







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Boulder City Owner’s Guide
Bradford Remodeling Boulder City installs Jerith-compatible kitchen parts and full kitchen remodeling for Boulder City homeowners, with installed kitchen projects typically running $14,000 to $45,000 and single-part replacements priced as a written line item before any tool comes out. We don’t claim to stock Jerith parts or carry them on a truck; we identify the exact part your model needs, source it, and install it under the 365-Day Done Right Promise. Most Boulder City owners find us after a cabinet door stops latching, a drawer glide grinds, or a hinge pulls loose from the substrate, and the part they need has a Jerith part number that doesn’t match anything on a big-box shelf.
Which Jerith Models This Applies To

Jerith builds its kitchen hardware and component lines in families, and the compatibility trap is real: two parts that look identical at the hinge plate can differ by a millimeter in bore spacing or by the overlay offset they’re cut for. The identification path that works is the label first, the measurement second. Look inside the cabinet door for the manufacturer sticker (often on the inside face or the top edge of the door), the model or series code, and any part number stamped into the hinge arm or glide body. If the label is gone, measure the hinge cup bore (common sizes run 35mm and 26mm), the door overlay, and the drawer box height and depth to the nearest millimeter before you order anything.
On the OEM-versus-aftermarket question, Jerith-specific parts are the safe match when the part is structural to the cabinet system: hinges cut to the door’s boring pattern, glides matched to the drawer box, and any frame or panel component that has to align with the factory joinery. For non-structural pieces, a documented aftermarket equivalent from a name-brand line is often the better buy because the specs are published and the warranty is traceable. We work with KraftMaid, Cambria, and Silestone on the cabinetry and surface side and can cross-reference fit when a Jerith part is discontinued. Bradford Remodeling Boulder City is an independent service provider and is not affiliated with Jerith.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Kitchen Remodeling Is Failing
Symptoms in a Boulder City kitchen tend to show up in a predictable order, and each one points to a specific cause rather than general wear:
- Doors that won’t stay closed or won’t sit flush. The hinge has lost spring tension or the mounting screws have stripped out of the cabinet substrate, which is common in older particleboard boxes where moisture has softened the material around the screw holes.
- A grinding or catching drawer glide. The glide’s rollers have flat-spotted or the track has bent out of parallel, usually from years of overloading a drawer past its rated capacity.
- Sagging shelves or a cabinet bottom that bows. The shelf pin or the bottom panel has failed at the load point; in Boulder City’s dry climate, repeated seasonal expansion and contraction loosens the pin fit over time.
- Door hinges that squeak or feel loose at the cup. The cup screws have backed out or the hinge arm is bent, and continuing to use it widens the screw holes with every open and close.
- Visible rust, pitting, or discoloration on hardware. Plating has worn through, which happens faster near a sink or dishwasher where steam and splashes hit the hardware daily.
One symptom is worth flagging separately: if a cabinet has pulled away from the wall or a shelf has dropped suddenly, stop loading it and have it looked at. That’s a fastening failure, not a hardware swap, and it needs a proper assessment before anything else goes back in the cabinet.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Boulder City, here’s what the work actually prices at, as a written number before we start:
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range is driven by cabinet box condition, door style and finish, whether the substrate needs repair before new hardware goes on, and the surface material you choose. Parts and labor are listed as separate line items so you can see what the part costs and what the install costs. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
Some checks are safe for any homeowner. You can tighten a visible hinge screw, confirm the model label inside the door, and measure the bore and overlay with a caliper. What goes wrong is the next step: re-boring a stripped screw hole without knowing the substrate depth, forcing a mismatched hinge into a cup that’s a millimeter off, or swapping a glide that changes the drawer’s alignment and binds against the frame. Those mistakes turn a $30 part into a cabinet door replacement. Kitchen cabinet hardware work isn’t in the same danger class as electrical or gas, but a cabinet that’s pulled from the wall is a load-bearing problem, and that’s a stop-and-call. When the part doesn’t match or the repair keeps failing, call (844) 797-9259 and we’ll give you a written price before any work starts.
FAQs

Built-in cabinet hardware generally runs 10 to 15 years of daily use before glides and hinge springs start to fail, and Boulder City’s dry climate and big seasonal temperature swings tend to shorten that on parts near a sink or exterior door where humidity varies most. If your hardware is past that window and one part has failed, expect its neighbors to follow within a season or two. Call (844) 797-9259 for an exact quote on replacing the whole set at once; estimates are free.
Sometimes, yes. A backed-out hinge screw can be filled and re-driven, a bent glide can occasionally be straightened, and a loose shelf pin can be re-seated with a larger pin if the panel hasn’t cracked. The repair makes sense when the part is structurally sound and the failure is fastening; it doesn’t make sense once the metal itself is bent, cracked, or rusted through, because it will fail again inside the year. We’ll tell you which one you’re looking at before quoting anything.
A single hinge or glide swap is a short visit, usually under an hour per part, and a full set across a kitchen is typically a half-day to a full day depending on how many doors and drawers are involved and whether the substrate needs repair first. We schedule the work and put the timeline in the written scope so there’s no guessing about how long the crew is in your kitchen.
We identify your exact model from the cabinet label and confirm it against bore, overlay, and drawer box measurements, then source the OEM part if it’s available or a documented name-brand equivalent with published specs if it isn’t. You get the part number and the price on the written quote before we order. Nothing gets installed that isn’t traceable to a manufacturer spec.
If a Jerith part in your kitchen is on its way out, don’t wait for it to fail mid-dinner-prep. Call Bradford Remodeling Boulder City at (844) 797-9259 for a free estimate. You’ll get a written price before any work starts, background-checked, uniformed technicians who show up when they say they will, a live person on the phone 24/7, and the full-year 365-Day Done Right Promise covering the work. The Garrison Standard means squared away from the first call to the final walkthrough, with the signed guarantee in your hand.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












