A Bradford company - serving Boulder City, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Cambridge Pavers · Boulder City

Cambridge Pavers Kitchen Remodeling in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambridge Pavers Kitchen Remodeling: The Boulder City Owner’s Guide

Kitchen remodeling for a Cambridge Pavers-finish home in Boulder City typically runs $14,000 – $45,000 installed, with cabinet work at $4,000 – $13,000 and countertops at $2,000 – $6,500. Every project gets a written price before work starts, and the finished job carries our 365-Day Done Right Promise. Cambridge Pavers describes a family of hardscape and surface products, and when we install a kitchen we match those finishes, edges, and tolerances so the room reads as one material system rather than a patchwork. Owners usually realize something is off when a finish film starts lifting at the cabinet reveals, grout lines open up along a paver-topped island, or a surface edge chips where the counter meets the sink cutout.

Call (844) 797-9259

Which Cambridge Pavers Models This Applies To

Cambridge Pavers products are identified by series and finish, not by a single part number stamped on the back, so we always confirm what you have before quoting anything. Look for the product label on the original carton or pallet paperwork, then measure the actual face dimensions, thickness, and edge profile with a tape; those three numbers tell us which series you’re working with and which matching trim pieces will align with it. Spec ranges differ between series. A paving-stone face set into a countertop overlay runs roughly 1.5 to 2.4 inches thick depending on the line, while a patio slab used as an island top is often closer to 2.4 inches, and edge profiles vary from a simple square to a chipped or tumbled face that changes how a backsplash transitions. Mixing series is the compatibility gotcha we see most: two products that look identical in a showroom can differ in thickness by a quarter inch, and that gap shows up at every cabinet seam. On the OEM-versus-aftermarket question, Cambridge Pavers-original trim pieces cost more but keep the reveal lines and surface texture consistent. A quality aftermarket equivalent can work for hidden applications, but it’s a real trade-off in anything the eye lands on daily. Bradford Remodeling Boulder City is an independent service provider and isn’t affiliated with Cambridge Pavers.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambridge Pavers Kitchen Remodeling Is Failing

These are the failures we hear described on the phone, with the cause behind each one.

  • Finish film lifting near cabinet reveals. Adhesive or sealer breakdown from heat cycling at the range or dishwasher, which expands and contracts a surface set into a tight wood frame. Left alone, the edge lifts further and starts catching on towels and fingers.
  • Grout lines opening between surface sections. Typical of a joint laid without enough flex allowance, common in a kitchen where a dishwasher or oven pumps warm air through a fixed joint and the substrate moves underneath it.
  • Chipped edges at the sink or range cutout. Usually the product was cut without the right blade or the cut edge was left unsealed, so moisture and thermal shock work on an exposed corner. Chips at a cutout get worse because that edge takes every impact.
  • Rocking or hollow sound underfoot or under hand. A substrate problem, not a product problem: the surface is bridging a gap in the board beneath it, and weight or impact is the thing that finally cracks it. This one needs the substrate addressed, not just the top layer.
  • Color fading or dulling in Boulder City sun exposure. Southern Nevada’s UV load and dry heat are hard on unsealed surfaces, and finishes that weren’t sealed for this climate show it within a few seasons, especially near a window that gets afternoon sun.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers leveling a new base cabinet during a kitchen remodel

Here are the installed ranges we quote on Cambridge Pavers-matched kitchen work in Boulder City. These are real numbers from written estimates, not a “call for pricing” placeholder.

Scope Installed range
Full kitchen remodel (Cambridge Pavers-matched finishes) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

The range moves on square footage, cabinet layout changes, and whether plumbing or electrical rough-in has to move. You get a line-item written price before any work starts, parts and labor broken out, with no change orders at the door. Every completed job carries the 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge. We also work with KraftMaid, Cambria, and Silestone when a project calls for cabinetry or stone surfaces alongside the Cambridge Pavers work.

DIY or Call Us?

What you can safely do: pull the product label, measure the face dimensions and thickness, take photos of the failed joint or chip, and check whether anything underneath feels hollow. What goes wrong with DIY: cutting and seating a surface that has to line up with cabinet reveals and backsplash transitions is a tolerance game measured in sixteenths of an inch, and a bad cut shows immediately and can’t be patched invisibly. Cutting any stone or concrete-based surface also means silica dust, which needs proper respiratory protection and wet-cutting, not a shop vac in a closed kitchen. Moving a surface section or a cabinet run alone risks a back injury and a cracked piece at the same time. Our technicians have up to 22 years of experience, and they work background-checked and uniformed. Call (844) 797-9259 to schedule your free estimate and get the price in writing.

FAQs

A low-threshold walk-in shower with a bench and grab bar

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelvesA wood double vanity with two mirrors after a bathroom remodelAn open living space after a whole-home remodelA finished backyard cottage with a small covered porch

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch