A Bradford company - serving Boulder City, NV
A new rear addition with a vaulted beamed ceiling and tall windows
C
CWS · Boulder City

CWS Home Additions & ADU in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
A wide opening with a new beam where the kitchen wall was removed
A garage converted into a guest room and home office
A freestanding soaking tub in a remodeled primary bathroom
A whole-home remodel with the living, dining and kitchen areas opened up
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Home Additions & ADU: The Boulder City Owner’s Guide

A CWS-compatible home addition or ADU in Boulder City typically runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached ADU, installed, permitted, and inspected. We’re a Boulder City remodeling contractor that works with CWS system components and specs, and we don’t schedule these as same-day swaps – additions and ADUs are planned work that involves foundations, rough-ins, and inspections. If a CWS panel, tie-in, or system component has failed, you usually find out one of three ways: a hairline crack that keeps reopening along a seam, a heating or cooling loop that can’t hold pressure, or a permit correction that flags a mismatched spec. Below is what fails, what a real replacement costs in Boulder City, and when to call.

Call (844) 797-9259

Which CWS Models This Applies To

A finished backyard cottage with a small covered porch

CWS covers more than one product family, and the part that fits one series doesn’t fit another. Before you order anything, find the data plate or panel label – it’s usually on the interior face of the failed panel, inside a junction box cover, or on the original stamped structural drawing if you kept it. It gives you the series and a lot or model number. Take a photo of it; the number on the box is often the only reliable match.

Three compatibility traps we see in Boulder City:

  • Series drift. CWS revised panel profiles and connection details across series over the years. A panel that looks identical in a photo can have a different edge profile or fastener pattern, and it won’t seat.
  • Trim and finish codes. Two units with the same footprint can carry different trim packages, and the exterior finish code determines what cladding actually matches.
  • Older stamped drawings. If your home was added onto before the current CWS spec, the install may have used a discontinued component. You need the drawing, not the part number alone.

On OEM versus aftermarket: for structural and weather-sealing parts, we source OEM or documented equivalent – not a generic substitute. For trim and cosmetic pieces, a quality aftermarket match is fine and often saves money. We’re an independent Boulder City provider, not affiliated with CWS, so we match the spec and tell you straight which route makes sense.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Home Additions & ADU Is Failing

Additions and ADU failures rarely announce themselves. They show up as small, repeated symptoms a homeowner learns to live with until a permit or a leak forces the issue. These five are the ones we’re called about most in Boulder City.

  • A seam or joint that keeps reopening. Cracks that return after patching point to movement, not cosmetic wear – often a foundation or connection issue underneath.
  • Water intrusion at a panel edge or roofline. Failed flashing or sealant lets moisture past the envelope. In Boulder City’s dry heat with hard sun, sealant and gaskets degrade faster than the panels themselves.
  • Doors and windows that stick or won’t latch. A structure that’s settling or racking throws openings out of square – a symptom, not a hardware problem.
  • Heating or cooling that won’t hold. If a system loop or duct loses pressure or a zone won’t balance, the tie-in to the main house is usually the culprit.
  • A failed inspection or a correction notice. A code official flags a spec that doesn’t match the approved drawing. That’s a paperwork and component mismatch, and it stalls the project until corrected.

Any one of these is worth a look. Two or more together usually means something structural or envelope-related is moving, and the sooner it’s diagnosed the less it costs to correct.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A project lead and homeowner reviewing plans in a room under renovation

Here’s what a CWS-compatible addition or ADU runs in Boulder City, installed:

  • Home addition: $45,000 – $130,000
  • ADU construction: $90,000 – $220,000
  • Garage conversion (a lower-cost ADU path): $30,000 – $80,000
  • Panel, tie-in, or component replacement within an existing addition: quoted line by line against the scope

The range is driven by size, foundation and site work, whether plumbing and electrical have to be extended, permit and inspection costs, and finish level. You get a written price before any work starts – a real number, not “call for a quote” – with parts and labor broken out, and every completed project carries the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge. Permits are pulled and inspections passed before we call the job done.

DIY or Call Us?

Some of this you can safely check yourself. Photograph the data plate and any crack or water stain. Note when the symptom first appeared and whether it changes with weather. Measure the crack width. Compare a door opening against square. That information helps us and costs you nothing.

What you shouldn’t do is open an energized panel, cut into a structural connection, or attempt a flashing or envelope repair that hides a water problem instead of fixing it. Those are where DIY goes wrong – not because you can’t hold a tool, but because a misdiagnosed envelope or structural issue gets expensive fast. If a door won’t latch or water is getting in, call. Dial (844) 797-9259 and a live person answers, day or night, to schedule your free estimate.

FAQs

Footing forms with tied rebar for a home addition

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquette

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch