







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Fence Installation: The Boulder City Owner’s Guide
Barrette fence installation in Boulder City runs $3,500 – $9,000 for a typical residential run, and most replacements are scheduled within days, not weeks. The reader who lands here usually already knows the problem: a gate that drags, a post that leans after monsoon season, a picket that cracked at the rail pocket, or a section that’s lost its hold in caliche-hard soil. Barrette makes vinyl and aluminum fencing – the Regis, Riviera, and ProSeries lines are the ones we install most – and the failure almost always traces to one part: a hinge, a post cap, a rail bracket, a bottom rail, or the post itself.
Which Barrette Models This Applies To

Barrette’s residential fence lineup splits into two families. The vinyl side includes Regis, Riviera, and the premium Kona and Sierra profiles; the aluminum side runs through the ProSeries and Delgard lines. Each family uses its own post dimensions (typically 5″ x 5″ vinyl posts and 2″ x 2″ or 2.5″ x 2.5″ aluminum posts), its own rail pocket spacing, and its own hinge and latch pattern. Here’s the compatibility gotcha that trips up most Boulder City owners doing this themselves: a 5″ Regis post cap will not seat on a Riviera post, and a Delgard gate hinge won’t fit ProSeries rails, even though the two look identical on the shelf.
Before ordering a part, identify the model. Barrette stamps the profile name inside the top rail or on the post’s inner web. If the stamp is faded by UV, measure the post’s outside face, the rail’s pocket depth, and the gate frame’s swing clearance – those three numbers will match you to the right series. On the OEM-versus-aftermarket call, we source Barrette OEM parts when the failure is under warranty or the profile is proprietary. For wear items like hinges and latches, a quality aftermarket match is fine if the metal gauge and hole pattern line up. Bradford Remodeling Boulder City is an independent service provider and is not affiliated with Barrette.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Fence Installation Is Failing
Boulder City’s sun and dry heat break vinyl fence parts faster than most of the country. With summer temperatures routinely topping 105°F and UV index running high year-round, vinyl becomes brittle along the rail pockets and gate frames within 8 to 12 years. Combine that with caliche-heavy soil that expands and contracts, and the failure signs are predictable.
- Sagging gate that won’t latch. The hinge plate has fatigued or the top hinge hole has worn oversized – common on 12-year-old Regis gates where the frame has flexed under UV exposure.
- Leaning post after a rain event. The post footing has lost its grip in the caliche layer, or the post material itself has cracked at grade. A post that moves more than 1/4 inch should be reset, not just topped with a new cap.
- Cracked picket at the rail pocket. The stress point where the picket meets the rail – one of the first places vinyl fatigues. A single cracked picket usually means the rail tension is off, not that the picket was defective.
- Loose or missing post cap. The cap is the first line of defense against water and UV. A missing cap lets water wick into the post top and freeze-crack it in cold snaps.
- Rattling or displaced bottom rail. The bottom rail bracket has worked loose from settling soil or thermal expansion, letting the rail slide out of its pocket.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a typical Boulder City residential run, a Barrette-compatible fence installation replacement runs $3,500 – $9,000. That range covers the failed section only – post, rails, pickets, hardware, and gate re-hang where needed. A single gate hinge or latch replacement will land on the low end. A full run replacement with new footings will land on the high end.
What drives the range: the number of posts being reset or replaced, whether the footing needs to be dug through caliche (which adds labor), the fence height (6-foot privacy runs cost more than 4-foot), and whether the gate frame is being rebuilt or just re-hung. We give a written price before any work starts – no numbers that move at the door. The work carries the 365-Day Done Right Promise: if any part of the repair fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
There’s a safe DIY lane here. You can tighten a loose gate hinge, replace a missing post cap, or swap a straightforward picket – those are low-risk and worth doing yourself if you’ve already identified the Barrette model. Where DIY goes wrong: resetting a leaning post in caliche soil. A post that’s only partly dug out will lean again within a season, and a post that’s dug too deep or not concreted correctly can pull a 6-foot gate frame out of square. The second failure zone is the gate hinge. A hinge that’s incorrectly spaced puts the full gate weight on a single anchor, which is how gate failures repeat. If your gate has fallen once, call us. For a free estimate on any Barrette fence repair in Boulder City, call (844) 797-9259 – a live person answers, 24/7.
FAQs

How long should Barrette fence parts last in Boulder City? Eight to twelve years for gate hardware and rail brackets in Boulder City’s climate, longer for posts and pickets if the caps stay intact. The dry heat and high UV here age vinyl roughly 20-30% faster than coastal markets.
Can the failed part be repaired instead of replaced? Sometimes yes. A sagging gate can often be re-hung on new hinges without replacing the frame, and a leaning post can sometimes be re-set rather than replaced. The repair-versus-replace call depends on whether the post wood or vinyl core is cracked – we check that before quoting. Call (844) 797-9259 for a free assessment.
How long does the replacement take? A hinge or latch swap is usually under two hours. A post reset, one to two days. A full run replacement, two to four days depending on footage and whether new footings are needed. We schedule around Boulder City’s heat, so crews work mornings on summer installs.
How do you source the correct Barrette part? From the model identification – the stamped profile name, the post dimensions, or the rail pocket measurement. We order OEM parts when the profile is proprietary and match quality aftermarket hardware when it isn’t. Either way, the part is documented on your written quote before we install it.
Bradford Remodeling Boulder City installs and replaces premium building products including Barrette fencing, and works with KraftMaid, Cambria, and Silestone on interior projects. Every job carries a written price and a 365-Day Done Right Promise. Call (844) 797-9259 for a free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












