







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Fence Installation: The Boulder City Owner’s Guide
If you have a pool fence, patio enclosure, or gate assembly built from Mr-Glass components and a section has cracked, gone cloudy, or pulled loose at the frame, replacement glass and hardware runs $3500 – $9000 installed depending on linear footage, panel count, and gate configuration. We’re an independent contractor and not affiliated with Mr-Glass, but we source compatible panels and install them across Boulder City. Most owners find the problem the same way: a hairline crack spreads after a hot summer, a panel clouds at the edge where the seal broke, or a gate hinges loose and won’t latch square.
A word on safety before anything else. Tempered glass panels under tension in a gate or fence frame are heavy and can shatter without warning if a frame is bent or a hinge is working loose. If you see a spidering crack or a panel that rocks in its frame, keep people and pets clear and have it looked at by someone who does this work. That’s not a scare tactic; it’s how tempered glass behaves when it’s compromised.
Which Mr-Glass Models This Applies To

Mr-Glass has built pool and patio fencing under a few frame lines over the years, and the panel and hardware specs are not interchangeable between them. The reliable way to identify what you have is the frame profile and the glass thickness, not the color. Panels typically run 3/8-inch or 1/2-inch tempered, and a 1/2-inch panel will not seat into frame channels cut for 3/8-inch glass. Measure the exposed panel edge with calipers if you can, and note the frame width and post spacing before we talk.
Once we know the frame line, the OEM-versus-aftermarket call is real. Mr-Glass-branded replacement panels carry the original spec, but availability and lead time can stretch, and for a straight-run fence section a quality aftermarket tempered panel cut to the same dimensions performs the same job. For gates, hinges, and latches we lean toward hardware matched to the frame’s mounting holes so nothing has to be re-drilled. If you’re also refreshing cabinetry or surfaces inside the house, we service KraftMaid, Cambria, and Silestone alongside our exterior work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Fence Installation Is Failing
- Cloudy or milky edges on a panel. The edge seal has failed and moisture is creeping between the glass and its laminate or coating. In Boulder City’s dry heat and hard sun, edge seals age faster than most homeowners expect.
- A crack that spread from a corner. Usually a panel was installed slightly proud of the frame channel, and thermal cycling over a summer pushes the stress to the corner until it lets go.
- A gate that no longer latches square. Hinge screws have worked loose in the frame or the post has shifted. Left alone, the whole gate leans and loads the glass.
- A panel that rocks or rattles in its frame. The setting blocks or gaskets have shrunk or slipped out. This is the one to address fastest, because a loose panel takes impacts it wasn’t meant to.
- Chalky, etched glass surface. Long UV exposure plus pool splash or hard-water spray etches the surface. The glass is sound but the clarity is gone, which is a cosmetic replacement rather than a safety one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed Mr-Glass fence replacement in Boulder City runs $3500 – $9000. A single straight-run panel swap sits near the low end; a full run with a gate rebuild and new hardware lands higher. The range is driven by linear footage, panel thickness, whether the frame is reused or replaced, and gate complexity.
Every quote is a written, line-item price before any work starts: panels, hardware, labor, and disposal of the old glass, all itemized so you see exactly where the money goes. No number moves at the door. We pull the permits that apply and pass the inspections. The work carries our 365-Day Done Right Promise: a full-year written guarantee, and if anything we installed fails inside that window, we come back and correct it at no charge. Our technicians have up to 22 years of experience, and they arrive background-checked and uniformed so you know who’s on your property.
DIY or Call Us?
Some of this you can safely check yourself. Walking the run to note which panels are cloudy or cracked, confirming the gate swings and latches freely, and measuring frame width and post spacing all help us quote faster. What we don’t recommend is pulling a tempered panel out of a frame or re-hanging a gate on your own. A sheet of 3/8- or 1/2-inch tempered glass is heavy, awkward, and unforgiving of a bad grip, and a gate that’s under tension can swing or drop the moment a hinge comes free. There’s also the frame alignment: a panel seated a fraction off will crack within a season. Call (844) 797-9259 and we’ll take the measurements from there.
FAQs

Expect roughly 15 to 25 years from a properly installed panel in this climate, less if it takes direct afternoon sun and pool splash without any shade. Edge seals and hardware are usually what fail first, not the glass itself.
Sometimes. Loose hinges, slipping gaskets, and a gate that’s out of square are all repairable without new glass. A cracked or delaminated panel cannot be repaired; it has to be replaced, because the temper is gone and the panel is a safety risk. Call (844) 797-9259 for a free assessment and an exact quote.
A single panel replacement is usually a few hours; a full run with a gate rebuild can run one to several days depending on footage and lead time on the ordered panels. We give you the schedule in writing up front.
We identify your frame line from its profile and glass thickness, then match OEM dimensions or a quality aftermarket tempered panel cut to spec for a straight run. Hardware is matched to your existing mounting holes. Call (844) 797-9259 for your free estimate.
Ready to get your fence squared away? Call Bradford Remodeling Boulder City at (844) 797-9259 for a free estimate. A live person answers, day or night, and you’ll have a written price before any work begins.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












