A Bradford company - serving Boulder City, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Barrette · Boulder City

Barrette Kitchen Remodeling in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A finished basement family room with a media wall and wet bar
A powder room with botanical wallpaper and a stone sink
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Kitchen Remodeling: The Boulder City Owner’s Guide

Bradford Remodeling Boulder City installs Barrette-compatible kitchen remodels with a written price before any work begins, and full kitchen projects in Boulder City typically run $14,000 – $45,000 depending on cabinet scope, surfaces, and whether the rough-in needs moving. We schedule the free estimate on your timeline rather than promising same-day crews, and that estimate is a firm line-item number, not a range that moves at the door. Barrette doesn’t make this part anymore in the exact series older Boulder City homes were fitted with, so most owners land here after a search for a match. The typical discovery is quiet: a drawer that has never sat flush, a cabinet door that won’t hold a consistent reveal, or a pantry unit that finally gives out mid-week while you’re pulling out a pot for dinner.

Call (844) 797-9259

Which Barrette Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Barrette built kitchen products across several series lines, and the ones that turn up in Boulder City renovations most often are the flat-pack and ready-to-assemble cabinet lines sold through national retailers from roughly the late 1990s through the mid-2010s. Series designations matter because hinge bore spacing, drawer-box depth, and shelf-pin hole patterns changed between runs even within the same product family. Before we quote anything, we photograph the interior label, the hinge plate, and a measurement across the cabinet face. The label tells us the series; the plate tells us the hinge pattern; the measurement confirms whether a current replacement will actually sit in the same opening.

The OEM-versus-aftermarket call is where Boulder City owners get burned. Original Barrette parts for discontinued series are scarce, and the “OE fit” listings sold online often ship a generic hinge or glide that fits the opening but not the door weight. We prefer documented aftermarket equivalents with published load ratings when the OEM part can’t be sourced, because a hinge rated for a 12-pound door will hold in a bathroom and fail in a kitchen where the door is opened thirty times a day. Bradford is an independent contractor, not affiliated with Barrette, so we go by the specs on the part rather than a brand promise. We also install KraftMaid, Cambria, and Silestone when a full cabinet refresh makes more sense than a parts chase.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Kitchen Remodeling Is Failing

  • Drawers that drag or won’t stay closed. The glide or the roller track has worn past tolerance. In Boulder City’s dry air, the nylon rollers on older Barrette boxes get brittle before the metal does, which is why a drawer that slid fine last spring suddenly binds in July.
  • Cabinet doors that sag at the hinge side. The hinge plate screws have pulled from the stile, or the plate itself has cracked. A sagging door that isn’t corrected puts sideways load on the other hinge and takes both out together.
  • A pantry or corner unit that leans away from the wall. Fasteners into the substrate have loosened. This is a structural symptom, not a parts symptom, and it needs the cabinet pulled and re-set, not a new bracket.
  • Cracks at the cabinet seams or at the backsplash joint. Movement in the cabinet run has transferred to the surface above it. If the seam opens in one season and closes in another, the cabinets are shifting and the surface is taking the stress.
  • Shelves that bow under normal weight. Particleboard and MDF shelving in older Barrette boxes loses stiffness over time, especially near the span center. A bowed shelf is usually a sign the cabinet has been overloaded for years, and a replacement shelf needs a thicker core.

Replacement Cost & What’s Included

A remodeled living room with built-in shelves around the fireplace

In Boulder City, a Barrette kitchen remodel with the cabinet scope corrected runs $14,000 – $45,000 for a full kitchen. A small kitchen comes in at $9,000 – $20,000, cabinet installation alone at $4,000 – $13,000, and countertop installation at $2,000 – $6,500. Adding a backsplash runs $800 – $2,500, and a kitchen island is $3,000 – $10,000 installed. The range is driven by cabinet count, whether the rough-in moves, surface material, and whether the substrate behind the cabinets needs repair once the old run comes out.

Every quote separates parts and labor as line items, and the price you sign is the price you pay. Bradford doesn’t reprice at the door. All completed work carries the 365-Day Done Right Promise: a written guarantee for a full year, and if the work fails inside that window, we return and correct it at no charge. That covers the install we performed, not wear from a dropped cast-iron pan, and we spell out that boundary in writing before the first tool comes out.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

An owner can safely check a few things. Photograph the cabinet label, measure the opening across the face, tighten exposed hinge screws with a hand driver, and confirm whether the door sags because of the plate or because the screw hole has stripped. That information makes the estimate faster.

Where it goes wrong is at the structural end. Re-securing a leaning cabinet, correcting a shifted run, or replacing a countertop joint means moving weight-bearing units and re-fasting into the substrate, and a cabinet that comes off the wall while loaded with dishes is a genuine hazard. Gas and electrical work behind a cabinet run is not a homeowner job at all. We’d rather you stop at the photo and let a trained installer take it from there. Call (844) 797-9259 and a live person answers, day or night.

FAQs

A single-story rear room addition with tall windows and a new patio

Get Your Written Price Before Work Starts

Bradford Remodeling Boulder City gives every homeowner a written price before any work begins, and that number doesn’t move. A live person answers (844) 797-9259 around the clock. Call today to schedule your free estimate for your Barrette kitchen in Boulder City. Estimates are free, and the number you get is the number you sign.

Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled primary bathroom with a soaking tub and walk-in showerA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled staircase with wood treads and a slim metal railing

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch