







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Driveway & Pavers: The Boulder City Owner’s Guide
Barrette driveway and paver installation in Boulder City runs $7,000 to $18,000 for a full driveway and $3,500 to $11,000 for a patio, and we install Barrette-compatible hardscape with a written, itemized price before any work starts. Most Boulder City homeowners discover a failure the same way: a paver lifts at the apron after a summer of heat, or a corner of the driveway sinks where the base never got compacted right.
Once that first loose unit shows up, the problem has usually been building under the surface for a season or two. Boots catch on a rocking paver, the joint sand washes out in a monsoon, and a joint you could not see last spring is now a finger-wide gap. What looks like a part failure is almost always a base or bedding failure underneath.
Which Barrette Models This Applies To

Barrette makes a wide range of paver and wall products, and the piece that matters is not a model number stamped on the part. It is the profile, thickness, and color line the product came from. The common Barrette hardscape lines in this market are pavers, retaining wall blocks, and step or cap units, and each comes in specific nominal thicknesses and face dimensions. Before you order anything, measure the failed unit. Thickness is usually the deciding spec: a 2 3/8-inch paver will not sit flush with a 60-mm course, and a face profile that is off by a quarter inch will not lock into the existing field.
Identifying the product starts with what you can see and touch. Pull a loose unit, measure thickness and face dimensions with a tape, photograph the top and a side profile, and note the color name if the original paperwork is still around. A matching color batch is the hard part, since dye lots shift from year to year. On the OEM-versus-aftermarket call, we source the closest documented match from a manufacturer spec sheet and tell you up front when an exact color or profile match is not available, so you can decide before you spend. Bradford Remodeling Boulder City is an independent service provider and is not affiliated with Barrette.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Driveway & Pavers Is Failing
Paver and driveway failures show up in a handful of predictable ways, and each one points to a specific cause worth knowing before you price a fix:
- A paver rocks underfoot or sounds hollow. That means bedding sand has washed out or the base never compacted to spec, so the unit is sitting on a void instead of a solid surface.
- Joint sand washes out after storms. Boulder City’s short, intense rain events push sand out of joints that lack a proper edge restraint, and once the sand goes, the pavers start to shift.
- Corner heave or a lifted section at the apron. Our desert swings from hot days to cold nights, and when water gets under a paver and freezes, it lifts the unit. A lifted corner usually means drainage is failing, not just the paver.
- Weeds pushing through joints. Weeds root in the sand and base course, and their presence tells you the joint sand layer has broken down and needs re-sanding with a stabilized joint sand.
- Sunken dips or rutting in the driveway. Subgrade that was not prepped for our expansive soils settles over time, which shows up as low spots where water pools and the pavers dip.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here is what a Barrette-compatible driveway and paver job runs in Boulder City, part of a written price range we hold to:
| Scope | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing | $250 – $700 |
What drives the range: square footage, base depth required by your soil, how much of the existing field can be saved versus replaced, and whether the job needs an edge restraint or drainage correction. We quote parts and labor as separate line items, so you see exactly what a matched replacement unit costs and what the work to install it costs. Every completed job carries the 365-Day Done Right Promise: if the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely handle the inspection side. Photograph the damage, measure a loose paver’s thickness and face dimensions, and check whether the joint sand has washed out. That information tells you what you are dealing with and keeps a repair estimate honest.
Where DIY goes wrong is in the base. A replacement paver set on a bed of loose sand looks fine for a month, then rocks again once the first rain hits. Correcting that means pulling back the field to the subgrade, re-compacting to the right depth for our soil, and re-setting with proper edge restraint. Done wrong, it fails worse than the original. Call (844) 797-9259 and we will price the repair or the full replacement, whichever your driveway actually needs.
FAQs

The paver itself will hold up for decades; the real lifespan question is the base and joint sand under it. In our heat and freeze-thaw swings, joint sand and edge restraint typically wear first, so expect re-sanding every few years and a base correction if settling has started.
Often yes, if the failure is isolated to a few units and the surrounding field is still stable. We pull the damaged piece, correct the bedding underneath, and reset a matching unit. If the base has failed across a wider area, patching just pushes the same problem a few feet down the driveway.
A single-unit repair is a short visit, usually under a couple of hours. A larger section or full driveway replacement runs several days depending on square footage and base work. We give you the written timeline before work starts.
We measure the failed unit, match its thickness and face profile to the manufacturer spec, and source from a documented supplier roster with stated color lines. We install Belgard and Unilock hardscape as well, so we can match or complement a Barrette field if an exact unit is no longer made.
If you have a Barrette hardscape problem in Boulder City, call (844) 797-9259 to schedule your free estimate. You’ll get a written, itemized price, a scope you can read, and the 365-Day Done Right Promise standing behind the work. We also handle related work with KraftMaid, Cambria, and Silestone materials, and a live person answers the phone any hour you call.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












