







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Home Additions & ADU: The Boulder City Owner’s Guide
In Boulder City, a CGI home addition or ADU typically runs $45,000 – $130,000 installed, depending on size, site access, and whether the build is a stacked block addition or a detached accessory unit. Additions are planned work, not emergency work: we schedule the site visit, put a written price in your hand before anything starts, and build to a signed scope. You’ll know the number before tools come out, not after.
The failures we see on these builds rarely announce themselves at once. They show up as a floor inside the addition that sits a half-inch off the original house, cracks tracking up from a seam where the roofline ties in, or doors that stop latching after the first summer. Owners usually discover it in the first monsoon season or the first July, not on the final walkthrough.
Which CGI Models This Applies To

CGI builds additions and accessory units across stacked block and panel systems, so the exact part you’re chasing depends on the model line and the sub-assembly. Before we order anything, we pull the stamped model plate or the framing label from the structure – usually on an exterior beam end or the header at the tie-in wall – and match it against the manufacturer’s current part sheet. Old and new CGI series don’t always share fastener patterns or trim profiles, and that’s the first compatibility gotcha: a connector that looks identical on the shelf may be a different gauge or hole spacing than your series calls for.
Once we’ve got the model, you have a real decision: OEM part or a quality aftermarket equivalent. For structural connectors, flashings, and tie-in hardware, we go OEM or a manufacturer-listed equivalent, because those parts have published load ratings and warranties that back the build. For trim, soffit, and finish pieces, a matched aftermarket product is often fine and cheaper.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Home Additions & ADU Is Failing
- Floor or threshold mismatch at the tie-in. The addition floor settles a fraction off the original house – a sign the tie-in hardware wasn’t matched to your CGI series or the footing wasn’t set for Boulder City’s caliche and hardpan.
- Cracks tracking from the roofline seam. Moisture is getting into the flashing or the valley where the addition roof meets the house. Left alone, it works into the framing.
- Doors and windows that stop latching in summer. Thermal movement in an addition that wasn’t detailed for desert swing – 100°F-plus days and cool nights – can show up as binding frames.
- Stucco or siding pulling away at the joint. A tie-in detail that skipped a proper flashing or weep screed lets water behind the finish.
- Bowing or sagging in a beam end. That’s a structural connector problem, and it’s not something to watch and wait on. Call us and we’ll look at it.
Replacement Cost & What’s Included

For a Boulder City home addition, plan on $45,000 – $130,000 installed depending on square footage, foundation work, and how the roofline ties into the existing house. A detached ADU runs $90,000 – $220,000, and a garage conversion sits in the $30,000 – $80,000 range. What drives the range: footings into caliche, the tie-in detail, whether you’re matching an older material profile, and the finish level inside.
Our quote is a written price before any work starts, line-item by trade, so nothing moves at the door. Every completed addition carries the 365-Day Done Right Promise – a written, full-year guarantee; if the work fails inside that window, we come back and correct it at no charge. If you need a standalone repair on a failed connector or flashing, tell us on the call and we’ll give you the number before we book.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check some things yourself: walk the perimeter and photograph any crack or gap at the tie-in, note the model plate location, and look for water staining in the attic where the addition meets the house. That’s a useful starting record.
Where it goes wrong: anything involving structural connectors, footing, or the roof tie-in. On a stacked block addition, a failed tie-in or a beam connection isn’t a weekend fix, and getting the load path wrong is a genuine safety issue. Pulling a floor level or re-flashing a valley yourself usually turns one problem into two. If you’re seeing bowing, cracks widening, or water inside the wall, call us and let a trained crew look at it. That’s honest, not cautious.
FAQs

A properly built CGI addition should hold its tie-in and flashing for decades, but in Boulder City the desert swing is hard on the details – summer heat, cool nights, and monsoon rain test every joint. The real driver is whether the hardware was matched to your series and flashed correctly at the roofline. Call us for a site look if your addition is over a decade old and you’ve never had the flashing inspected.
Often yes. A failed flashing at the tie-in, or a single connector that’s loosened, is frequently a targeted repair, not a rebuild. The answer depends on whether the failure is isolated or the whole detail was set wrong the first time. We’ll tell you which on the site visit, and the estimate is free.
A single-part repair is usually a same-day or one-day job, once the right part is on site. A larger tie-in or flashing replacement runs several days depending on access and finish matching. Additions themselves are planned builds, scheduled out – no one builds an addition overnight. Call (844) 797-9259 and we’ll give you the timeframe for your job.
We start with your model plate and match it against the manufacturer’s current part sheet, then order OEM or a listed equivalent for structural pieces so the load rating and warranty are on record. We don’t claim to stock parts – we source the correct part for your specific series and document it in the written price. Call for an exact quote; estimates are free.
Get a Written Price on Your CGI Addition
If your CGI addition or ADU needs attention, we give you the real number before anything starts, and we back the work with the 365-Day Done Right Promise in writing. Bradford Remodeling Boulder City is an independent contractor, not affiliated with CGI. We work with a documented roster of name-brand materials – KraftMaid, Cambria, Silestone, Kohler, Moen, James Hardie, Therma-Tru, and more – so specifications are traceable and nothing’s left to guesswork. Call (844) 797-9259 for a free estimate and a written price.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












