







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Windows & Doors: The Boulder City Owner’s Guide
Replacing a failed Moen window or door component in Boulder City typically runs $450 to $1,200 installed for a single unit repair, or $4,500 to $15,000 for a full window replacement project using Moen-compatible hardware. We install and repair Moen hardware, hinges, locks, and weather-sealing on windows and doors throughout Boulder City, and we quote every job in writing before a tool comes out. Most owners find us the same way: a window that won’t lock, a door that drags or won’t latch, or a hinge that has loosened until the sash sags and daylight shows through the frame.
The first sign is usually a draft that wasn’t there last season, or a handle that turns but no longer catches. In Boulder City, that draft gets worse after a summer of heat expansion and a winter of cool nights pulling the frame back. Call (844) 797-9259 for a free estimate and we’ll tell you what’s actually wrong before quoting a fix.
Which Moen Models This Applies To

Moen builds window and door hardware across a range of model families, and the part that fits one will not fit another. What matters is not the brand name on the frame but three things you can measure yourself before you call.
- Sash or panel size. Measure the glass opening at the frame, not the outer trim. Moen replacement sashes come in fixed widths, and a half-inch error means the new sash won’t seat against the weatherstripping.
- The hardware stamp. Look at the lock, hinge, or handle plate. A model or part code is often stamped on the underside or inside edge. Photograph it clearly.
- Operator type and swing. Casement, awning, double-hung, sliding, or hinged door. Plus which way the door swings. Moen’s door hardware lines are handed, meaning a right-hand unit won’t work on a left-hand opening.
The OEM question. For a window or door hardware part, OEM Moen replacements match the existing frame exactly and keep the original warranty valid. A quality aftermarket equivalent can cost 30% less and do the job, but only if the specs match on all three measurements above. We work with documented brands including KraftMaid, Cambria, and Silestone on the interior side of the same jobs. We are an independent service provider and are not affiliated with Moen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Windows & Doors Is Failing
Window and door hardware fails in a predictable order. These are the symptoms we see most often in Boulder City homes:
- A draft that appears when the wind picks up. The weatherstripping has compressed or the frame has shifted out of square. In Boulder City, the seasonal swing between 110-degree summers and cool nights works the seals harder than most places, and a seal that held for years can fail in one season.
- A lock that turns but doesn’t hold. The latch or keeper is worn or misaligned. Left alone, the sash won’t latch tight against the frame and the gap gets wider with every use.
- The door drags on the threshold or hits the frame. A hinge has loosened or the door has sagged, most often after repeated heat expansion. A dragging door will eventually fail to close at all.
- Visible separation of the glass from the sash. The glazing seal has broken, letting in moisture. In our climate, the moisture hides in the frame joint until you see fog between the panes or water inside the sash.
- A handle or hinge that feels loose in the hand. The mounting screws have pulled from the frame, often because the original threading was too shallow for the material.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Moen window and door work runs in Boulder City, quoted as a written price before anything starts:
- Single hardware or component repair: $450 to $1,200 installed (handle, hinge, lock, weatherstripping, or sash adjustment).
- Full window replacement, Moen-compatible hardware: $4,500 to $15,000, depending on size, frame material, and how many windows.
- Impact-rated window installation: $8,000 to $25,000 for homes needing or choosing the higher spec.
What pushes the range: sash size and count, whether the existing frame is salvageable, and whether glass or just hardware needs replacing. A single loose hinge is a one-visit job. A door that has pulled its frame out of square is not. Every job includes a written line-item price, and when we finish, you get a signed written guarantee in hand. Every completed project carries our 365-Day Done Right Promise. If the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
Some checks are safe to do yourself. Tighten a loose handle screw with a screwdriver. Push the sash to check for movement. Run a hand along the frame edge on a windy day to find a draft. Photograph your hardware codes.
But windows and doors sit on a frame that has to be plumb, square, and weathertight. The part that fails after a DIY swap is almost always the seal, not the hinge. A sash that fits slightly wrong allows water into the frame joint. That water shows up as rot or mold months later, and the repair is no longer a hardware swap. If you are on a second-story opening, on a sliding patio door, or unsure which model you have, call us. Our technicians have up to 22 years of experience and every one is background-checked and uniformed before they walk through your door.
FAQs

Expect the hardware itself to hold 10 to 15 years, but the weatherstripping and glazing seals in Boulder City often give out sooner because of the heat. High summer temperatures expand the frame and compress the seals, and the cool nights shrink the frame back. That cycle is what ages the seals faster than the hardware. Call (844) 797-9259 for a free estimate if a seal is failing.
Yes, often. A hinge, lock, or handle swap is a single-visit repair, and we can adjust a sash that has shifted out of square in many cases. Repair stops being the right answer when the glass seal has failed or the frame joint has taken on water. We’ll tell you which one you have after we look. Estimates are free.
A single hardware swap is typically a one-day visit for one tech. A full sash or glass replacement usually takes one to two days depending on size and access. A full window replacement project runs longer, and we’ll put the timeline in the written quote so nothing moves mid-job.
We match the part to your model by code and by measurement, then order the correct unit rather than carrying guesswork. As an independent service provider we’re not affiliated with Moen, and we don’t claim parts on a truck. Every install works from your code and measurements, and the written price is set before we order. A live person answers the phone 24/7 at (844) 797-9259.
Get a written price before any work starts. Bradford Remodeling Boulder City works to The Garrison Standard: background-checked, uniformed technicians, live-person phone coverage at all hours, and the 365-Day Done Right Promise on every completed job. Call (844) 797-9259 for your free estimate, and we’ll put the full scope, the price, and the guarantee in writing before anyone picks up a tool.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












