







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Windows & Doors: The Boulder City Owner’s Guide
We install Kohler-compatible windows and doors in Boulder City, and most window or door swaps land between $4,500 and $15,000 installed for a standard replacement, with impact-rated units running $8,000 to $25,000 when the whole house is done. You’ll get a written price before any work starts, and the work carries our 365-Day Done Right Promise. Owners usually discover the failure the same way: a door that suddenly needs a shoulder to close, a window that fogs between the panes, or a lock that won’t throw all the way. Those are the parts talking, not the frame.
Which Kohler Models This Applies To

Kohler’s window and door hardware is a different animal from their plumbing line, and that’s the first compatibility trap Boulder City owners hit. Kohler door hardware (handlesets, deadbolts, and multi-point trim) is spec’d by backset and bore, not by a series number stamped on the face. Most residential doors are a 2-3/8-inch or 2-3/4-inch backset, and a replacement that’s off by even an eighth of an inch won’t seat. Check the door edge, not the old handle, for the mortise cutout.
On the window side, Kohler-branded and Kohler-spec window hardware (sash locks, tilt latches, balance shoes) is matched to the window manufacturer’s sash profile, so the Kohler part number on the old operator rarely maps cleanly to a new one. Pull the label from the window jamb – it lists the manufacturer, the series, and often a glass date code – and measure the visible glass and the sash height. OEM hardware is the safe call for anything under a decade old; quality aftermarket equivalents are fine for a balance shoe or a latch, but we don’t substitute on multi-point door locks, where the tolerances are tight and a mismatch shows up as a door that won’t seal.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Windows & Doors Is Failing
- The door drags or needs a lift to close. Usually a worn hinge or a settling frame; in Boulder City’s heat, the vinyl or wood frame expands and the reveal closes up by midsummer. If it started in late spring, suspect thermal movement, not the hinge.
- The window fogs between the panes. A failed sealed unit – the desiccant is saturated and the seal is gone. This is a glass replacement, not a hardware swap, and no amount of resealing the frame fixes it.
- The lock won’t throw or the handle is loose. A stripped spindle, a worn cam, or a backset that was marginal from day one. It’s a two-minute check with a screwdriver and a five-minute fix once the right part is in hand.
- The sash won’t stay up, or it drops. A failed balance – the spring or block that counterweights the sash has given out. This is the most common Kohler-spec window failure we see and the most often misdiagnosed as “the window is just old.”
- Draft or water at the threshold. Worn weatherstripping, a misadjusted strike, or a sill that’s no longer shedding water. On our desert side of the valley, dust and grit grind the seals down faster than most owners expect.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Boulder City, figure $4,500 to $15,000 for a full window replacement and $8,000 to $25,000 for impact window installation across the house. A single door or window hardware swap sits at the low end; whole-house replacement with new frames, trim, and sealing sits at the top. The range is driven by unit count, glass spec (impact versus standard), frame material, and whether the rough opening needs work.
Every estimate is line-item and written before we start – parts, labor, disposal, and trim are separate lines, and the number doesn’t move at the door. Parts are sourced to the model and spec you have, not swapped for whatever’s on hand. The finished work is covered by our 365-Day Done Right Promise: if the install fails within that year, we come back and correct it at no charge. We work with a documented roster of name-brand materials – Kohler, Therma-Tru doors, James Hardie exterior products – so the spec is traceable. We also install KraftMaid, Cambria, and Silestone in the interiors that usually pair with a window or door project.
DIY or Call Us?
You can safely check a door’s backset, measure a window’s visible glass, pull the jamb label, and tighten a loose handle. That’s the useful half of the job, and it saves us time on the quote. Where it goes wrong: forcing a multi-point lock that’s binding, prying a sash out of a balance you haven’t identified, or resealing a fogged unit that’s failed internally – all of those turn a $200 part into a $2,000 frame repair. On a second-story window or a heavy impact door, the height and weight are the risk, not the tool. If the part is under tension or the unit is above shoulder height, stop and call. We’re an independent service provider, not affiliated with Kohler, and we’ll tell you straight whether it’s a part or a full unit. Call (844) 797-9259 for a free estimate.
FAQs

How long does Kohler window and door hardware last in Boulder City? Expect 10 to 15 years on hardware and 15 to 20 on a sealed window unit – shorter than the manufacturer’s lab numbers, because our summer heat and dust cycle wear seals and finishes faster than a mild climate. If a unit is past 15 years and fogging, replace it rather than repair it. Call (844) 797-9259 for an exact quote – estimates are free.
Can the part be repaired instead of replaced? Sometimes. A stripped latch, a loose handle, or a balance shoe can be swapped without touching the frame or glass. A failed sealed unit or a frame that’s out of square can’t be repaired in place; those are replacements. We’ll tell you which one you have before any work is priced. Call (844) 797-9259 for an exact quote – estimates are free.
How long does the swap take? A hardware swap is typically a one-visit job, an hour or two. A single window unit is usually a half-day. A whole-house replacement runs several days to a week depending on unit count and whether openings need work. You’ll get the schedule in writing with the price. Call (844) 797-9259 for an exact quote – estimates are free.
How do you source the part? We match by the jamb label and the measured backset or sash profile, then order to the manufacturer spec – OEM where tolerances are tight (multi-point locks, impact-rated units) and quality aftermarket only where the spec allows. Nothing is substituted without your sign-off. Call (844) 797-9259 for an exact quote – estimates are free.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












