







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Roofing: The Boulder City Owner’s Guide
We install and repair Schluter roofing assemblies in Boulder City, and most of that work runs $400 – $1,800 for a targeted repair or $8,000 – $20,000 for a full replacement when the system is past saving. Schluter is a waterproofing and tile-underlayment system, not a shingle brand, so “replacement” usually means replacing the membrane, drainage mat, or edge profile the roof depends on, not the whole roof. We schedule free estimates on your timeline rather than promising same-day dispatch for planned work.
Owners usually find us after a ceiling stain appears weeks after a hard monsoon, or after a tile setter pulls up a section of roof and finds the Schluter mat beneath it cracked and chalky. Boulder City’s swing from 100°F summers to near-freezing winter nights is hard on cement-based thin-set and the flexible mat it bonds to. The failure is rarely sudden. It shows up slowly, as a soft spot, a loose tile, or a drip that only appears after wind-driven rain.
Key Takeaways
- Schluter is a waterproofing and tile system, not a roofing brand; the part that fails is usually the membrane, mat, or profile.
- Typical Boulder City repair runs $400 – $1,800; full system replacement $8,000 – $20,000.
- We price the whole job in writing before work starts and back completed work with the 365-Day Done Right Promise.
Which Schluter Models This Applies To

Schluter’s roof-side products carry model and series names you can read off the material itself, and matching the right one matters because a substitute with the wrong thickness or profile will not drain or bond the same way. The common roof-related lines we work with include KERDI and KERDI-BAND waterproofing membrane, DITRA and DITRA-HEAT uncoupling mat where it sits under tile on a roof deck or terrace, SCHIENE, QUADEC, and JOLLY edge profiles, and KERDI-LINE or KERDI-DRAIN assemblies on flat and low-slope roofs that use a drain. Series and thickness matter: DITRA comes in several thicknesses keyed to tile size and load, and putting a thinner mat under a heavy paver or thick stone tile can cause bond failure within a season.
To identify what you have, read the printed text on the mat or membrane edge, which lists the product name and a batch code, and measure the mat thickness with calipers if you can. A batch code also lets a supplier match specifications. On the OEM-versus-aftermarket question specific to Schluter: there is no legitimate “generic Schluter.” The profiles and mat systems are proprietary, and a look-alike membrane from another maker will not carry the same drainage geometry. We source genuine Schluter components through distributors and match the batch where possible. We’re an independent service provider and are not affiliated with Schluter Systems; we install and repair what the manufacturer specs, using their published data.
We also install and repair systems built around KraftMaid, Cambria, and Silestone when a tile terrace ties into a remodel, so the finish work and the waterproofing stay in one scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Roofing Is Failing
- Interior ceiling stains after wind-driven rain. Water is getting past the membrane or a seal at an edge profile. A vertical rain rarely finds the gap; a monsoon gust does, which is why it shows up suddenly.
- Loose or hollow-sounding tiles on the deck. The thin-set has debonded from the mat, often from thermal movement. Tap lightly and listen for the hollow note.
- Visible cracks or chalky white edges on the membrane. UV exposure and the desert freeze-thaw cycle break down cement and flexible layers over time. If the mat feels brittle instead of pliable, it has aged out.
- Ponding water or slow drainage on a flat or low-slope roof. A clogged or mis-sloped KERDI-LINE or KERDI-DRAIN assembly lets water stand, and standing water finds every seam.
- Cracked or lifting edge profiles. Profiles like SCHIENE and QUADEC take the impact of foot traffic and wind-driven grit. When the profile lifts, the membrane edge behind it is exposed.
Any one of these is worth a look. Two together usually mean water has been moving through the assembly for a while.
Replacement Cost & What’s Included

In Boulder City, a targeted Schluter roofing repair runs $400 – $1,800, and a full system replacement runs $8,000 – $20,000. Tile roof repair in the same market runs $600 – $2,500, and a full roof replacement $8,000 – $20,000, so these numbers line up with what the local market charges.
The range depends on the square footage, the specific product, how much of the assembly has to come up, and whether a drain or edge detail is involved. Small, flat-roof repairs sit at the low end; tearing out a terrace deck and re-waterproofing under it sits at the high end. You get a written, line-item price before any work starts that separates parts from labor, and it does not move at the door. Every completed job is covered by the 365-Day Done Right Promise: if the repair or replacement fails within that year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Read the product name on the mat edge, note which tiles sound hollow, look for standing water or slow drains after a storm, and photograph any interior stain with a date. What you should not do is part of the reason we’re writing this plainly: pulling up bonded tile and membrane on a roof deck, especially on a slope, is high-risk work. A slip on a pitched roof, or cutting into a waterproofing layer you can’t fully see, turns a $400 repair into a much bigger bill, and you lose the drain the assembly was designed around. The cut-in and re-bond also has to be done to the manufacturer’s spec or the new layer fails at the same seam.
Call us at (844) 797-9259 for a free estimate. A live person answers, day or night, and you’ll get a straight written number before any tools come out.
FAQs

A properly installed Schluter assembly typically gives 15 to 25 years in this climate, less on a flat roof with heavy sun exposure and standing water. The desert UV and the freeze-thaw swing are the two forces that shorten it, so drainage and edge profiles need checking, not the whole system. Call (844) 797-9259 for an honest read on what you have.
Often yes. A localized membrane or profile failure can usually be repaired for $400 – $1,800 rather than replaced for $8,000 – $20,000. We repair when the mat and substrate are still sound and replace when the whole assembly has aged out. Call (844) 797-9259 and we’ll tell you which, with the reason in writing.
A targeted repair is often a one-day job; a full system replacement on a terrace or flat roof takes several days depending on square footage and how much has to come up. We put the schedule in writing with the price before work starts. Call (844) 797-9259 to get that estimate on your timeline.
We order genuine Schluter components through distributors and match the batch code and thickness to what’s already on your roof where possible, so the new material bonds and drains the same way. We’re an independent contractor and not affiliated with Schluter Systems. Call (844) 797-9259 to schedule a free estimate.
Get a Written Price Before Any Work Starts
If a stain, a loose tile, or a slow drain has you looking at your roof, we’ll tell you what’s failing, what it takes to fix it right, and what it costs, all in writing. Bradford Remodeling Boulder City is part of the Garrison Partners family and held to The Garrison Standard, which means a documented scope, a clean site at close, and the 365-Day Done Right Promise in your hand. Our technicians have up to 22 years of experience, and our crews are background-checked and uniformed so you know who’s coming. Call (844) 797-9259 to schedule your free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












