate brings more UV than most of the valley, so it happens here a little sooner.
A typical case: a homeowner notices that several CWS Concord cabinet doors no longer close flush and the finish is peeling along the bottom edge near the dishwasher. The usual cause is heat and moisture cycling from the adjacent appliance combined with particleboard box swelling at the toe kick. A qualified local pro typically confirms whether the boxes are structurally sound, replaces failed hinges and glides with OEM or equivalent hardware, and re-fronts or refaces the doors rather than replacing the entire cabinet run. That order of work saves money and keeps the rest of a sound kitchen intact.
CWS Parts & Our Repair-vs-Replace Approach
We don’t keep CWS parts in stock anywhere – no shop full of doors waiting for a job. Every part is sourced to the specific job: we measure the door, identify the hinge series and overlay, and order OEM CWS fronts, hinges, and glides when the color and fit line up. When OEM isn’t available, we specify aftermarket hardware from Blum or Grass rated for dry climates, which is where a lot of CWS repairs end up because it holds up better under desert humidity swings than the original spec. The honest call on repair versus replace comes down to the boxes. If the boxes are structurally sound and only the fronts or hardware are failing, a re-front or reface is usually more cost-effective than ripping out a full cabinet run – and it keeps the layout you already like. If the boxes have swelled and crumbled, refacing is a patch over a structural problem, and we’ll tell you that plainly. Call (844) 797-9259 for a free estimate and a written price before any work starts.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We check the CWS boxes for swelling and structural soundness, test every hinge and glide, and identify the exact line and production era – Concord, Hartford, Brookhaven, or Prelude – so we order the right parts the first time.
- 2
Written scope and price. You get a line-item price in writing before any work starts. No numbers that move at the door.
- 3
Repair or install. We replace failed hinges and glides with OEM CWS hardware when available or Blum and Grass when it fits better, re-front doors, reface where the boxes are sound, and install quartz or granite counters where the layout calls for it.
- 4
Test. Every door closes flush, every drawer glides without rubbing the face frame, and every countertop sits level before we call it done.
- 5
365-Day Done Right Promise. You get a signed written guarantee in your hand at close – if the work fails within the full year, we return and correct it at no charge. Clean site, documented scope, guarantee signed.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Boulder City
We work on the CWS lines that show up in Boulder City kitchens and closets: the Concord raised-panel cabinet with its standard overlay, the Hartford shaker-style cabinet, the Brookhaven full-overlay framed cabinet, and the Prelude laminate closet and storage system. On the install and remodel side, we do cabinet installation and refacing, kitchen design and layout, and quartz and granite countertops – and we can set countertops over existing CWS boxes when those boxes are sound. We don’t claim to carry any of this on a shelf. Everything is ordered to your job and your specific door and hardware spec.
We Also Service These Brands
We’re not a single-brand shop. Alongside CWS, we install and work around KraftMaid and Wellborn cabinetry, Cambria and Silestone quartz surfaces, and Kohler and Moen fixtures – brands with documented specs and warranties that back our own guarantee. That matters if you’re mixing CWS boxes with a new countertop or updating hardware across a kitchen that has more than one brand in it.
FAQs – CWS Construction Service in Boulder City

No. We are an independent CWS service provider and are not affiliated with, authorized, sponsored, or endorsed by CWS. We diagnose, repair, reface, and remodel around CWS cabinetry because we know how it’s built, not because the manufacturer sent us. Call (844) 797-9259 with your model and we’ll tell you honestly whether a factory warranty claim is worth pursuing before we quote a repair.
Yes, in most cases. We measure the door, identify the overlay and hinge series, and order an OEM CWS Concord front in the matching color and fit. If the finish has aged enough that a new door reads slightly different, we’ll say so up front and give you the option of re-fronting the adjacent doors to keep it consistent. Call (844) 797-9259 for a free estimate on a single-door match.
Usually not, and we won’t sell you a reface over a box that’s already failing. Soft, crumbled particleboard at the toe kick means the box itself has swelled, and refacing only hides that. We check how far the swelling has traveled before recommending anything. Call (844) 797-9259 and we’ll give you a written price on the honest repair – whether that’s a partial box rebuild or a full run.
It varies by production era, and that’s exactly why we check before ordering. Some CWS hinge bores are metric, some match standard 35mm patterns, and the mounting plate depth differs between them. Getting it wrong means a door that doesn’t sit flush or a hinge that won’t seat. We match the bore and overlay on every job and use OEM CWS hinges when available, or Blum and Grass equivalents when they fit better. Call (844) 797-9259 with a photo of the hinge and we’ll narrow it down.
Boulder City runs a touch cooler and a touch higher in elevation than the valley floor, but the UV load on west- and south-facing cabinet faces is still heavy and the monsoon humidity swings are still there. That combination is what drives thermofoil peeling on the Prelude panels and edge-lift on Hartford fronts, especially when there’s unshaded glass nearby. The fix is often as simple as a window treatment plus a hardware and finish refresh. Call (844) 797-9259 for a free estimate on what your specific kitchen needs.
Not when the work is done correctly. We don’t cut into or modify the CWS box structure in ways that break the manufacturer’s construction, and we use OEM parts where available so the original spec stays intact. If a repair would risk the warranty, we tell you before we touch anything and walk you through the factory claim route instead. Call (844) 797-9259 and we’ll sort out what’s covered.
Here are the exact written ranges we work to in Boulder City – no “call for a quote” runaround:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
A full kitchen remodel in Boulder City runs $14,000 – $45,000, and a small kitchen remodel runs $9,000 – $20,000. A single-door match or a hinge and glide refresh sits well below the cabinet installation range. You get a line-item written price before any work starts. Call (844) 797-9259 for an exact quote – estimates are free.
Yes, when the boxes are sound and level. We check the CWS boxes for swelling and confirm they’ll carry the countertop weight flat before we template, then install over the existing run – saving you the cost and disruption of a full tear-out. If a box has failed, we fix that first. Call (844) 797-9259 for a free estimate and a written price.
Book Your CWS Service in Boulder City, NV
Whether you’re matching a single Concord door, refacing a full Brookhaven run, or rebuilding a kitchen around the CWS cabinets you already have, we’ll give you a straight diagnosis, a written price before work starts, and the 365-Day Done Right Promise behind it. A live person answers around the clock. Call (844) 797-9259 to schedule your free estimate in Boulder City.
Written by the team at Bradford Remodeling Boulder City.












