







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Boulder City Owner’s Guide
We install Unilock driveway and paver systems in Boulder City, and a full paver driveway typically runs $7,000 – $18,000 installed; individual pavers, edging and joint sand are matched to your existing Unilock profile rather than guessed at. Unlike a broken garage spring, a failing paver driveway isn’t an emergency, so we schedule installs on a planned basis after a free on-site measure. Most owners discover the problem slowly: a paver that rocks underfoot when the sprinkler runs, sand washing out of the joints after a monsoon, or a slight dip where the car parks every night. By the time the pattern looks crooked from the street, the base underneath has usually been moving for a season or two. We’re an independent contractor and not affiliated with Unilock, so we source genuine Unilock-compatible product where the profile is still current and match it precisely when it isn’t.
Which Unilock Models This Applies To

Unilock’s driveway and paver lines cover a few distinct families, and each one has a different replacement story. The Brussels Block and Brussels Dimensional lines are the tumbled, older-world look common on Boulder City ranch and mid-century homes; they come in standard 60mm and 80mm thickness, and the 80mm is the one you want under a vehicle. Copthorne and Beacon Hill are the more formal, straight-edged profiles seen on newer builds. Lineo and Umbriano are large-format slab pavers, usually 24×24 or similar, and they’re the trickiest to match because the face texture and color lot shift between production runs.
To identify what you have, pull one loose paver and check three things: the thickness in millimeters, the exact face dimensions in inches, and the color name stamped on the carton if you still have one from the original install. That thickness number is the compatibility gotcha most homeowners miss. A 60mm paver will not sit flush against a bed of 80mm pavers without a hard visible step, and layering sand to hide it just gives you a rocking stone six months later. On OEM versus aftermarket: genuine Unilock pavers carry the manufacturer’s dimensional tolerance and color-lot consistency, and for a visible driveway that matters. Quality aftermarket equivalents exist and can work for a small repair patch, but be honest about color drift. If the repair is in the middle of a sun-exposed Boulder City driveway, a slightly different lot will read as a patch from twenty feet away.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
These are the symptoms we see most often, and each one points at a specific cause rather than “the pavers went bad.”
- Pavers rocking or shifting underfoot. The bedding sand has washed out or the base wasn’t compacted to depth. Once a paver rocks, its edge grinds against its neighbors and the joint widens.
- Joint sand disappearing after rain. Polymeric sand breaks down faster in intense UV and heat cycling, and Boulder City gets both. Once joints are open, water gets straight to the base.
- Dips or ruts where tires sit. Usually a base failure, not a paver failure. A driveway base needs proper depth and compaction; a shallow base under a heavy vehicle will rut in one or two summers.
- Efflorescence, the white chalky haze. Mineral salts migrating to the surface, common with the area’s hard water and irrigation overspray. It’s cosmetic, but it signals water sitting where it shouldn’t.
- Edging lifting or pulling away at the perimeter. The edge restraint has lost its spikes or the soil behind it has eroded. Without solid edging, the whole field spreads outward over time.
One local reality worth naming: Boulder City’s caliche-heavy soil and intense summer heat stress a paver base differently than a coastal climate. A base that would hold for twenty years in a mild market can move in half that here if drainage isn’t handled.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Boulder City, a full Unilock-compatible paver driveway install runs $7,000 – $18,000. A smaller repair patch or a partial reset of a failed section typically lands well under the low end, and we quote it as a written line item before anyone touches the driveway. Compare that to a concrete driveway at $4,500 – $12,000 or asphalt at $3,500 – $9,000 if you’re weighing a full replacement instead of a repair.
What drives the range: total square footage, whether the existing base can be salvaged or has to be excavated and rebuilt, and the paver profile. Large-format lines like Umbriano cost more per square foot than a standard Brussels Block. Every quote separates product, base prep, and labor, so you can see where the money goes. And if the work fails inside the 365-Day Done Right Promise window, we come back and correct it at no charge – that’s a full year of written coverage on the install.
DIY or Call Us?
Some things you can check safely on your own. Walk the driveway and mark rocking pavers with chalk. Hose a section down and watch where water pools instead of draining. Look at the edging and see if it’s still tight against the field. Those observations help us quote accurately and save you the diagnostic visit.
Where DIY goes wrong: resetting pavers without rebuilding the base underneath. A homeowner can pull up a rocking paver, add sand, and set it back. It’ll feel solid for a few weeks, then move again because the actual problem – a failed or shallow base – never got addressed. Rebuilding base is excavation, compaction in lifts, and proper edging, and that’s where the work lives. If a repair patch is small and the base is sound, we’ll tell you so honestly. Call (844) 797-9259 and we’ll give you a straight read on whether you need a full reinstall or just a targeted fix.
FAQs

A properly installed Unilock paver system holds for decades – the pavers themselves are highly UV and freeze-thaw resistant. The failure point is almost never the paver; it’s the base and the joint sand. In Boulder City’s heat and caliche soil, expect to refresh polymeric joint sand every few years to keep the system tight. Call (844) 797-9259 for a free assessment of your current driveway.
Yes, often. If the failure is localized – a rutted patch, a section with washed-out base, or loose perimeter edging – a targeted repair is far cheaper than a full replacement. A full replacement makes sense when the base has failed across the whole field or the original install was too shallow for vehicles. We’ll tell you which you actually need, with a written price either way.
A localized repair patch is typically a day or two of work, while a full driveway replacement generally runs several days depending on square footage and whether excavation is required. We schedule on a planned basis, not same-day, because base prep and curing can’t be rushed. Your written quote includes the projected timeline up front.
We source genuine Unilock product where your profile and color lot are still in production, and match existing pavers precisely when they aren’t. We don’t claim to keep parts on a truck – product is ordered to spec for your job. If an exact color match isn’t available, we’ll show you the closest options and where the repair will sit before you commit. Call (844) 797-9259 for a free estimate.
We also install and match KraftMaid, Cambria and Silestone materials on interior projects, but driveway and paver work is where this guide lives. If you’re ready to get your Boulder City driveway squared away, call (844) 797-9259 for a free estimate. You’ll get a written price before any work starts, the 365-Day Done Right Promise on the finished job, and a live person on the line when you call.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












