







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Bathroom Remodeling: The Boulder City Owner’s Guide
Toto-compatible bathroom remodeling in Boulder City runs $9,000 – $28,000 for a full room, and smaller scopes land between $5,000 and $12,000. The price you get is written down before any work starts, with no numbers that move at the door. Most Boulder City homeowners call us after a specific failure: a Toto toilet that won’t stop running, a fill valve that hisses all night, or a washlet seat that quit mid-cycle. Those symptoms are usually the entry point. What follows is the guide we’d give a neighbor who owns a Toto and wants the room brought back to spec, not just patched.
Key Takeaways
- Full Toto bathroom remodeling in Boulder City: $9,000 – $28,000; smaller rooms: $5,000 – $12,000.
- Most Toto failures trace to a fill valve, flapper, or supply line, not the bowl or the seat.
- Pricing is written before work begins, every time. No exceptions.
- Every completed project carries the 365-Day Done Right Promise – if it fails inside that year, we come back and correct it at no charge.
- Live person answers the phone around the clock, seven days a week.
Which Toto Models This Applies To

The Toto version of a bathroom fixture isn’t a single product, and the parts inside it aren’t universal. Toto’s lineup splits into families – Drake, Ultramax, EcoProminence, Aquia, Carlyle, and the high-end Neorest washlet line – and the internal fill and flush mechanisms differ across them. A Drake II takes a different fill valve assembly than an Ultramax, and the washlet seat on a Neorest isn’t the same unit that fits a standard C200 seat.
Here’s the compatibility check most people miss: the model number lives on a sticker inside the tank lid, and on some Toto toilets it’s stamped into the porcelain at the back of the bowl. Pull the lid, look, and write it down before you call anyone. Toto also publishes a fill-valve compatibility chart that maps model families to replacement assemblies, and getting that wrong is the number-one reason a fresh install runs constantly or fills too slowly. The wrong flapper on a 3-inch flush tower won’t seal, no matter how well it fits.
On the OEM-versus-aftermarket question: Toto-brand replacement fill valves and flappers run higher than generic equivalents, but the seal quality and fitment are worth it on the higher-end lines. For a standard Drake or EcoProminence, a well-made aftermarket assembly (Korky, Fluidmaster) works fine if the part number matches. We recommend OEM on Neorest and washlet components because the electronics and water path are proprietary.
Bradford Remodeling Boulder City is an independent contractor. We’re not affiliated with Toto. We source parts to spec and install them to manufacturer instructions, and we’ll tell you plainly if your model takes something we can’t match cleanly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Bathroom Remodeling Is Failing
- The toilet runs for minutes after a flush. The fill valve or flapper isn’t sealing. A worn flapper lets water leak into the bowl continuously, and the fill valve keeps topping off the tank to compensate.
- Water on the floor around the base. A dried-out or cracked wax ring is the usual cause. In Boulder City’s dry climate, seals dry out faster than they do in humid regions, so we see more of these here than you’d expect.
- The washlet seat won’t heat or sprays unevenly. The seat’s power supply or internal valve body is failing. This is not a DIY repair on a Neorest – the electronics and water lines are integrated.
- Weak flush or a stubborn water level. Mineral scale builds up in the valve and rim jets over time. Boulder City draws from a hard-water supply, so we recommend a simple maintenance schedule for all the fixtures, not just the toilet.
- A hiss or whistle that never stops. That’s the fill valve telling you the seat inside it is worn. It’s a small part, but ignoring it costs you on every water bill.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the numbers look like for Boulder City, based on real scope, not a teaser quote:
| Scope | Installed Price Range |
|---|---|
| Full Toto bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the number: whether the room is gutted or refreshed, whether the rough-in plumbing and electrical need to change, and the fixture tier. A Toto toilet swap with new supply lines and a wax ring is a small job. A full Toto-fitted remodel with a Neorest, a new vanity, and tile floor is at the top of the range. Every quote is line-item, so parts, labor, and disposal are separate and you’re paying for what you’d expect to pay for.
Every project gets a written price before work starts. That’s the Garrison Standard. Once the job is done, the 365-Day Done Right Promise covers the whole install for a full year. If a fill valve fails in month three, or a seal we installed leaks, we return and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Pull the tank lid and read the model number. Look for standing water on the floor. Listen for the fill valve running after the flush finishes. If a flapper is visibly warped or crumbling, that’s your culprit, and replacing it is a small job most people can manage.
Where DIY goes wrong: the fill valve adjustment, the wax ring reseat, and the supply line connection. We’ve seen a homeowner crack a Toto tank tightening a fill valve the wrong way, and we’ve seen a wax ring seated wrong leak into the subfloor for months before anyone noticed. Boulder City’s dry heat makes the seals dry and brittle, which makes a bad seat more likely, not less.
On washlet and Neorest components, stop. There’s water and electricity in the same seat. A licensed contractor should handle it, period. Call (844) 797-9259, and we’ll walk you through whether it’s a parts job or a full fixture replacement.
FAQs

How long does a Toto toilet or washlet last in Boulder City? A well-installed Toto toilet lasts 20 years or more, but the internal wear parts – fill valve, flapper, supply line – typically need replacing every 5 to 7 years, sometimes sooner in hard water. In Boulder City, we see them fail earlier because mineral scale accelerates wear on the seals. If yours is past that window, it’s worth a check. Call (844) 797-9259 for a written quote.
Can it be repaired instead of replaced? In most cases, yes. A fill valve, flapper, or supply line replacement is far cheaper than a new toilet, and fixing the wear part is the right call on a unit that’s otherwise solid. A cracked tank, a Neorest with failed electronics, or a bowl that’s been leaking into the subfloor is a replacement, not a repair. We’ll tell you which camp yours is in before any work starts, and the price is written down.
How long does the swap take? A standard fill valve and flapper replacement is a short visit, typically same day if it’s a straightforward part match on your Toto model. A supply line and wax ring swap runs a bit longer. A washlet or Neorest electrical component can take a scheduled appointment to source the right assembly. The hard limit is parts availability, not labor. That’s why we confirm the exact model number first.
How do you source the part? We order to your model number, OEM wherever the part is proprietary, and quality aftermarket only where it’s a clean match and it makes sense. We don’t claim to stock parts or carry them on a truck – every part is sourced to your specific fixture. That keeps the pricing honest and the fit right. Materials come from documented brands we trust, and we work with KraftMaid, Cambria, and Silestone for the broader remodel – so everything in the room is traceable to a spec sheet and a warranty.
If you’re in Boulder City and you’ve got a Toto that’s acting up, or a bathroom that needs more than a part swap, call (844) 797-9259 for a free estimate. A live person answers, day or night. We’ll give you a written price before a single tool comes out, and you’ll have the signed guarantee in hand when we close the door behind us. That’s squared away.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












