







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Home Additions & ADU: The Boulder City Owner’s Guide
Moen fixtures and finish packages belong to a specific plumbing and hardware family, and when we build a home addition or ADU in Boulder City, the Moen spec is one of the first things we lock down. Home additions here run $45,000 – $130,000; attached and detached ADUs run $90,000 – $220,000. Because these are planned builds, not emergencies, we don’t promise same-day anything; we promise a written price before work starts and a documented scope for every Moen rough-in and trim set.
Owners usually discover a Moen mismatch the hard way: a shower valve that needs a cartridge the local hardware store doesn’t stock, a roman tub filler whose rough-in valve body won’t accept the trim kit they ordered, or a freestanding tub filler that arrived with the wrong inlet spacing. By the time the tile is set and the drywall is closed, the wrong Moen part means cutting it back open. That’s why we list every Moen model number in the written scope before demolition day in Boulder City.
Which Moen Models This Applies To

Moen’s catalog splits into families that don’t swap freely. The M-CORE and 1222/1225 cartridge series belong to specific valve bodies; a Posi-Temp trim kit will not seat on a Moenflo rough-in, and a Moentrol valve (the pressure-balancing model with the pull-out temperature control) takes a different cartridge than the Posi-Temp push-pull style. Roman tub fillers and freestanding tub fillers each use their own valve body, so a trim kit is only half the part. Kitchen and bath faucets (single-handle 1255 cartridges vs. two-handle models) follow the same rule.
To identify the right part before you order anything: pull the trim plate off the valve, read the model number stamped on the rough-in valve body, measure the cartridge stem length and diameter, and photograph the valve face. For faucets, the cartridge number is usually printed on the cartridge itself or cast into the handle base. When you call, give us that number, not just the showroom finish. The OEM-vs-aftermarket decision matters here: Moen OEM cartridges carry the factory warranty, and a $12 aftermarket cartridge often uses a different ceramic disc formulation that fails faster in Boulder City’s hard water. We source Moen OEM unless you specifically ask otherwise.
A note on affiliation: Bradford Remodeling Boulder City is an independent remodeling contractor, not affiliated with or an authorized dealer of Moen. We install and specify Moen products as part of our documented brand roster, which also includes Kohler, KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Home Additions & ADU Is Failing
- Shower or tub faucet drips when the handle is off. The cartridge’s ceramic disc is scored or the O-rings have hardened. In our experience, that’s the most common Moen call we get after a hot summer.
- Handle feels stiff or doesn’t move smoothly through the temperature range. Calcium and magnesium scale (Boulder City water is notably hard) has built up inside the cartridge barrel. A cartridge that “binds” often precedes a full failure within weeks.
- Water temperature won’t hold steady when another fixture runs. The pressure-balancing spool inside a Moentrol valve has failed, or the valve body was installed without the balancing cartridge. This is a safety issue because a sudden drop in cold supply can scald.
- Water seeps from behind the trim plate or onto the tile. The rough-in valve body has cracked from freeze damage, or the joint between the valve and the pipe has loosened. A cracked rough-in is a tear-out, not a repair.
- Rough-in valve and trim kit don’t match. The homeowner or a previous contractor bought a trim kit for a different Moen family. This one is discovered during the build, and it’s the single most preventable ADU delay we see.
Replacement Cost & What’s Included

When the Moen package is part of a home addition or ADU build in Boulder City, our installed pricing runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for an ADU, with every Moen rough-in and trim set itemized in the written scope. Standalone replacement of a Moen shower or tub valve (which is a small part of a bigger job, not a parts-and-labor swap) is quoted as part of the plumbing allowance inside that build, not as a separate surprise line.
What drives the range: how many wet walls you’re adding, whether the roughed-in valve bodies are new construction or matched to existing trim, whether a standard Moen valve body can be used instead of a custom-mount, and whether the tub filler is freestanding (which requires a different rough-in floor box). Every Moen part is named by model number in the written price. Nothing moves at the door.
All completed work is covered by the 365-Day Done Right Promise – a full year of written coverage on the project; if anything we installed fails in that window, we come back and correct it at no charge. Moen’s own product warranty is separate and passes to the homeowner, and we hand that documentation over at close.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a real split here. What you can safely check yourself: read the Moen model number off the trim plate and rough-in valve, photograph the cartridge, look up the part number against Moen’s own spec sheet, and note whether water is seeping at the rough-in or the trim. Do not open the wall to inspect a shower valve while the supply is live, and do not attempt to repair a pressure-balancing valve body yourself. That’s a scalding risk as much as a plumbing risk – get it to a trained professional.
Where DIY goes wrong in an ADU or addition: replacing a cartridge on an existing valve body is a 20-minute job for a pro with the right puller, but a homeowner who forces a stuck cartridge can crack the valve body, which means cutting open the finished wall and re-piping. We’ve walked into Boulder City jobs where a trim kit was ordered for the wrong Moen family and the tile was already set. Call (844) 797-9259 to schedule your free estimate; a live person answers 24/7.
FAQs

Most Moen cartridges need their first replacement somewhere between 8 and 15 years depending on water hardness and use. Boulder City’s mineral-heavy water pushes the shorter end of that range, and a pressure-balancing valve used in a high-traffic ADU bathroom can wear faster. Our technicians have up to 22 years of experience with Moen plumbing. Call (844) 797-9259 for a free estimate if the cartridge is more than a decade old.
Usually yes, if the rough-in valve body is sound – a scored cartridge can be swapped out with the correct Moen OEM cartridge, which is the cheapest fix. If the rough-in valve body is cracked or frozen, it has to be replaced, and that’s a wall-open job. We’ll tell you which one you have in the written scope before you commit. Call (844) 797-9259 for a free estimate.
A cartridge swap is usually 30 to 60 minutes if the valve body is healthy. Rough-in valve replacement behind finished tile is a half-day to a full day including the wall repair and trim re-set. We put both time ranges in the written scope so nothing surprises you on the day of work. Call (844) 797-9259 for a free estimate.
We source by model number, not by showroom finish and not by a guess at the store shelf. You give us the stamped number on the rough-in valve body or the cartridge, we match it to the Moen spec, we confirm OEM vs. aftermarket with you, and we write the part into the scope. We don’t claim to carry Moen parts in stock or on a truck – we order the exact part and you see it named in the written price before work starts. Call (844) 797-9259 for a free estimate.
Ready to Give a Moen Build the Price It Deserves?
Whether you’re planning a full home addition or a detached ADU in Boulder City, the Moen fixtures are only one line in a much longer spec – and every line deserves a written price. Bradford Remodeling Boulder City works with a documented roster of name-brand materials including Moen, Kohler, KraftMaid, Cambria, and Silestone, so the part numbers are traceable and the quality isn’t left to guesswork. Every project gets a written price before a single tool comes out, background-checked and uniformed technicians on the job, and a live person answering the phone around the clock. And every completed job carries the 365-Day Done Right Promise – a full year of written coverage. Call (844) 797-9259 to schedule your free estimate. No pressure, no slots, no countdowns – just a straight number in writing.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.
Bradford Remodeling Boulder City is part of the Garrison Partners family, established in 2004, and is independently owned and operated under The Garrison Standard.












