







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Bathroom Remodeling: The Boulder City Owner’s Guide
We install ECO Window Systems bathroom remodeling for Boulder City homeowners, and a full bath typically runs $9,000 to $28,000 installed, with a written price in your hand before any work begins. A smaller bath lands between $5,000 and $12,000. This isn’t an emergency part swap, so we don’t pretend to arrive the same afternoon; we schedule the work, pull the permits, and finish to spec.
Most Boulder City owners don’t set out to remodel a bathroom. They set out to fix one thing: a shower valve that won’t hold temperature, a window over the tub that’s fogged and letting desert grit in, a vanity that’s swelled at the baseboard, a fan that stopped pulling steam. Once a technician opens the wall and finds the substrate behind the tile has been moist for years, the small repair turns into a real scope. That’s the moment this page is for: you already know the product, and you want a straight number instead of a surprise at the door.
Which ECO Window Systems Products This Applies To

Compatibility starts with identifying exactly what you have. ECO Window Systems covers a range of bath fixtures and window-adjacent products, and the part that fits one series won’t fit another. Before anyone quotes you, we read three things off the unit: the manufacturer label (usually on the window frame head or the fixture housing), the rough opening dimensions, and the model or series code. Take photos of all three. That label is the single most useful thing you can hand a technician.
The OEM-versus-aftermarket decision matters here. OEM parts guarantee fit, but they also carry the scheduling wait that comes with ordering from the original manufacturer. A quality aftermarket valve cartridge, window balance, or fan motor built to the same spec can cut days off the timeline when the finish and dimensions match. Where the spec is tight, especially on tempered or impact-rated glass over a wet zone, we stay with OEM-compatible parts and documented specifications. Our technicians have up to 22 years of experience reading these labels, and we’re honest when an aftermarket part is the wrong call.
One Boulder City-specific gotcha: the region’s extreme summer heat and hard water work together on bath fixtures and window seals. A valve or cartridge that lasts fifteen years in a mild climate can fail in half that time here. We spec parts for that reality, not for the national average.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Bathroom Remodeling Is Failing
- Shower valve that drifts in temperature. The mixing cartridge is worn or scaled. Hard Boulder City water accelerates the wear, so a valve that “suddenly” won’t hold warm is usually months into a slow decline.
- Fogged or leaking window glass over the tub. The window seal has failed. In our heat, a compromised seal lets condensation build between panes and can rot the surrounding sill.
- Vanity cabinet swollen or soft at the base. Long-term moisture has reached the substrate. The cabinet isn’t the real problem; the moisture source behind or under it is.
- Exhaust fan running quiet or not at all. The motor or its housing has failed. A dead fan lets steam sit against the walls, which is often the root of everything else on this list.
- Efflorescence or loose grout on the shower floor. Water is getting behind the tile. White mineral bloom means the waterproofing layer is no longer doing its job.
Replacement Cost & What’s Included

Here’s the honest range for Boulder City, and every figure comes with a written, line-item price before we start:
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
What drives the range is plain: how far the damage runs behind the tile, whether the window or fan has to come out, and whether you’re keeping the existing footprint or moving plumbing. We break parts and labor out separately so you see what you’re paying for. Every completed project carries our 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There are things you can safely check yourself: look at the window label and photograph it, test the exhaust fan by holding a tissue to the grille, and wipe the shower floor to see whether white mineral bloom returns. That’s diagnosis, not disassembly.
Where DIY goes wrong is behind the wall and behind the fixture. Bathroom remodeling touches plumbing lines, moisture barriers, and, when a window is involved, glass that sits in a wet zone. Getting the waterproofing wrong is invisible for a season and expensive for the next five years. One more honest note: we’re an independent contractor, not affiliated with ECO Window Systems. That independence is a feature, because we quote the parts that actually fit your unit rather than defaulting to whatever’s easiest to order. Call (844) 797-9259 when you want a straight number.
FAQs

How long should an ECO Window Systems bathroom part last in Boulder City? A valve cartridge or fan motor typically lasts several years in our climate, but hard water and summer heat shorten that window compared to milder markets. If yours is past its prime and drifting, replacing it early prevents water damage. Call (844) 797-9259 for an exact quote, and estimates are free.
Can it be repaired instead of replaced? Often yes. A seeping valve is frequently a cartridge, and a noisy fan is frequently a motor, not the whole unit. When the substrate or waterproofing is the real failure, a targeted repair is the wrong spend, and we’ll tell you that plainly. Call (844) 797-9259 and we’ll scope it honestly.
How long does the swap take? A single-part replacement is a same-day job once the right part is in hand. A full bath remodel runs weeks, not days, because permits are pulled and inspections passed before we close out. Call (844) 797-9259 to schedule your free estimate.
How do you source the part? We confirm your model from the label, spec against the genuine ECO Window Systems part or a documented aftermarket equivalent, and order what fits the first time. We don’t stock parts and don’t carry them on a truck, so the right match is confirmed, not guessed. We also work with KraftMaid, Cambria, and Silestone where the project calls for them. Call (844) 797-9259 for your free estimate.
Get a Written Price Before Any Work Starts
Disciplined scope, a fixed written price, background-checked uniformed technicians on every job, and a live person answering the phone around the clock. That’s The Garrison Standard, and it’s how a Boulder City bathroom project stays squared away from first look to the signed guarantee in your hand. Call Bradford Remodeling Boulder City at (844) 797-9259 for a free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












