







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The Boulder City Owner’s Guide
Mr-Glass driveway and paver work in Boulder City falls into a short list of jobs: a fresh paver driveway, a concrete pour, resealing, or a repair where a section has heaved, cracked or settled. Installed paver driveways here run $7,000 – $18,000, concrete driveways run $4,500 – $12,000, and most of these projects are scheduled within a few weeks of a written quote, not turned around in a day.
Owners usually figure something’s wrong the same way. The car rocks a little pulling into the garage. A paver shifts underfoot or a corner lifts. Water pools against the foundation after a storm instead of running to the street. The joints open up and weeds move in. By the time the pool is obvious, the base layer underneath has usually been failing for a couple of seasons.
Which Mr-Glass Models This Applies To

Mr-Glass covers a broad catalog of driveway and hardscape profiles, and the part that matters isn’t a mechanical component – it’s the unit itself: paver style, thickness, finish, and the edge restraints and joint sand that go with it. Paver thickness is where Boulder City owners get tripped up. A 2 3/8-inch paver is fine on a patio. On a driveway that sees the weight of a full-size truck day after day, you want the full 3 1/8-inch profile, and mixing the two in one field is the most common compatibility mistake we correct.
To identify what’s actually installed, check three things. Measure the thickness at an exposed edge. Note the nominal face dimensions, since Mr-Glass runs standard modular sizes alongside proprietary profiles that don’t interchange. Look at the joint sand color and texture. Most lots keep a spare unit with the original paperwork, which is the fastest way to match a discontinued run.
OEM versus aftermarket is a real decision. OEM Mr-Glass units give you an exact color and dimension match, which matters when you’re patching a field rather than replacing it. A quality aftermarket paver is often the smarter buy when the whole driveway is coming out – you get a documented spec, a manufacturer warranty, and you can choose a profile that handles the Mojave heat and sun exposure better than the original. We source both and price them side by side in writing before you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Driveway & Pavers Is Failing
- A paver rocks or shifts underfoot. The bedding sand has migrated or the base wasn’t compacted to depth. Base failure grows with every freeze-thaw and rain cycle.
- Corner or edge units lift and separate. Usually a missing or failed edge restraint. Without it, the field spreads outward and opens the joints.
- Water pools near the garage or house instead of draining. The grade has settled or was pitched shallow from the start. Standing water against a foundation is the symptom owners should never sit on.
- Joint sand washes out and weeds sprout. Sand loss lets the pavers work against each other, and in Boulder City’s summer sun, UV breaks down a weak polymeric joint in a couple of seasons.
- Hairline cracks and crumbling at the surface. For concrete, this often traces to too little air entrainment or a mix that couldn’t handle the heat during cure. For pavers, it points to a soft base underneath.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Boulder City, broken out by scope so you can size your own project:
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway replacement (remove old, reinstall): $5,000 – $14,000
- Driveway sealing: $250 – $700
- Paver patio installation: $3,500 – $11,000
What moves the number: total square footage, how much excavation and hauling the old surface needs, base depth, edge restraint, and the paver line you pick. Every quote is written before the first tool comes off the truck, with parts and labor on separate lines, so nothing magically changes when the crew arrives. Every completed driveway carries our 365-Day Done Right Promise – if the work fails inside a full year, we come back and correct it at no charge.
DIY or Call Us?
There’s plenty an owner can check without touching a shovel. Look for settled sections, probe the joint sand with a screwdriver, watch where water runs during a rainstorm, and note which pavers move when the car rolls over them. That walkthrough tells you whether you’re looking at a half-day fix or a rebuild.
Where DIY goes wrong is the base. Replacing a paver or two seems simple until the polymer joint doesn’t match, the edge restraint isn’t reset, or you’re building on the same failed base that caused the problem. Excavation, compacted base to the right depth, and proper grading against the house are what separate a driveway that lasts from one that’s back to rocking next spring.
We serve Boulder City as an independent provider; we’re not affiliated with Mr-Glass, and we install and repair their products on their merits. Call (844) 797-9259 for a free written estimate – a live person answers, day or night.
FAQs

A properly built paver driveway typically lasts 25 to 30 years; concrete lasts 20 to 30. In Boulder City’s climate, the biggest factor is sun exposure plus the flash rain – UV degrades joint sand faster than most owners expect, and runoff has to be graded correctly the first time or it finds the base.
Often yes. Isolated rocking pavers, failed edge restraint, and washed-out joints are all repairable, and sealing on a schedule extends the life of an otherwise sound driveway. Once settling runs across a large section, though, patching throws good money after a bad base – replacement is usually the honest call. We’ll tell you which one you’re looking at before any work is priced.
A sealing or joint-sand repair is a day or less. A full paver driveway install typically runs 3 to 5 days depending on square footage and hauling. We schedule around weather and give you a written timeline with the quote, so you know when your driveway is back.
We measure the existing units, identify the profile and finish, and match against the Mr-Glass catalog, checking thickness and nominal dimensions against the field. Where the exact line is discontinued, we price a close aftermarket equivalent alongside an OEM match, in writing, so you can compare.
Bradford Remodeling works with a documented roster of brands – Belgard and Unilock on hardscape, KraftMaid, Cambria, and Silestone on the interior side – which means the paver spec on your Boulder City driveway is traceable to a manufacturer and a warranty, not a crew’s best guess. Every project starts with a written price and a real person on the phone.
If your driveway in Boulder City is cracking, sinking, or washing out, call (844) 797-9259 for a free estimate. Give us a call and we’ll walk the site, put the exact scope and price in writing before any work starts, and back the finished job with the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












