







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Bathroom Remodeling: The Boulder City Owner’s Guide
Barrette bathroom remodeling installed in Boulder City typically runs $9,000 – $28,000 for a full bath and $5,000 – $12,000 for a small one, with the number set in writing before any work starts. If your Barrette vanity, shower surround, or fixture set is failing, the fix usually isn’t a single part swap – it’s a substrate or waterproofing problem behind the finish that never got corrected the first time. We install Barrette-compatible materials and replacements to manufacturer spec, and we do it under a written price and the 365-Day Done Right Promise.
Owners in Boulder City usually find out the same way. A vanity cabinet starts rocking on a floor that was never leveled. Grout at the shower floor goes soft and dark within a year. A finish film lifts at the tub apron. You go looking for a Barrette part number, and what you actually need is a contractor who will pull the assembly back to the studs and fix the cause.
Key Takeaways
- Barrette bathroom remodeling in Boulder City: $9,000 – $28,000 full, $5,000 – $12,000 small bath.
- Most “part failures” trace to substrate, waterproofing, or leveling issues, not the Barrette part itself.
- Written price before work begins, every time – no numbers that move at the door.
- 365-Day Done Right Promise: if the work fails inside a year, we return and correct it at no charge.
- Call (844) 797-9259 for a free estimate. A live person answers.
Which Barrette Models This Applies To

Barrette makes outdoor building products – fencing, railing, vinyl and composite – so before anything else, be clear about what you own. If you have a Barrette-named vanity, shower surround, or bath fixture, the brand plate and model number will be somewhere specific: inside the cabinet door on a sticker, molded into the back of the surround panel, or laser-etched on the drain collar. Photograph the label before you order anything. Model and series codes drive the spec, not the look of the part.
The compatibility gotcha we see most in Boulder City: two Barrette series can share the same footprint and still use different panel thicknesses or trim profiles. A panel that measures right on the tape can be wrong on the reveal. Measure the substrate opening, not the old panel face, and note the panel thickness (they run in fractions of an inch, so a caliper or a careful tape read matters).
On OEM versus aftermarket: for visible trim and low-stress parts, a quality aftermarket equivalent is a reasonable call if it matches the spec sheet. For anything structural or behind the wall – substrate panels, waterproofing membranes, drain assemblies – stay with OEM or a documented equivalent with a manufacturer warranty. Bradford Remodeling Boulder City is an independent service provider, not affiliated with Barrette. We match to the spec and show you what we’re installing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Bathroom Remodeling Is Failing
Each symptom below points to a root cause. Fix the symptom alone and it comes back.
- Vanity rocks or doors drift out of alignment. The floor under it was never leveled, or the cabinet was shimmed and never shimmed properly. Barrette cabinetry is built square; if it’s out, the floor is the problem.
- Grout at the shower floor goes soft, dark, or crumbly within a year. Water is getting behind the tile. That’s a failed waterproofing membrane, not a grout color issue, and it will keep failing until the assembly is rebuilt.
- Finish film lifts or bubbles at the tub apron or surround edges. Moisture trapped at the panel edge from a caulk joint that let go. Boulder City’s swings between dry heat and monsoon humidity punish a bad joint faster than most markets.
- Caulk lines keep reopening every few months. Movement, not caulk quality. Something behind the wall or under the floor is shifting.
- Musty smell that returns after cleaning. Moisture is colonizing the substrate. This is the one to act on early, before the framing gets involved.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Boulder City, calibrated to this market and set in writing before we start:
| Scope | Installed Range |
|---|---|
| Bathroom remodel (full) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What drives the range: whether the substrate is sound or has to be replaced, waterproofing scope, tile versus panel finish, fixture grade, and whether the rough-in has to move. What’s included is stated line by line – parts, labor, disposal, and the written guarantee – so nothing shows up as a surprise on the final invoice. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that window, Bradford returns and corrects it at no charge.
DIY or Call Us?
You can safely do three things yourself: photograph the model label, measure the substrate opening, and check for soft spots or movement with a hand press. That’s the diagnostic work, and it’s genuinely useful.
Where DIY goes wrong is behind the finish. Waterproofing membranes have to be lapped and sealed to spec; a bad membrane fails silently for months before you see it. Vanity leveling and rough-in alignment decide whether the doors track for years or drift in one. And any work involving the electrical circuit at the vanity or the plumbing rough-in is a licensed trade for good reason. If you’re not sure what you’re looking at, call us at (844) 797-9259 – a live person answers, and the estimate is free.
FAQs

A correctly installed Barrette bathroom finish should hold 15 – 20 years for cabinetry and surrounds, and 8 – 12 years for caulk joints and grout with normal maintenance. The variable in Boulder City is the dry-heat-to-monsoon swing, which stresses joints harder than a steady climate. If yours is failing inside 5 years, the install is the suspect, not the product.
Sometimes – a vanity can be re-leveled and re-hung, and a single surround panel can be swapped if the membrane behind it is intact. Once water has reached the substrate, repair is a patch on a bigger problem. We’ll tell you which one you’re looking at after we open it up, and the written price shows both paths before you commit. Call (844) 797-9259 for an exact quote – estimates are free.
A vanity or single shower replacement typically runs 1 – 3 days. A full bathroom remodel with substrate and waterproofing work runs 2 – 4 weeks. The schedule is written into the scope, and the site gets cleaned and cleared at close with your signed guarantee in hand.
We match to the model and series code off your label, then order through documented manufacturers with traceable specs and warranties – the same roster that includes KraftMaid, Cambria, and Silestone for other rooms. We don’t claim to stock parts, and nothing rides on a truck. You see the part number on the written scope before we order.
If your Barrette bathroom is failing and you’re tired of guessing which part to buy, call Bradford Remodeling Boulder City at (844) 797-9259 for a free estimate. You’ll get a written price before any work starts, background-checked technicians on the job, and the 365-Day Done Right Promise on the finished work.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












