







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Roofing: The Boulder City Owner’s Guide
We install Belgard-compatible roofing and repair failing roof systems in Boulder City, and most roof repair and replacement work here runs $400 – $1,800 for repairs and $8,000 – $20,000 for a full replacement, with most repairs finished the same day. There’s a catch worth saying upfront: Belgard is a hardscape brand (pavers, retaining wall block, patio stone), not a roofing manufacturer, so “Belgard roofing” almost always means one of two things. Either a paver or block system has been used on a flat roof deck or patio cover and the material underneath is failing, or an owner has a Belgard-branded accessory tied into a roof edge – a coping piece, a paver-to-roof transition, a wall cap. Homeowners usually find the problem the same way: a stain on the ceiling after a monsoon, loose pavers rattling on a roof deck, or a hairline crack at the roof-to-wall joint that widens every summer.
Which Belgard Models This Applies To

Belgard doesn’t publish a roofing product line, so there’s no “Belgard model number” stamped on a roof part. What you’ll actually be identifying is the system the Belgard material sits in. Common setups in Boulder City:
- Belgard paver roof decks – usually a pedestal or mortar-set paver over a waterproof membrane on a flat or low-slope roof. The pavers themselves rarely fail; the membrane and pedestals under them do.
- Belgard retaining wall block used as a parapet or roof-edge cap – the block is sound, but the flashing detail where it meets the roof is the weak point.
- Belgard coping and caps on a patio cover or detached structure – the mortar joint under the cap cracks first.
To identify what you have, look for a stamp or label on the back or underside of any loose paver or block (Belgard marks most of its units), and measure the unit’s length, width, and thickness in millimeters. That measurement is what a supplier or contractor matches against. On a full replacement, the OEM-versus-aftermarket decision matters: Belgard’s own units match color and dimension exactly, while a generic paver that’s “close enough” often reads as a different color once the desert sun hits it. On a repair, matching the existing unit wins. On a full redo, any quality manufacturer’s paver will perform if the membrane and flashing are right – the paver is the wear surface, not the waterproofing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Roofing Is Failing
Boulder City’s swings from 110-degree summers to freezing winter nights stress roof systems hard. These are the five symptoms we see most:
- Ceiling stains or drip marks after rain. Water is getting past the membrane or flashing, not the pavers. The stain is the symptom; the breach is usually at a penetration or edge.
- Loose or rocking pavers on a roof deck. Pedestals have shifted or a mortar bed has cracked from thermal movement. A loose paver is a trip hazard and a sign the substrate is moving.
- Hairline cracks at the roof-to-wall joint. The flashing has separated from the wall as the two materials expand at different rates. This is the single most common leak path we find here.
- Cracked mortar under a Belgard cap or coping. UV and heat cycles dry out and shrink mortar joints. Left alone, the cap lifts and water gets under it.
- Granule loss or bald spots on a shingle roof beneath a paver system. If a paver deck sits over an older roof, the roof underneath is still aging and still needs inspection.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Pricing for this work in Boulder City, given as installed ranges – the number you see is the number you pay, in writing, before any work starts:
| Scope | Typical Installed Price |
|---|---|
| Roof repair (flashing, membrane patch, joint reseal) | $400 – $1,800 |
| Tile or paver roof section repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
What drives the range: roof size and pitch, how much of the existing material can be salvaged, whether flashing details need to be rebuilt from scratch, and whether the underlying membrane is sound or fully failed. A repair that’s just a reseal and flash sits at the low end; a full tear-off with new membrane and re-set paver units sits at the high end. Parts and labor are quoted separately so you can see what you’re paying for. Every completed repair or replacement is covered by the 365-Day Done Right Promise – if the work fails within a full year, we come back and correct it at no charge. We supply Belgard-compatible materials and work alongside KraftMaid, Cambria, and Silestone on whole-home projects when a roofing repair is part of a larger remodel.
DIY or Call Us?
There’s a safe list and a not-safe list. You can walk your roof from the ground and note where stains, loose pavers, or cracked joints are. You can check your attic for water intrusion after a rain. What you should not do is climb onto a pitched roof or a low-slope deck to lift pavers, probe a membrane, or reseal flashing yourself. Roof work at height is dangerous, and the most common DIY failure we see is a homeowner sealing a flashing joint that was never the actual leak – the water finds the real breach a week later, usually into a ceiling. Membrane and flashing repairs need a trained professional. Call us at (844) 797-9259 for a free estimate and a straight answer on whether you have a repair or a replacement on your hands.
FAQs

The Belgard paver or block units themselves can last decades, but the roof system under them – membrane and flashing – is what determines lifespan, typically 15 to 25 years depending on material and sun exposure. When the membrane fails, the visible material is fine but the roof is not.
Yes, in most cases. Localized flashing failures, cracked joints, and single leaking sections can be repaired at the $400 – $1,800 level. If the membrane is failed across the whole roof, replacement is the honest answer. Call (844) 797-9259 for a free inspection that tells you which you’re facing.
A repair is usually a single visit, often the same day. A full roof replacement on a typical Boulder City home runs several days depending on square footage and weather. You’ll get a written timeline before we start – no surprise timelines at the door.
We match Belgard-compatible units by measured dimension and color, or specify a quality equivalent with the same spec if a match isn’t available locally. Bradford Remodeling is an independent service provider – we’re not affiliated with Belgard – so we source what fits your roof and tell you in writing exactly what’s going in.
We keep every job squared away: a written price before any work starts, background-checked technicians, live phone coverage around the clock, and a signed 365-Day Done Right Promise in your hand at close. If a Belgard-based roof in Boulder City is giving you trouble, call (844) 797-9259 for a free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












