A Bradford company - serving Boulder City, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
C
CWS · Boulder City

CWS Kitchen Remodeling in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
An open living space after a whole-home remodel
A finished backyard cottage with a small covered porch
A remodeled primary bathroom with a soaking tub and walk-in shower
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Kitchen Remodeling: The Boulder City Owner’s Guide

We install CWS-compatible kitchen remodeling in Boulder City for $14,000 to $45,000, with cabinet installation at $4,000 to $13,000, countertops at $2,000 to $6,500, and backsplash work at $800 to $2,500. Every project gets a written price before we touch a thing, and the finished work is covered by the 365-Day Done Right Promise. Most Boulder City owners call after a hinge fails or a cabinet door sags because the box pulled from the wall. Others notice the counter seam opening near the sink, or a drawer that suddenly catches on the frame every time they open it.

Call (844) 797-9259

Which CWS Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

CWS has built kitchen cabinetry and components for years, and the version that matters most is the model line stamped inside the cabinet door or on the back of the box panel. Look for a spec label or a wood-burned model number inside the uppermost cabinet. CWS box cabinets from the mid-2000s forward typically use 3/4-inch particleboard or plywood carcasses with metal drawer slides, while older models used stapled butt joints and plastic slides that crack at the screw tabs.

The specific gotcha: CWS standard base cabinets from roughly 2008 onward are often 34.5 inches tall rather than the 34.5-inch industry standard, but their tall cabinet boxes have changed hinge bore positions between series. A replacement door from one series will not align on another without re-boring – and most homeowners order the wrong part because the model number was never recorded. When we source a part for a Boulder City kitchen, we match the model number, the bore pattern, and the finish code, not just the cabinet size.

The OEM-versus-aftermarket decision for CWS is simple. For door fronts, drawer slides, and hinges that must match existing bore holes, the OEM or an exact-spec equivalent is the safer call. For box cabinets and structural components, a quality aftermarket equivalent that meets or exceeds the original spec is usually the better value. We’re an independent service provider, not affiliated with CWS, and we’ll tell you straight which side of that line your part sits on.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Kitchen Remodeling Is Failing

CWS components in Boulder City kitchens face a specific stressor: dry desert air for eight months and monsoon humidity spikes in July and August. That cycle loosens fasteners and opens seams. Here’s what to watch for.

  • Drawer slides that bind or grind. The slide mechanism has lost its lubrication or the ball bearings have flattened. Dry air in Boulder City accelerates this, and a slide that grabs at the halfway point is usually a slide that’s past its service life.
  • Cabinet doors that sag or drag on the frame. The hinge screws have pulled loose from the particleboard, or the hinge plate has bent. That’s a one- or two-visit fix, not a cabinet replacement.
  • Countertop seams that open near the sink or cooktop. The adhesive or the substrate has shifted from heat cycling or moisture. A seam that’s visible is a seam that will let water in.
  • Backsplash tile that lifts or grout that crumbles. The thinset bond has failed or grout has shrunk in the dry air. Loose tile over a counter is a water intrusion point behind the wall.
  • Cabinet boxes pulling away from the wall or from each other. The mounting screws have stripped from the stud or the cabinet has separated from its neighbor. This one is structural and should be checked before it drops.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A home office with a built-in desk and shelves

In Boulder City, a complete CWS-compatible kitchen remodel runs $14,000 to $45,000. A smaller kitchen scope lands at $9,000 to $20,000. Cabinet installation is $4,000 to $13,000, countertop installation $2,000 to $6,500, backsplash $800 to $2,500, and a kitchen island $3,000 to $10,000. Those ranges include tear-out, disposal, material, and labor.

What moves the number up: cabinet box replacement versus hardware-only, natural stone versus engineered surface, and whether the rough-in needs to move. What we don’t do is surprise you. The written price is the price. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge.

Need help with another label? We also work with KraftMaid, Cambria, and Silestone.

DIY or Call Us?

Some of this is safe for a homeowner to check. Tightening a loose hinge screw, adjusting a drawer slide tension screw, or re-caulking along a backsplash edge is fine. What we’d rather you not do: re-hang a cabinet that’s separated from the wall, cut into a countertop seam, or try to reset loose tile over a live electrical outlet. Those touch structure, water intrusion, or wiring, and a mistake becomes a bigger job than the one you started.

Our technicians have up to 22 years of experience, and they’re background-checked and uniformed. Call (844) 797-9259 for a free estimate and we’ll tell you what your CWS kitchen actually needs.

FAQs

A wood double vanity with two mirrors after a bathroom remodel

How long does a CWS kitchen component last in Boulder City? CWS cabinet hardware typically lasts 10 to 15 years in Boulder City’s dry climate, and cabinet boxes last 20 or more if they’re kept from water intrusion. Slides and hinges are the first to go. Call (844) 797-9259 for an exact quote – estimates are free.

Can my CWS kitchen be repaired instead of replaced? Often yes. Slides, hinges, door fronts, and single cabinet boxes are replaceable without touching the rest of the kitchen. Seam repair and backsplash tile reset are common. The repair-versus-replace call depends on whether the box is sound. Call (844) 797-9259 and we’ll give you the straight answer.

How long does the swap take? Hardware-only work is typically a single visit. A cabinet box replacement or a countertop swap runs one to three days depending on scope. Full kitchen remodels run two to four weeks. Your written scope will state the timeline before work starts.

How do you source the part? We identify the model number from the label inside your cabinet, match the bore pattern and finish code, and order through our documented supplier network. We don’t stock parts locally or carry them on a truck. The brand roster includes KraftMaid, Cambria, and Silestone, and we’ll name the exact part in the written quote.

Call Bradford Remodeling Boulder City at (844) 797-9259 to schedule your free estimate. We’ll put a written price in your hand before any work starts, answer the phone with a live person any hour of the day, and back the finished job with a 365-Day Done Right Promise in writing.

Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquetteA remodeled living room with built-in shelves around the fireplace

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch