







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Home Additions & ADU: The Boulder City Owner’s Guide
American Standard additions and ADU projects in Boulder City typically run $45,000 – $130,000 depending on square footage, foundation work, and finish grade, and additions are scheduled work, not same-day work: a typical Boulder City addition takes several weeks from permit approval to final inspection. ADU construction in Boulder City runs higher, from $90,000 to $220,000, and garage conversions land between $30,000 and $80,000. Owners usually discover a failing addition long before it fails completely: a hairline crack that widens each season along the joint where the new slab meets the original house, a door that starts sticking in spring and frees up by summer, or a roofline that no longer meets the original wall cleanly.
Key Takeaways
- Boulder City additions run $45,000 – $130,000; ADUs run $90,000 – $220,000; garage conversions $30,000 – $80,000.
- The failure point is almost never the room itself. It is the foundation transition, the roof tie-in, or the permit file.
- Bradford Remodeling buys through the same documented American Standard material channels as any reputable local contractor. We are an independent service provider, not affiliated with American Standard.
- Every project gets a written price before a single tool comes out, and the 365-Day Done Right Promise covers the work for a full year.
Which American Standard Specifications Apply to Your Boulder City Addition

American Standard does not make a “home addition part” you can pull off a shelf. What homeowners actually need replaced or matched on a failing addition is a system: the foundation tie, the roof flashing and soffit connection, the exterior cladding (James Hardie fiber cement is common here), and the door and window units (Therma-Tru and American Standard’s own door line appear frequently on Boulder City additions). That changes what “which model do I have?” means.
To identify what is actually on your addition, look for three things:
- The permit file. Boulder City Building Department keeps plans for past additions. A permit drawing gives you the exact spec on the foundation, framing, and roof tie-in, and any reputable contractor will ask for it.
- The door and window labels. American Standard door and window units carry a manufacturer label on the frame jamb. Photograph it. That label tells you the series and lets us match the exact replacement unit rather than measure and guess.
- The substrate and cladding. If you are replacing soffit or siding panels, the substrate (the structural backing behind the panel) matters more than the panel brand. American Standard cladding profiles from the 1990s and 2000s are still matched, but only if the profile is measured at the face and the reveal, not at the edges.
The OEM-vs-aftermarket call runs differently on an addition than on a plumbing fixture. For windows and doors, OEM or a documented manufacturer alternative (Therma-Tru, for example) is worth the difference: the door slab has to match the frame, and the warranty chain has to stay unbroken. For flashing and cladding, aftermarket is fine if the manufacturer spec sheet comes with it. Ask for the spec sheet on any replacement part. No spec, no purchase.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Addition or ADU Is Failing
- A crack that widens season to season along the foundation joint. This is differential settlement where the addition slab meets the original footing. Boulder City’s caliche-heavy soil and hot-day/cool-night swings move that joint. A crack that stays the same width is cosmetic. A crack that grows every spring needs an engineer.
- Doors and windows that stick in spring and free up by summer. That pattern points to moisture and ground movement under the addition slab, not a bad hinge. It is the footprint of a failing foundation tie or a missing vapor barrier under the slab.
- Water staining on the interior ceiling near the addition roof tie-in. The roof flashing where the addition roof meets the original roofline is the most common failure on Boulder City additions. A small stain on the ceiling drywall almost always maps to a flashing or step-out failure on the exterior.
- Soft or bubbling cladding on the addition’s exterior wall. James Hardie fiber cement is durable, but the substrate behind it fails if the WRB (weather-resistive barrier) was not lapped correctly. Look for bubbling paint or a soft spot that gives under thumb pressure.
- No permit file or a red-tag notice at city inspection. A Boulder City addition without a clean inspection record becomes a problem at resale. If the addition was never permitted or signed off, the corrective scope can run $15,000 – $40,000 on top of repair work.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Every number below is a written range, and the written price you get before work begins does not move. Here is what Boulder City additions actually cost:
| Scope | Written Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range on an American Standard-spec addition: foundation depth (Boulder City caliche requires engineered footings in some lots), roof tie-in complexity, whether the addition gets its own HVAC zone, and finish grade. What is included in every Bradford Remodeling quote: permit pull and inspection, demolition and haul-away, structural work, and a written scope that spells out every line item. Calls are answered by a live person 24/7, and there is no reprice at the door. The 365-Day Done Right Promise covers the finished work for a full year. If a flashing detail, a foundation tie, or a door fit fails within that period, we come back and correct it at no charge.
DIY or Call Us?
Safe for a homeowner to check: the permit file at the Boulder City Building Department, the American Standard door and window labels on the frame, and visual water staining on ceilings and exterior cladding. Those checks do not require lifting a tool.
Not safe for DIY, and not worth the risk: foundation tie repair, roof flashing work over the addition, and any structural cladding replacement. These involve working on a roof edge, opening the building envelope, and doing work that a Boulder City inspector will sign off on only if the flashing and sheathing are correct. A homeowner-caulked flashing can look fine for two or three seasons and then start a mold problem behind the drywall. The honest answer for anything structural is: hire it out, with a written price.
Our technicians have up to 22 years of experience on structural and finish work, and every one who shows up is background-checked and uniformed. When you call, you’ll know exactly who is coming. Free estimate, written price, and a fixed number before work starts: call (844) 797-9259.
FAQs

Twenty-plus years if the flashing and foundation were done to code. Boulder City’s hot days and cool nights plus the soil under the slab are the two things that shorten that window; a properly flashed roof tie-in and a correct footing often outlive the finish. If you’re seeing a growing crack or a ceiling stain, call (844) 797-9259: the earlier a flashing or foundation issue is caught, the smaller the repair.
Often yes. A step-out flashing repair, a refastened bay window, or a parge-and-seal on a stabilize level crack is usually a repair, not a rebuild. What cannot be repaired is a foundation tie that has moved, or a roof tie-in that has no correct flashing under the shingles. Call (844) 797-9259 for a free estimate that tells you which one you’re looking at.
A Boulder City addition typically runs several weeks from signed contract to final inspection, and the permit review period adds real time on top of that. ADU construction runs longer because of the separate utility and inspection requirements. Every timeline is written into the contract before work starts; no surprises on the length or the price. Call (844) 797-9259 for a written schedule with your free estimate.
Through American Standard’s authorized material supply channels and the manufacturer spec sheets, which come with every order. We do not stock parts on a truck; the correct unit is ordered to your project spec and verified against the label photograph before install. American Standard, Therma-Tru, James Hardie, and GAF are all in our documented brand roster, along with KraftMaid, Cambria, and Silestone for interior finish work. Call (844) 797-9259 for a free estimate, and we’ll verify the spec before any price is written.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.
Call (844) 797-9259 for a free estimate. Every project gets a written price before work starts and a 365-Day Done Right Promise on the finished work. We are an independent service provider and are not affiliated with American Standard.












