A Bradford company - serving Boulder City, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Cambria · Boulder City

Cambria Bathroom Remodeling in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A whole-home remodel with the living, dining and kitchen areas opened up
A second-story addition that matches the existing roofline
A walk-in shower with large-format tile and a built-in niche
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambria Bathroom Remodeling: The Boulder City Owner’s Guide

Cambria bathroom remodeling in Boulder City runs $9,000 to $28,000 installed, and that figure holds whether you’re replacing a cracked vanity top or rebuilding the whole room around new quartz. We work with Cambria surfaces daily, and we write the price down before any work starts. Most Boulder City owners don’t discover a problem with the surface itself – they discover it at the seam. A hairline crack near the faucet, a chip at the front edge where someone set down a hairdryer a little too hard, or a stain that won’t lift because the factory seal wore through years ago. That’s usually when the call comes in.

Call (844) 797-9259

Which Cambria Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Cambria is engineered quartz, not natural stone, which matters for how it’s cut and repaired. Unlike granite or marble, Cambria slabs are non-porous and don’t need resealing, but they are harder and less forgiving of impact at edges and corners. Every Cambria slab carries a series name and a color code on the back, and that code is what a fabricator needs to match a replacement piece to your existing counter. Check the underside of your overhang or the back edge near the wall – the label is often still legible.

The practical gotcha: Cambria slabs come in standard thicknesses, and older Boulder City installs sometimes used a 2cm slab with a built-up edge rather than a full 3cm slab. If you’re matching a partial replacement to an existing counter, the fabricator needs to confirm thickness and edge profile before cutting, because a 3cm piece won’t sit flush against a 2cm built-up edge without reworking the whole run. For a full replacement, that mismatch disappears.

OEM versus aftermarket: Cambria itself doesn’t sell “parts” the way a faucet brand does – the slab is the material, and the fabrication is the craft. That means the real decision is which fabricator cuts and installs it, not which part number you order. We work from Cambria’s documented material specs so the seam placement, overhang support, and sink cutout follow the manufacturer’s guidance rather than a guess. Bradford Remodeling Boulder City is an independent service provider and is not affiliated with Cambria.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambria Bathroom Remodeling Is Failing

  • A crack radiating from the sink cutout. Cutouts concentrate stress, and a thin or unsupported rim around the basin is where quartz fails first. This usually traces back to inadequate substrate under the counter.
  • A chip or nick along the front edge. Cambria resists scratches but not a dropped object or a hard bump at the edge. Small chips can sometimes be filled and blended; larger ones call for a section replacement.
  • Visible seam separation. If you can catch a fingernail in the seam between two slabs, the adhesive has failed or the substrate shifted. Boulder City’s summer heat cycling through the house can work a poorly supported seam loose over time.
  • A dull or cloudy patch that won’t clean up. That’s usually surface wear from abrasive cleaners, not a stain. Quartz doesn’t absorb liquid, so a mark that won’t lift is physical damage to the finish, not something soaked in.
  • Sagging or a hollow sound when tapped. This points to the cabinet or substrate below, not the quartz itself. Tapping across the counter and hearing a hollow note means the slab isn’t fully supported.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled primary bathroom with a soaking tub and walk-in shower

Bathroom remodeling in Boulder City with Cambria surfaces falls between $9,000 and $28,000 installed, depending on scope. A smaller bathroom remodel runs $5,000 to $12,000. Countertop installation alone – new Cambria vanity top, cut, seamed, and set – runs $2,000 to $6,500. A bathroom vanity installation runs $800 to $3,000.

Scope Installed Range
Full bathroom remodel with Cambria surfaces $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Cambria countertop installation $2,000 – $6,500
Vanity installation $800 – $3,000

What drives the range: slab selection and square footage, edge profile complexity, sink cutout and faucet drilling, number of seams, and whether the substrate or cabinetry below needs correction before the new surface goes down. Every project gets a written line-item price before work begins – the number doesn’t move at the door. All completed work carries the 365-Day Done Right Promise: if the installation fails within a full year, we return and correct it at no charge.

DIY or Call Us?

What you can safely check yourself: the label on the underside of your counter for the color and series code, whether the counter rocks or sounds hollow when tapped, and whether a chip is shallow enough to fill. Photograph the seam or damage and measure your counter depth – those details speed up an accurate quote.

What you shouldn’t attempt: cutting, seaming, or resetting a Cambria slab. Engineered quartz is heavy and dense, and a slab that shifts during a DIY removal can crack through the cutout or injure whoever is holding it. The material also requires wet-cutting with the right blade and dust control, which isn’t a garage project. If a seam has opened or the slab is unsupported, that’s a fabrication and substrate job, not a tube-of-adhesive job. Call (844) 797-9259 and we’ll walk through what you’re seeing and what it takes to fix it correctly.

FAQs

A remodeled living room with built-in shelves around the fireplace

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelves

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch