







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Roofing: The Boulder City Owner’s Guide
CGI-compatible roofing repair in Boulder City typically runs $400 – $1,800, and a full roof replacement runs $8,000 – $20,000 depending on pitch, square footage, and whether the original layers come off. We source the correct CGI-spec shingle or component for your model, give you a written price before work starts, and back the finished roof with our 365-Day Done Right Promise. Most owners discover a problem the same way: a brown water ring spreads across a ceiling the week after a monsoon, a shingle tab shows up in the gravel on the side yard, or a roofer hired to fix one leak points at the rest of the deck and starts adding numbers.
Key takeaways
- CGI installs roofing under several product lines; matching your model and profile matters more than brand name alone.
- Repair pricing in Boulder City: $400 – $1,800. Full replacement: $8,000 – $20,000.
- We work with GAF, CertainTeed, and Owens Corning roofing products, or match your existing CGI line when the rest of the roof is sound.
Which CGI Models This Applies To

CGI products turn up on Boulder City homes across a wide range of model and series designations, and the exact part number matters when a repair needs to match an existing run of shingles. Before we order anything, we climb the roof and read the data. Roofing labels don’t always survive ten years of desert sun, so we also measure shingle exposure (the visible height of each course), check the profile pattern, and note the color lot if the packaging is still stapled inside the attic near the ridge.
The compatibility gotcha that trips up most homeowners: CGI replaced or updated several shingle profiles over the years, and a part that carries the same name as yours may not have the same tab dimensions or nail-zone placement. Slipping a slightly different profile next to the old field is how you get a visible seam, wind uplift at the edge, and a new leak twelve months later. When the match isn’t exact, we tell you up front and price both options: match close and hope, or replace the affected slope as a single plane so the whole section ages together.
On the OEM-versus-aftermarket decision for CGI specifically, quality aftermarket shingles from GAF, CertainTeed, or Owens Corning are a reasonable substitute when the manufacturer’s warranty on your existing roof is already expired, and most are. When the warranty is still live, an OEM-compatible part protects the claim. Either way, we name the product, the specified brand, and the warranty terms in the written price. We’re an independent service provider and not affiliated with CGI; we source the correct part for your roof, not just the closest thing on a shelf. We also install KraftMaid, Cambria, and Silestone products on the interior side of the same homes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Roofing Is Failing
The desert is hard on a roof in ways a lot of homeowners don’t expect until something fails. Here are the five symptoms we see most often on CGI-roofed homes around Boulder City.
- Granule loss in the gutter and downspout. Look for black grit at the bottom of the gutter or in the splash zone at grade. That grit is the shingle’s protective surface, and once it’s gone, the asphalt underneath bakes and cracks in the summer sun.
- Curling or clawing tabs. Tabs that lift at the edges or cup upward are usually a sign of thermal cycling, the daily swing from hot afternoon to cool night. Boulder City gets that swing year-round, and it ages shingles faster than a steady climate would.
- Water stains on the ceiling or in the attic sheathing. A brown ring on the drywall is the leak showing up after it has already been running for a while. The actual breach is usually at a flashing, a valley, or a nail pop, not directly above the stain.
- Lifted or failed flashing at chimneys, vents, and skylights. Flashing seals are where most leaks start, especially after a wind event. If you see cracked sealant or a flashing edge pulling away, water is getting behind it.
- Sagging along the roof deck or a soft spot underfoot. A dip in the roofline can mean wet sheathing underneath. That’s the one symptom that should not wait, because a soft deck is a structural problem, not a surface one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are installed prices for CGI-compatible roofing work in Boulder City. These are ranges we hold to once the written price is signed.
| Scope | Installed price range |
|---|---|
| Roof repair (patch, flashing, localized shingle replacement) | $400 – $1,800 |
| Roof replacement (full tear-off and re-roof) | $8,000 – $20,000 |
| Tile roof repair | $600 – $2,500 |
| Metal roof installation | $15,000 – $40,000 |
What drives the range: square footage, roof pitch (steeper costs more in labor and safety), how many layers come off, and whether the deck underneath is sound. A repair lands on the low end when it’s a flashing reseal and stays there when the deck is dry. A full replacement with new underlayment, fresh flashing, and a ridge vent upgrade sits higher.
You get parts and labor on one written line-item price before any work begins, so there are no numbers that move at the door. The finished roof is covered by our 365-Day Done Right Promise: if it fails within the year, we come back and correct it at no charge. We also offer GAF, CertainTeed, and Owens Corning roofing products as part of our documented brand roster.
DIY or Call Us?
Here’s the honest split. An owner can safely walk the yard after a storm, check the gutters for granule loss, look at the ceiling inside for stains, and walk the attic with a flashlight to spot daylight coming through the deck. That much is useful information to have before you call. What you shouldn’t do is get up on the roof to pull shingles, chase a leak source, or reseal around a flashing you can’t fully inspect.
Roof work is fall-risk work. Combine height with a 10/12 pitch and dry desert heat, and a homeowner on that roof is one slip away from a serious injury. Even on a flatter roof, a DIY patch on CGI-profile shingles often misses the true source of the leak, and the water keeps running behind the repair for another season. We send background-checked, uniformed technicians, and they inspect the full roof, not just the spot you pointed at: no half-patch that leaves the other slope a season away from the same failure. Call (844) 797-9259 to schedule a free estimate, and you’ll get a written price before we touch a shingle.
FAQs

A properly installed CGI-compatible asphalt shingle roof typically lasts 15 to 22 years in this climate, with the lower end in full Southern Nevada sun exposure and the upper end on shaded or lower-pitch sections. Boulder City’s intense UV and daily heat swing shorten shingle life compared to cooler regions, which is why granule loss shows up earlier than the manufacturer’s rated lifespan suggests. Call (844) 797-9259 for a roof inspection and an exact assessment of what your roof has left.
Often, yes. Localized leaks at flashings, valleys, and vent penetrations are routinely repaired for $400 – $1,800 and hold for years. The cases that call for a full replacement are widespread granule loss, curling across more than a slope’s worth of the field, or a soft deck underneath. We’ll tell you which one you have on the first visit, with no upsell, and price the repair in writing before work starts. Call (844) 797-9259 for a free estimate.
A targeted repair is usually a half-day to a full day. A full CGI-compatible roof replacement on a typical Boulder City home takes two to four working days, depending on square footage, roof complexity, and weather. We schedule the work, confirm access and parking with you beforehand, and put a written completion window in the price. Call (844) 797-9259 to schedule your free estimate.
We match your existing CGI line by reading the rooftop label when it survives, measuring shingle exposure and profile, and checking the attic for the original packaging. If the exact profile is discontinued, we source the closest quality-compatible shingle from GAF, CertainTeed, or Owens Corning, or quote a full-slope replacement when a near-match would show a seam. You see the specified product in the written price before we order anything. Call (844) 797-9259 for a free estimate.
Bradford Remodeling Boulder City gives you a written price before any work starts and covers the finished roof under the 365-Day Done Right Promise. A live person answers the phone around the clock, and our technicians have up to 22 years of experience. Call (844) 797-9259 to schedule your free estimate on CGI-compatible roofing for your Boulder City home.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












