







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Driveway & Pavers: The Boulder City Owner’s Guide
Kohler driveway and paver work in Boulder City typically runs $7,000 to $18,000 installed for a full paver driveway, and most scheduled installs start within one to two weeks of a signed written quote. The range holds steady because we quote the grade, the substrate, and the drainage plan before the first pallet lands. Homeowners usually discover a failure the same way: a paver shifts after a monsoon, the joint sand washes out, or a concrete transition at the garage apron cracks and the pitch starts pulling water toward the slab instead of away. Kohler’s hardscape line sits inside a documented brand roster we install to manufacturer spec, so the spec sheet, the warranty terms, and our own written guarantee all line up.
Key Takeaways
- Expected installed range in Boulder City: $7,000 to $18,000 for a paver driveway; sealing runs $250 to $700.
- We are an independent service provider working with Kohler-specified materials. We are not affiliated with Kohler.
- Written price before work starts, every time, backed by the 365-Day Done Right Promise.
- Every project carries a full-year written guarantee: if the work fails inside that window, we return and correct it at no charge.
Which Kohler Models This Applies To

Kohler’s hardscape and paver systems are specified by profile and series rather than a single stamped model number, which trips up a lot of owners trying to match a piece from memory. The identifier lives on the original submittal or delivery paperwork, and it matters more than the color name. Profile height, edge restraint style, and whether the system is a plank-style or a square-and-rectangle module all change what fits against your existing field.
Here’s the compatibility gotcha we run into constantly in Boulder City: two pavers can share an identical face color and still differ by a few millimeters in profile height, and that difference shows up as a rocking joint two summers later. Pull the original product label or take a caliper measurement across the top face and the edge chamfer before you match anything. On the OEM question, Kohler’s spec-matched units are the safe bet when your field is intact and you need a localized repair. A quality aftermarket equivalent is defensible when you’re replacing a whole course and the manufacturer spec sheet shows matching compressive strength and freeze-thaw rating. What we won’t do is swap an aftermarket piece into a half-worn field and call it a match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Driveway & Pavers Is Failing
Boulder City sits in a high-desert climate with brutal summer surface heat and the occasional hard freeze at night in January. That swing is what kills paver systems that were installed without a proper base.
- Rocking or loose pavers. The paver has lifted off its bedding sand, usually because water got under the edge and pumped the base. A single rocking unit becomes a spreading ring within two seasons.
- Joint sand washing out after rain. Polymer joint sand should lock the field. When it rinses out, the base is either draining toward the joints instead of off the slab or the sand was never installed to the right depth.
- Cracks at the garage apron or driveway transition. The apron is a rigid concrete edge meeting a flexible paver field. When the restraint isn’t set right, that seam cracks and starts pulling water toward the foundation.
- Efflorescence or white haze on the surface. Mineral salts migrating up through the paver. Sometimes it’s cosmetic, sometimes it signals moisture trapped in the base. We check the pitch before we treat it.
- Sunken low spots or ponding. Standing water after a storm means the grade is off. Ponding next to the slab is the failure that matters most, because that’s the water that finds the foundation.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

We quote hardscape work as a written line-item price before any material is ordered. Boulder City numbers look like this:
- Paver driveway installation: $7,000 to $18,000
- Concrete driveway installation: $4,500 to $12,000
- Driveway replacement: $5,000 to $14,000
- Driveway sealing: $250 to $700
- Paver patio installation: $3,500 to $11,000
What moves the number is square footage, base excavation depth, edge restraint, and whether the old surface has to come out. A straight paver replacement on a sound base sits low in that range. A driveway that needs a full re-grade against the slab sits high. The written quote itemizes materials and labor separately, so you can see exactly where the money goes. Every install is covered by our 365-Day Done Right Promise: if the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely inspect what you have. Pull a paver if it lifts by hand, check for base material under it, and look at the edge restraint at the slab. What you should not do is re-lay a paver system over a compromised base or re-grade the pitch near your garage yourself. Get the drainage wrong and you’ll move water toward the foundation, and that repair costs far more than the original install. There’s no high-tension or gas hazard here, but there is a real risk of creating a slab problem you can’t undo cheaply.
If you’re replacing more than a handful of units, or if you see any sinking near the slab, that’s a call. Phone is answered by a live person 24 hours a day, seven days a week. Call (844) 797-9259 to schedule a free estimate.
FAQs

A properly installed paver driveway lasts 25 to 30 years in Boulder City’s climate. The pavers themselves outlast the base: the failure point is the bedding sand and edge restraint, not the surface unit. If you keep the joint sand topped up and seal every few years, the field stays tight. Call (844) 797-9259 for a free assessment – estimates are free.
Usually yes, if the failure is localized to one area. A single rocking paver or a section of washed-out joint sand can be lifted, re-bedded, and re-sanded without touching the whole driveway. Full replacement only makes sense when the base has failed across a large area or the pitch against the slab is wrong. Call (844) 797-9259 for a free estimate and we’ll tell you which one you’re looking at.
A localized repair takes half a day. A full paver driveway install runs three to five days depending on square footage and how much base excavation is needed. We schedule the work, confirm the start date in writing, and don’t leave the site half-finished overnight. Call (844) 797-9259 to schedule your free estimate.
We source through manufacturer-authorized channels with documented specs and warranties, not grey-market pallets. That means every piece we install has a paper trail, and if there’s a defect, the warranty claim routes correctly. We work with a documented roster of name-brand materials including Kohler, Belgard, and Unilock for hardscape, plus KraftMaid, Cambria, and Silestone on interior work. Call (844) 797-9259 to schedule a free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












