







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The Boulder City Owner’s Guide
We install IKO-compatible windows and doors throughout Boulder City, and whole-unit replacement runs $4,500 to $15,000 for standard windows and $8,000 to $25,000 for impact-rated units, with most single openings falling between $600 and $1,800 installed. Yes, it’s usually a one-day swap per opening once the unit is matched to your IKO series.
Owners in Boulder City usually don’t wake up thinking about window hardware. They notice it another way: a door that won’t latch when the afternoon sun hits, a window pane that fogs between the glass in July, or a patio slider that suddenly takes two hands and a shoulder to close. That fogging, dragging, or latching problem is your first signal that a component inside the IKO unit has failed long before the glass itself did.
Which IKO Models This Applies To

IKO builds a wide range of vinyl and hybrid window and door lines, and the part you need depends entirely on which series is in your wall. The model and series code is etched on the glass edge or printed on a label tucked in the head jamb – pull the top of a sash or the door panel and you’ll usually find it. Copy that code exactly. Boulder City has a mix of homes from the 1970s through recent builds, and the hardware, balances, and weather seals changed across those decades even within one product family.
Here’s the compatibility catch most homeowners miss: a replacement sash balance or roller assembly from a newer IKO series will physically fit the older track but won’t carry the same sash weight, so the window sags within a season. Length alone doesn’t tell you whether a balance is the right one – the tension rating stamped on the old part does. When we source a part for a Boulder City job, we match the model code, the balance tension rating, and the frame profile, not just the measurement. We work with IKO’s documented part specifications and with quality aftermarket equivalents where the OEM part is discontinued, and we tell you which one you’re getting and why. Bradford Remodeling is an independent contractor and is not affiliated with IKO.
The OEM-versus-aftermarket call comes down to one question: is the original part still made? If it is, we use it. If it isn’t, we match a tested equivalent to the same tension and profile spec rather than forcing a part that “looks close.” We handle KraftMaid, Cambria, and Silestone work too, but on windows and doors the spec is what protects your warranty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Windows & Doors Is Failing
Window and door failures in Boulder City show up in patterns. Here are the five we see most, with the cause behind each.
- Fogging or condensation between the panes. The factory seal on the insulated glass unit has failed, letting moist air between the layers. It won’t clear with a wipe because the moisture is trapped inside.
- A sash that won’t stay up, or slams down. The balance – the spring mechanism that carries the sash weight – has lost tension or broken. This is the single most common IKO part failure on double-hung units, and it’s a balance rating problem, not a cleaning problem.
- A door that drags or won’t latch in hot weather. Thermal expansion, combined with worn hinges or a sagging roller assembly, throws the door out of square against the strike plate. It gets worse as the summer wears on.
- Drafts, whistling, or dust at the edges. The weatherstripping or sweep has hardened and flattened under the desert sun. Once the seal loses its memory, air moves freely around the sash or door panel.
- Water staining on the interior sill. A failed seal or a clogged weep channel lets rain into the frame, not past it. In Boulder City’s occasional hard monsoon pushes, this shows up fast.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Window replacement in Boulder City runs $4,500 to $15,000 for a typical whole-home set, with individual openings at $600 to $1,800 each installed. Impact-rated units push the range to $8,000 to $25,000. A single hardware part – a balance, a roller, a sweep – is a repair, not a replacement, and is priced far lower than a full unit.
What drives your number: the IKO series, the glass package, whether it’s a standard window or a full patio door, and how many openings you’re doing at once. More openings in one visit means a lower per-unit price because the setup cost is shared.
- Hardware repair (balance, roller, sweep): priced per part at the time of quote
- Single window replacement: $600 – $1,800 installed
- Whole-home window replacement: $4,500 – $15,000
- Impact-rated window replacement: $8,000 – $25,000
Every job gets a written price before any work starts, every time, with no numbers that move at the door. Parts and labor are listed line by line. All completed work is covered by the 365-Day Done Right Promise: if the repair or install fails within the year, we come back and correct it at no charge.
DIY or Call Us?
Some checks are safe and smart to do yourself. You can identify your IKO model code, measure the opening, check whether a sash balance is visibly snapped, and test a door latch by watching the strike plate as it closes. Write down what you find before you call anyone.
Where homeowners get into trouble: forcing a balance out of a pressurized channel or prying a sash frame apart to reach the glass seal. A window sash carries real weight, and a failed balance can drop it without warning, which is a hand and finger injury waiting to happen. Glass handling is the other risk – a pane that slips has no second chance. Checking is fine. Swapping the part on a loaded sash or an insulated glass unit is a job for someone who has done it. If you’re unsure what failed, call us at (844) 797-9259 and we’ll talk through whether it’s a repair or a replacement before you spend a dollar.
FAQs

Quality IKO vinyl windows typically give 20 to 30 years, but the hardware and seals inside them wear faster in Southern Nevada. Balances, weatherstripping, and glass seals commonly need attention in year 10 to 15 because Boulder City’s UV load and dry heat age rubber and spring steel ahead of the frame itself. Call (844) 797-9259 for an exact quote – estimates are free.
Often, yes. A broken balance, a worn roller, or a flattened sweep can be replaced as a repair, which costs a fraction of a new unit. If the insulated glass seal has failed and the unit is fogged, glass replacement or a full unit is usually the honest answer. We tell you which you need, in writing, before any work starts.
A hardware or balance repair is typically done in about an hour per opening, and a single window or door replacement is usually a one-day job once the unit is on site. Whole-home sets take two to three days depending on window count and access. We confirm the schedule in writing before we begin.
We match against your model code, the balance tension rating, and the frame profile, and we use OEM or tested aftermarket equivalents depending on what’s still made. We tell you which part you’re getting and why. Bradford Remodeling is an independent contractor, not affiliated with IKO, so we source the correct spec rather than assuming one part fits every series.
If you’re not sure whether you’re looking at a repair or a replacement, call (844) 797-9259 for a free estimate. A live person answers 24 hours a day, seven days a week – no voicemail, no callback queue. We’ll identify your IKO model, put a written price in front of you before any work starts, and stand behind it with the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












