







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Kitchen Remodeling: The Boulder City Owner’s Guide
Sterling-compatible kitchen remodeling in Boulder City typically runs $14,000 – $45,000 for a full kitchen, or $9,000 – $20,000 for a small kitchen when the layout stays put. We install Sterling-cabinet-ready kitchens and we handle the parts that fail first: hinges, drawer glides, and cabinet boxes that have gone soft. Most owners find us after a hinge snaps or a drawer glide quits, and the cabinet itself is still perfectly good. That’s the moment this page is built for.
Boulder City’s dry desert air and summer heat cycling do a number on anything mechanical. We see it constantly: hinges that open and close hundreds of times in a warm kitchen wear faster than the cabinets they’re bolted to. Before you replace a whole run of cabinetry, get the part matched and priced. Call (844) 797-9259 for a free estimate.
Key Takeaways
- Sterling-compatible kitchen remodeling for a Boulder City home runs $14,000 – $45,000; a small kitchen runs $9,000 – $20,000.
- Cabinet installation alone is $4,000 – $13,000; countertop installation $2,000 – $6,500.
- Most “failed” Sterling cabinets need hardware, not a new cabinet box.
- Every completed project carries the 365-Day Done Right Promise in writing.
- We’re an independent contractor, not affiliated with Sterling.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which Sterling Models This Applies To
Sterling has sold cabinets and storage lines across a wide range of series over the decades, and hardware specs changed between them. That’s the compatibility gotcha most people miss: the same-looking hinge will have a different overlay and mounting pattern depending on which series your cabinet came from. A door that’s 3/4-inch overlay uses different hardware than a full-overlay door, even if the hinge plate looks identical at a glance. Order the wrong one and it won’t close true.
To identify what you actually have, look in three places. First, check inside the cabinet door or on the back panel for a manufacturer label with the series name or model number. Second, measure the door overlay – the amount of door that covers the face frame – because that number drives hinge selection more than anything else. Third, measure the cabinet box depth and width. Sterling’s common base cabinets run 24 inches deep and 34.5 inches tall, but confirm yours; odd dimensions exist. Match your measurement to the part’s spec sheet, not just a photo.
On OEM versus aftermarket for Sterling specifically: the OEM hinge is the safest match when you can still source it. When OEM is discontinued, a quality aftermarket equivalent from a known hardware maker is a legitimate route, and we install against the manufacturer’s specs so the spec is documented. For cabinets and surfaces we install KraftMaid, Wellborn, Cambria, and Silestone – all with manufacturer specs and warranties that back our own guarantee. We don’t carry parts and we don’t keep a parts stock; we source what matches your model and install it correctly. We’re an independent contractor, not affiliated with Sterling.
Signs Your Sterling Kitchen Remodeling Is Failing

Owners usually discover a failing part in one of five ways, and each one points at a specific cause:
- The door sags and drags on the face frame. That’s a hinge that’s lost tension or pulled its screws from the wood. The hinge is the wear point, not the door.
- A drawer won’t glide and jams halfway. The glide track has worn or the drawer bottom has warped from moisture – the glide usually dies first.
- The cabinet box is soft or swollen near the base. Heat and dry air won’t do this; water will. A slow leak or a past spill softened the particleboard, and hardware won’t hold in soft substrate.
- Hinges are rusting or stiff. In Boulder City’s climate, kitchens near a humidifier, sink, or dishwasher can hold enough moisture to pit the hinge metal over time.
- Doors won’t sit even across a run. This usually means the cabinet boxes have shifted out of level, not that the doors are bad. Out-of-level boxes cause uneven gaps that no hinge adjustment fixes.
For each of these, the honest test is whether the cabinet box is solid. If it is, you likely need hardware. If it isn’t, that’s a cabinet replacement conversation, and we’ll tell you which one it is before any work is priced.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the installed pricing for Boulder City, using our fixed market ranges:
| Scope of work | Installed price range |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: the size of the kitchen, how many cabinet boxes need replacing versus reusing, the surface material you choose, and whether boxes need to be leveled or re-mounted. Every price is written down before a single tool comes out – no numbers that move at the door. You get a written line-item quote showing parts and labor separately. Every completed project carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge. Call (844) 797-9259 for a free estimate.
DIY or Call Us?
What you can safely check yourself: measure the door overlay, note the cabinet dimensions, check for a series label inside the door, and tighten a hinge screw that has backed out. That’s all safe to do and tells us a lot. Where DIY goes wrong: fitting a new hinge to an existing bored door, or a countertop or island that has to be shimmed and set level. Get that wrong and you’re out the part cost and still calling us. And here’s the one to be plain about – if a cabinet or island is coming off the wall to service it, stop. Cabinets carry real weight, and pulling one off a wall is a two-person, properly anchored job, not a solo afternoon project. We’re the disciplined crew for the parts you shouldn’t handle alone. Call (844) 797-9259 and we’ll give you a written price before work starts.
FAQs
Eight to fifteen years is typical for a moving hinge or drawer glide in a Boulder City home, and the dry desert swing shortens the upper end. The cabinet box itself usually outlives the hardware several times over – which is why matching the part matters more than replacing the cabinet. If your hardware is near or past that window, it’s worth having it checked before a failure catches you mid-cook. Call (844) 797-9259 for a free estimate.
Often, yes. A hinge that pulled its screws can be re-anchored with a proper fix if the substrate is still solid; a glide can sometimes be cleaned and re-tracked. If the wood has softened or the hinge bore is stripped, replacement is the honest answer, and we’ll say so plainly. The test is always the condition of what the hardware attaches to. Call (844) 797-9259 and we can tell you which it is.
A single hinge or glide swap is a short job – usually an hour or two once the exact part is matched and on site. A cabinet or countertop replacement is a planned job, so expect a real schedule, not a same-day promise. We write the timeline into the price before work starts so nothing surprises you at the end. Call (844) 797-9259 to schedule your free estimate.
We match by model and measurement, not by picture – we confirm the series label and door overlay, then source the OEM part or a specification-matched aftermarket equivalent. We don’t carry a parts stock and we don’t stock parts on trucks; we find the part that fits your specific Sterling cabinet. When the OEM is discontinued, the aftermarket spec is documented so the match is traceable. Call (844) 797-9259 for an exact quote – estimates are free.
And if the kitchen is past the point of hardware, we handle full kitchen and countertop work across Boulder City with a written price and the 365-Day Done Right Promise behind every job. Call us at (844) 797-9259 to schedule your free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












