







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Driveway & Pavers: The Boulder City Owner’s Guide
If you’re searching for KraftMaid driveway and pavers in Boulder City, here’s the short answer: KraftMaid is a cabinetry and millwork brand, not a hardscape manufacturer, so there is no OEM “KraftMaid paver” part to source. What owners actually need is a paver, border, or edge-restraint system that matches the KraftMaid-led exterior package on the home, and installed paver driveway work in Boulder City runs $7,000 – $18,000. Most owners discover the problem the same way: a paver pops loose at the apron, a border course settles after a monsoon season, or the driveway starts holding water against the garage slab and the joint sand washes out every spring.
Which KraftMaid Models This Applies To

KraftMaid doesn’t publish paver model numbers because cabinetry isn’t hardscape. The relevant match is the hardscape spec tied to the exterior finish package on your home, and the brand that actually makes those units is Belgard or Unilock, both of which we install against manufacturer specs and warranties.
To identify the correct replacement paver, pull three things before you call anyone:
- Field dimensions. Measure the existing paver face and thickness in millimeters, not inches. Most paver systems run 60mm or 80mm thick, and a 60mm unit swapped into an 80mm bed leaves a lip that trips feet and traps water.
- Color and texture name. Belgard and Unilock run color names that change by production run. A “Sierra” from 2019 and a “Sierra” from 2024 can sit a shade apart in Nevada sun, which is why we match against a physical sample from your own driveway, not a swatch book.
- Bed and base spec. Paver failure in Boulder City is almost never the paver itself. It’s the base: aggregate depth, compaction, and joint sand. We check the base before quoting a swap, because a new paver on a failed base fails again inside a year.
OEM versus aftermarket cuts cleanly here. Since KraftMaid makes no paver, the “OEM” choice is the actual hardscape manufacturer. We install Belgard and Unilock pavers with documented specs and manufacturer warranties, and we match the field to your existing course so the repair reads as repair, not patch. We also install Cambria, Silestone, and Kohler products on the interior side of the same home, which is why homeowners hand us the whole exterior and interior punch list at once.
Bradford Remodeling Boulder City is an independent service provider. We are not affiliated with KraftMaid.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Driveway & Pavers Is Failing
- Loose pavers at the apron or garage transition. Vehicle weight and turning stress break the bond at the edge first. Once the edge restraint lifts, the field starts walking.
- Joint sand washing out after rain. Boulder City sits in a high-desert monsoon pattern; a single August storm can strip a poorly compacted joint. If you’re sweeping sand back in every season, the base is the problem, not the sand.
- Settlement or ponding near the slab. Water pooling against the garage wall means the base wasn’t compacted to depth or the drainage slope is off. Left alone, that water finds the slab and the footing.
- Color fade and efflorescence. Desert UV bleaches pigment over time, and mineral bloom shows as white haze on darker pavers. Fade is cosmetic; efflorescence points to moisture moving through the unit.
- Cracking or chipping at the border course. Edge units take the load from every tire and every expansion cycle. Chipped borders usually mean the restraint wasn’t set against a solid footing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest range for Boulder City. You get a written price before any work starts, in writing, and that number doesn’t move at the door.
| Scope | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the range: total square footage, base depth and compaction, edge restraint versus open border, drainage corrections, and whether the old surface needs full removal or can be overlaid. Parts and labor are quoted line by line, so you see what the paver costs and what the install costs. Every completed project carries the 365-Day Done Right Promise. If the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
Some of this you can safely check yourself. Walk the driveway and mark every loose or rocking unit with chalk. Measure paver thickness at a clean edge. Take a photo of the color and texture under full sun. Pour a bucket of water at the low spot and watch where it runs. That’s useful homework and it makes our site visit faster.
Where it goes wrong: pulling up field pavers to reset them means rebuilding the bedding layer and re-compacting the base, and a half-compacted base under a Boulder City driveway fails within one season. Cutting edge units to fit requires a wet saw, and a bad cut leaves a joint that traps water straight into the slab. This isn’t a weekend wheelbarrow job on a slope. Call us at (844) 797-9259 and we’ll quote the repair against the full replacement so you can see both numbers side by side.
FAQs

A properly installed paver driveway lasts 25 to 50 years in Boulder City’s high-desert climate, and the base does the work. UV exposure and monsoon runoff are the two things that shorten that life, and both are handled with correct compaction depth, joint sand, and a proper drainage slope.
Yes, in most cases. Isolated failures at the apron, a single sunken section, or a failed border course can be lifted, re-based, and re-set with matched units. Full replacement only makes sense when the base has failed across most of the plane or the slope needs re-grading. We quote repair and replacement side by side, and the written price is in your hand before work starts.
A localized paver repair is usually a one-day job. A full paver driveway installation runs three to five working days, weather permitting, including base prep, compaction, laying, cutting, and joint sand. We give you the schedule in writing with the price, not a verbal estimate on the driveway.
We source matched Belgard and Unilock units against a physical sample from your own driveway, and we confirm the production run and color name before ordering. Because KraftMaid makes no paver, the traceable spec comes from the hardscape manufacturer, which means the material arrives with documented specs and a manufacturer warranty that backs our own 365-Day Done Right Promise. Call (844) 797-9259 to schedule a free estimate.
Whether it’s a failed apron or a full paver driveway replacement, Bradford Remodeling Boulder City gives you the range in dollars, the scope in writing, and the guarantee signed in your hand at close. Background-checked, uniformed technicians arrive on schedule, the phone is answered by a live person 24/7, and the site is left clean. Call (844) 797-9259 for a free estimate in Boulder City.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












