







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Driveway & Pavers: The Boulder City Owner’s Guide
We install Schluter-compatible driveway and paver systems in Boulder City, with paver driveway installation running $7,000 – $18,000 and paver patio installation $3,500 – $11,000 for a typical residential job. Most of that work can be scheduled within a normal project window, and every price is written before a single tool comes out. Bradford Remodeling is an independent service provider and is not affiliated with Schluter.
Owners usually discover a problem the same way: a paver edge that’s started to heave after a monsoon, a grout or joint line cracking along the driveway apron, or water pooling against the garage slab instead of running off. Schluter’s system parts (edge profiles, drainage matting, movement joints) fail quietly at first, then all at once when the next hard rain arrives. This guide is written for the Boulder City homeowner who already knows the part and wants it matched, priced, and installed correctly.
Which Schluter Models This Applies To

Schluter’s exterior and paver line covers several distinct families, and the part you need depends on where it sits in the assembly. The common ones we see in Boulder City driveways and patios:
- Schluter-TROBA drainage matting, used under permeable paver systems and terrace assemblies to move water down and out.
- Schluter-DITRA-DRAIN drainage and uncoupling membrane, for bonded assemblies where water needs a path to the edge.
- Schluter-RONDEC, QUADEC, and JOLLY edge profiles, which trim and protect paver and slab edges and take the most physical abuse.
- Schluter-DILEX movement joints, which absorb the expansion that Boulder City’s temperature swings drive into every hard surface.
Identification matters more than brand loyalty here. Measure the profile height (the standard range runs roughly 3/8 in. to 9/16 in., and the profile must match your paver or tile thickness exactly), read the printing on the matting or membrane roll if it’s still visible, and note the edge type. A 3/8 in. profile on a half-inch paver leaves a lip that catches tires and shovels. On OEM versus aftermarket: Schluter’s own profiles are the safe choice where a warranty hangs on the assembly, but quality equivalents in the same height and stainless grade perform fine on a repair, and we’ll tell you honestly which is worth the money for your specific spot. We don’t stock parts and don’t carry them on a truck – we source the correct part for your assembly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Driveway & Pavers Is Failing
These are the symptoms that actually show up on Boulder City properties, and what’s behind each one.
- Water pooling at the driveway apron or patio edge. The drainage matting is clogged, crushed, or was never lapped correctly, so water sits instead of draining away from the slab.
- Paver edges lifting or rocking after a storm. A failed edge profile or a missing movement joint lets the pavers migrate; once one lifts, the ones next to it follow.
- Hairline cracks opening along joint lines. Rigid grout or mortar where a DILEX movement joint belonged. Boulder City swings from summer highs near 105°F to winter nights that dip toward freezing, and hard surfaces need somewhere to move.
- White efflorescence or staining on the pavers. Moisture trapped under the assembly because the drainage layer isn’t doing its job.
- A profile that’s loose, bent, or pulling off the edge. Fasteners have backed out or the adhesive failed; a loose stainless profile becomes a trip and tire hazard before it becomes a water problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work actually runs in Boulder City, parts and labor together:
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation (full assembly) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement (tear-out and rebuild) | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway sealing (protective, not structural) | $250 – $700 |
The range is driven by square footage, how much of the existing assembly has to come up, the paver you choose, and how many movement joints and drainage runs the site needs. A single failed edge profile is a small repair; a drainage layer that was installed wrong from the start is a rebuild of that section. Every Bradford project gets a written price before work begins – no numbers that move once the crew is on site – and the work is covered by the 365-Day Done Right Promise. If the repair or install fails inside that first year, we come back and correct it at no charge.
DIY or Call Us?
Here’s the honest split. You can safely check the obvious things yourself: inspect the edge profiles for looseness, note where water pools after rain, look for cracked joint lines, and photograph the matting or membrane if it’s exposed. That information helps us quote accurately.
Where DIY goes wrong is below the surface – lifting pavers to reset a drainage layer, cutting and fitting a movement joint at the correct width, or re-bonding an edge profile so it holds under a vehicle. Do it wrong and the whole section fails again within a season, and you’ve spent the money twice. We use trade terms like substrate (the compacted base the pavers rest on) because that’s usually where the actual failure lives, not in the paver itself. If the symptom keeps coming back after a patch, it’s time to have it looked at. Every repair comes with a written price up front and our background-checked, uniformed technicians on the job. Call (844) 797-9259 for a free estimate.
FAQs

A correctly installed assembly typically lasts 15 to 25 years; the mat’s lifespan is really the lifespan of the drainage path, and Boulder City’s dust and monsoon runoff mean it needs occasional clearing to actually reach that number. Call (844) 797-9259 for an exact assessment – estimates are free.
Often yes. A single failed edge profile or a localized joint can be repaired without tearing up the whole driveway. But if the drainage layer is crushed or the substrate has failed, a patch won’t hold and replacement of that section is the honest call. Call (844) 797-9259 and we’ll tell you which one you’re looking at.
A localized profile or joint replacement is usually a single-day job. A section rebuild that involves lifting pavers, resetting substrate, and re-laying drainage takes two to four days depending on square footage. Your written scope spells out the schedule before work starts.
We identify your assembly from measurements, exposed labels, and the profile height, then order the matching Schluter or quality equivalent part. We don’t claim parts on a truck; we source the right one and tell you the lead time up front. Call (844) 797-9259 for a free estimate.
Bradford Remodeling Boulder City handles Schluter-compatible driveway and paver work across Boulder City, backed by The Garrison Standard: a written price before any work begins, background-checked uniformed technicians, a live person answering the phone 24/7, and the 365-Day Done Right Promise on every completed job. We also work with name-brand materials like KraftMaid, Cambria, and Silestone on the rest of your project. Call (844) 797-9259 to schedule your free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












