







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Windows & Doors: The Boulder City Owner’s Guide
We install and service Barrette windows and doors for Boulder City homeowners, and most full unit replacements run $4,500 – $15,000 installed, with single-unit glass or hardware repairs priced far lower. Barrette patio doors and vinyl windows show their failure in stages: a slider that suddenly needs a shoulder to close, fog between the panes, or a lock that no longer catches. Boulder City’s swings from desert summer heat to cold winter nights stress vinyl frames and weather seals hard, which is why so many owners here discover a failing unit right when the wind picks up. Call us at (844) 797-9259 and we’ll quote the fix in writing before any work starts.
Two things up front. Bradford Remodeling Boulder City is an independent service provider, not affiliated with Barrette. And every completed job carries our 365-Day Done Right Promise: if the work fails within a year of completion, we come back and correct it at no charge.
Which Barrette Models This Applies To

Barrette makes windows and doors under several series and model lines, and parts do not swap cleanly between them. Before we order anything, we identify the exact unit from the manufacturer’s label – usually a sticker on the frame or in the track channel – and match the part to that series number, not just to “a Barrette door.” Sash balances, rollers, locks, and weather seals are sized to the specific frame extrusion and panel weight. Get that wrong and a roller kit that looks identical will bind, or a balance will let the sash drop.
The OEM-versus-aftermarket call matters most on moving parts. Barrette’s own replacement rollers and locks are the surest fit, especially on older series where tolerances are tight. For glass units and weather stripping, quality aftermarket equivalents are often just as good and cost less. We tell you which is which on the written quote so you’re not paying OEM prices for a part where it doesn’t matter. We also handle KraftMaid, Cambria, and Silestone work on the same homes when a window or door swap sits inside a larger project.
How to find your model: open the sash or slide the door back and look for a label on the jamb, the head frame, or the track. Photograph it before you call. If the label is gone, we measure the rough opening, the panel size, and the glass thickness to narrow it down. That one label saves a lot of wrong-part returns.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Windows & Doors Is Failing
These are the symptoms Boulder City owners call us about most, and what’s usually behind each one:
- Sliding door drags or jumps the track. Worn rollers or a track packed with desert grit. The roller bearings flatten and the panel drops, then the lock stops lining up. Usually a roller and track-cleaning job, not a whole new door.
- Fog or condensation between the panes. The sealed glass unit has lost its seal. Once moisture gets inside, the unit is dead; the fix is a new insulated glass unit, not a cleaning.
- Lock or handle won’t latch. The lock mechanism or keeper has worn or shifted. A misaligned lock is also a security issue, so it’s worth fixing promptly.
- Drafts or whistling at the edges. Failed weather seals and sweeps. Our wind and dust push through any gap, and a worn sweep is the usual culprit on a sliding door.
- Sash won’t stay up or slams down. A failed balance spring on a double-hung. The balance carries the sash weight, and when it lets go the window becomes hard to open and unsafe to prop.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a full Barrette window replacement in Boulder City, installed, expect $4,500 – $15,000. If you’re upgrading to impact-rated glass, the range runs $8,000 – $25,000. Single-part swaps – a roller set, a lock, a sweep, a glass unit – sit at the low end; whole-unit replacement drives the top of the range. What moves the number: how many units, glass type (standard versus impact or low-E), frame condition, and whether the rough opening needs any correction.
Every quote is a written price before any work starts, with parts and labor broken out line by line, so you see exactly what the part costs and what the install costs. No numbers that move at the door. The 365-Day Done Right Promise covers the completed work for a full year: if it doesn’t hold, we return and correct it at no charge. That’s the whole guarantee, stated plainly.
DIY or Call Us?
Some checks are safe to do yourself. Clean the door track, tighten visible screws on a handle, test the lock by hand, photograph the model label, look for fog inside the glass. Those tell you what’s likely wrong without touching anything under load.
Where it goes wrong: sealed glass units can’t be repaired at home (they’re replaced, full stop), balance springs on a double-hung store real energy and can snap if you don’t know the correct removal sequence, and a dropped sliding panel is heavy enough to cause injury when it comes off a bent track. We’d rather you leave those to a trained technician. Our technicians have up to 22 years of experience, are background-checked and uniformed, so you know who’s coming through your door. Call (844) 797-9259 for a free written estimate.
FAQs

How long do Barrette windows and doors last in Nevada? Barrette vinyl units typically last 20 to 30 years, but in Boulder City’s sun and temperature swings, the seals and moving parts wear faster than the frame – often a roller, sweep, or glass unit fails years before the window itself does. Replacing that one part usually buys years more service.
Can the part be repaired instead of replaced? Often yes. Worn rollers, locks, sweeps, and balances are replaced individually, and a fogged glass unit is swapped without touching the frame. Full-unit replacement only makes sense when the frame itself is cracked, warped, or leaking at the perimeter.
How long does the swap take? A single part – a roller set, a lock, or a sweep – is typically a same-visit job once the part is on hand. A full glass unit or whole-window replacement takes longer and depends on the order lead time. We confirm the timeline on the written quote. Call (844) 797-9259 to schedule your free estimate.
How do you source the right Barrette part? From the model and series number on your unit’s label, matched to the exact frame and panel. When the label is missing, we measure the opening and panel to identify it. We don’t stock parts and we don’t carry them on a truck, so we order the correct part to your specific model rather than guessing at the door. Estimates are free – call (844) 797-9259.
Whether it’s one fogged pane or a sliding door that won’t latch, we’ll give you a straight number and a written guarantee before a single tool comes out. Call Bradford Remodeling Boulder City at (844) 797-9259 to schedule your free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












