A Bradford company - serving Boulder City, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Boulder City

Schluter Home Additions & ADU in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Home Additions & ADU: The Boulder City Owner’s Guide

We install Schluter-compatible home additions and ADUs in Boulder City, and a typical build runs $45,000 – $130,000 depending on footprint, site work, and finish level. ADU construction is the higher end of that, $90,000 – $220,000, and garage conversions land between $30,000 and $80,000. This page is for the homeowner who already knows the waterproofing and uncoupling side of the assembly matters and wants straight answers on which Schluter components fit, what fails first, and what the fix costs. Most Boulder City owners find the problem the same way: a tile floor in the new room that sounds hollow, a grout line that keeps reopening, or a shower curb that wicks moisture long after the finish went in.

Call (844) 797-9259

Key takeaways

  • Schluter builds several distinct systems, and the right part depends on which assembly your addition used.
  • Boulder City’s desert swing – hot days, cold nights, and very low humidity – stresses a poorly installed membrane faster than most owners expect.
  • We’re an independent service provider. We are not Schluter and we don’t speak for them.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter isn’t one product; it’s a family of assemblies, and “the part” changes with each. The common ones in an addition or ADU are DITRA and DITRA-HEAT uncoupling membranes under tile, KERDI and KERDI-BAND for waterproofing shower and wet areas, KERDI-BOARD as a backer panel, and SCHIENE, DILEX, and TREP-E as edge and movement profiles. If your layout includes heated tile, you’re likely on a DITRA-HEAT system with a specific thermostat and cable spec.

To match the right part, read the imprint stamped on the membrane or profile, not the box the installer threw out. DITRA and DITRA-HEAT are printed along the roll with the series name and the square grid that sets the fleece side up. Roll width and grid count are your first I.D.; profiles have a shape code on the leg. That matters because OEM Schluter parts are dimensionally matched to the system, while a generic uncoupling mat or edge strip can be a millimeter off and still “fit” until it doesn’t. We order OEM when the assembly’s warranty depends on it and quality aftermarket only where the profile doesn’t control the waterproofing.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Home Additions & ADU Is Failing

  • Hollow tile and drifting grout. There’s no uncoupling layer doing its job, so seasonal movement in the slab or subfloor transfers straight into the tile. You’ll hear it first, then see hairline grout cracking at the room edges.
  • Recurring moisture at a shower curb or niche. A KERDI band or corner that wasn’t overlapped to spec lets water behind the membrane. It shows up as darkened grout, a soft curb, or efflorescence long after the finish looked fine.
  • Lifted or popped edge profiles. A SCHIENE or DILEX strip set without the correct thin-set bed pulls loose at the threshold. It’s the first piece to fail because it takes the traffic and the thermal swing at a doorway.
  • Cold or dead zones in heated tile. A DITRA-HEAT cable that was nicked or a thermostat wired to the wrong sensor leaves half the floor unresponsive. It reads as a part failure, but the fault is usually at the splice or the sensor.
  • Cracks tracing the floor grid. When joints open along the familiar grid lines, the substrate has moved and the membrane wasn’t controlling it. This is the classic sign the assembly was specified wrong for the addition’s foundation.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A galley kitchen opened up to the dining room with a new peninsula

Straight numbers for Boulder City, installed. These cover materials plus labor, the membrane or profile, substrate prep, and re-setting the finish over the repair.

Scope Installed range
Full home addition $45,000 – $130,000
ADU construction $90,000 – $220,000
Garage conversion $30,000 – $80,000

The range is driven by square footage, foundation type, whether plumbing and electrical rough-in move, and how much finished surface has to come up to reach the failed layer. We give a written price before any work starts, so the number you hear is the number you get. Every finished project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge.

DIY or Call Us?

You can safely read the membrane imprint, photograph the failed area, and check the thermostat and breaker on a heated floor. That’s diagnosis, and it helps. Where it goes wrong is the repair itself. Waterproofing is a continuous-system job: one under-lapped KERDI band or one profile set without the right bed and the leak returns in a season, behind new tile that has to come back out. On a slab in Boulder City, the thermal movement that cracked the first install will crack a second if the uncoupling layer is skipped. Setting waterproofing and uncoupling correctly is trained work, and we’d rather you not pay twice. Call (844) 797-9259 and we’ll price the fix in writing.

FAQs

A remodeled family room with new windows and a window seat

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing rooflineA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled primary suite with built-in wardrobes and a window seat

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch