







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Henderson, NV
We provide independent CWS service across Henderson, NV, working with vetted local remodeling professionals who install and repair CWS cabinetry and countertops every week. What makes our CWS work in Henderson different is the ground under it: most of this city was built after 1990 on post-tension slabs and engineered fill, so cabinets that look “defective” are usually a substrate and alignment problem. Bradford Remodeling Boulder City is an independent CWS service provider, not affiliated with or authorized by the manufacturer. We connect Henderson homeowners with independent local professionals who have real CWS install history. Call (844) 797-9259 to schedule a free estimate.
Why Henderson Residents Choose Us for CWS Service
Henderson is track-built country, and the independents we work with know it. They install CWS Concord and Richland shaker and raised-panel lines, CWS quartz and solid-surface countertop programs, and the pre-finished cabinet collections that went into Green Valley and Anthem kitchens. That matters because a CWS door that looks level in a showroom can bind in a Henderson kitchen built on a slab that moves. We match homeowners with local pros who have handled that exact geometry, not a general handyman guessing at hinge adjustment. No manufacturer authorization is implied or claimed by anyone we refer. We hold the work to a written price before anything starts and back completed projects with the 365-Day Done Right Promise. Call (844) 797-9259 for a free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Solve in Henderson
Here’s what actually shows up in Henderson CWS kitchens, and why:
- Faded shaker fronts and lifting edge-band on west-facing walls. Henderson summers run past 110°F and the UV is relentless through large west windows. CWS painted and pre-finished fronts take that exposure daily, and the finish and edge-band give out years before the box does.
- Racked doors and binding glides in frameless boxes. On Anthem and Seven Hills foothill lots, seasonal slab and fill movement twists a frameless CWS box just enough to throw doors out of plane. Hinges and glides get blamed. The floor is usually the cause.
- Cracked caulk and separated quartz seams. Track-built repetition means out-of-square walls and uneven slab runs are common. When a cabinet run isn’t shimmed flat before the template, CWS quartz joints and inside corners open up within a season or two.
- Substrate failures in early-1990s Green Valley homes. Original drywall and backsplash that were never corrected before resurfacing leave a CWS install sitting on a bad plane. It shows up later as uneven reveals and loose anchors.
- Discontinued CWS line parts. Older collections lose factory support. We source measured-matched aftermarket fronts and hardware rather than pretend a factory part still exists.
CWS Service in Henderson: What Local Conditions Mean for Your Equipment
Henderson’s Anthem and Seven Hills foothill pads sit on engineered fill and caliche with slope-retaining walls, and that single fact changes how CWS cabinets perform here. A cabinet run installed against an exterior wall on those lots is more likely to rack and separate at the countertop seam than the identical run in a flat Las Vegas proper tract. The seasonal movement of the fill transfers through the slab and framing, so the wall plane isn’t fixed the way a homeowner assumes it is. On a typical Henderson CWS kitchen job, homeowners in a late-1990s or 2000s stucco-on-frame tract report doors that won’t stay aligned, drawer glides that bind, and a quartz top that opened a hairline at the seam. The usual cause is a run set on an uneven post-tension slab and out-of-plumb walls, amplified by desert heat and fill movement, not a bad CWS door. A qualified independent pro surveys the wall and slab, shims and re-anchors the boxes to true, re-hangs or replaces the fronts and hardware, and re-templates the countertop so the seams close cleanly. That’s a fix that addresses the cause instead of a generic “redo the kitchen” pitch.
CWS Models & Products We Service in Henderson
Our referred installers work with CWS Concord and Richland shaker and raised-panel door lines, CWS quartz and solid-surface vanity and kitchen countertop programs, and CWS pre-finished and painted collections common in Green Valley and Anthem tract kitchens. Frameless and framed CWS box systems spec’d for post-tension slab installation are both in scope. On parts, we go OEM CWS doors, hinges, and drawer hardware when the line is still supported, because the finish and glide geometry have to match. For discontinued lines we use measured-matched quality aftermarket fronts and say so plainly rather than claim a “factory” part that doesn’t exist. Parts are sourced per job, not pulled from local stock. Our technicians have up to 22 years of experience, and every completed project carries the 365-Day Done Right Promise in writing.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Henderson

You get a real number up front. Here’s what CWS kitchen and cabinet work runs in Henderson:
| Service | Typical Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives cost is box condition, how far the slab or wall is out of plane, whether the countertop needs re-templating, and whether you’re refacing or replacing. A free estimate includes a wall-and-slab survey, a check of the existing CWS boxes and hardware, and a written line-item price before work starts. Call (844) 797-9259 for an exact quote – estimates are free.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Henderson
Yes. Post-tension slabs are under active cable tension and can’t be drilled or anchored anywhere you like, so cabinet anchoring has to be planned around the tendon layout. A pro surveys and maps the slab before a single anchor goes in, then shims the run flat. Call (844) 797-9259 to schedule a free estimate.
Because of Henderson’s intense UV through large west-facing windows. The finish and edge-band on painted and pre-finished shaker fronts break down faster on that exposure than anywhere else in the room. Call (844) 797-9259 for a free assessment.
Often, yes, but the seam has to be addressed first. If the crack comes from an unshimmed cabinet run rather than a failed top, we fix the substrate and re-template the countertop so the new front doesn’t just fail again. Call (844) 797-9259 to get it looked at.
HOA architectural review in Henderson’s master-planned villages can add weeks before a permit even moves, so it has to be started early. We account for that timeline in the schedule. Call (844) 797-9259 for a free estimate.
Usually, when the boxes and layout are sound. Refacing runs well under a full replacement, but only if the cabinet structure itself is holding up; if the boxes are failing, replacement is the honest call. Call (844) 797-9259 – estimates are free.
Service Areas Near Henderson
Our Henderson service area covers the 89011, 89044, 89012, and 89074 ZIP codes, and we connect homeowners throughout the region. Nearby we also cover Boulder City, Whitney, Paradise, Enterprise, and Winchester. For the CWS service expertise behind every referral, see how we match you to a local pro. If you’re in Boulder City or Whitney, we work those areas too.
Book Your CWS Service in Henderson Today
Tell us what your CWS cabinets or countertops are doing and we’ll match you with a vetted independent Henderson pro. You get a written price before any work starts and the 365-Day Done Right Promise on the finished job. Call (844) 797-9259 for a free estimate and put the work in writing.
Written by the team at Bradford Remodeling Boulder City.












