







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Windows & Doors: The Boulder City Owner’s Guide
We install Dvele-compatible windows and doors in Boulder City, and most full window replacement projects here run $4,500 – $15,000 installed, with impact-rated units landing in the $8,000 – $25,000 range. A single failed sash, hinge set, or weatherstrip can usually be corrected without touching the whole opening. Most Boulder City owners find out something is wrong the same way: a window that won’t latch flush in July, a door that drags on the threshold by August, or a fine dust line on the sill after a spring wind event.
We’re an independent remodeling contractor, not affiliated with Dvele. That matters for how we source and price parts, and we’ll explain it plainly below.
Key Takeaways
- Dvele windows and doors are built to tight tolerances, so parts must be matched to the exact series, not just the opening size.
- Boulder City’s desert swing, alkaline dust, and hard summer UV shorten weatherstrip and seal life compared to coastal markets.
- Full window replacement: $4,500 – $15,000. Impact-rated: $8,000 – $25,000. Written price before work starts, always.
- Every completed job carries the 365-Day Done Right Promise: if the work fails inside a year, we return and correct it at no charge.
Which Dvele Models This Applies To

Dvele builds its windows and doors as part of a prefab wall system, which is the single biggest compatibility gotcha. The window isn’t a generic unit dropped into a framed rough opening; it’s engineered to a specific wall assembly with a defined rough opening dimension and a nailing flange or mounting detail that matches the panel. That means the part number on the unit’s label, not the tape measure alone, is what we match to.
How to identify yours: pull the manufacturer label from the head jamb (the top of the window frame) or the hinge edge of the door slab. You’ll find a series designation, a unit size callout, and often a glass package code. Photograph it before anything gets removed. If the label is faded, we take three measurements, width, height, and depth of the frame, and match that against Dvele’s documented series specs.
The OEM-versus-aftermarket call for Dvele is real. OEM parts guarantee the fit and keep the manufacturer’s glass warranty intact. Quality aftermarket equivalents for weatherstrip, hinges, and hardware can cost less and perform fine, but only when the dimensions match the series precisely. Our technicians have up to 22 years of experience reading these labels and making that call honestly. We also service KraftMaid, Cambria, and Silestone products elsewhere in the home, though this page is about windows and doors.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Windows & Doors Is Failing
- Drafts at the sash or door edge in cooler months. Failed weatherstrip or a compressed seal, common in Boulder City after a full summer of 100-degree-plus days baking the gasket.
- Condensation between the glass panes. A broken seal in the insulated glass unit. The unit has to be replaced; there’s no repair for this one.
- A door that drags or won’t latch flush. Hinge wear, a shifted strike plate, or a slab that’s swelling from heat cycling. Left alone, the latch failure usually follows.
- Visible dust tracks on the sill or frame corners after a wind event. The frame’s weather seal has opened up. In Boulder City, wind-driven alkaline dust finds every gap.
- Stiff or grinding operation on the crank or slide. Worn hardware, dried lubricant, or a bent operator arm. Small part, but it stresses the whole sash if it goes.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Boulder City, with parts and labor broken out in the written quote:
| Scope | Installed Price Range |
|---|---|
| Single window or door part replacement (weatherstrip, hinge set, hardware) | $180 – $650 |
| Insulated glass unit replacement (single) | $350 – $900 |
| Full window replacement | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
The range depends on unit count, series matching, glass package, and whether the wall opening needs any adjustment to accept the new unit cleanly. You get a written price before any work starts, with parts and labor listed separately. Every completed job carries the 365-Day Done Right Promise, a full-year written guarantee. If the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
Here’s the honest split. You can safely check the label, measure the opening, photograph the failing part, and clean and lubricate door hinges or window tracks. That’s it. Where DIY goes wrong with Dvele units specifically is forcing a mismatched part into an engineered opening, or prying at a frame that’s tied to a prefab wall panel. A cracked glass unit or a forced hinge point can turn a $300 fix into a full unit replacement.
The one real safety note: if any part of the work involves lifting a sash, setting a full unit, or reaching a second-story opening, that’s a two-person job with proper equipment, not a ladder-and-a-friend afternoon. Call (844) 797-9259 and give us the label photo and model. We’ll tell you straight whether it’s a part swap or a replacement, and what it costs.
A live person answers our phone 24/7. Background-checked, uniformed technicians get sent to every job, and you know who’s arriving before the crew pulls up.
FAQs

Expect 15 to 25 years on the frame and glass, but 5 to 8 years on weatherstrip and seals in Boulder City’s climate. The sun exposure and wind-blown dust here wear gaskets faster than in milder markets, so the seals usually need attention well before the unit itself fails.
Yes for weatherstrip, hinges, hardware, and operators, which are all replaceable and often cheaper to fix than to swap the whole unit. No for a failed insulated glass unit with condensation between the panes, or a cracked frame, which must be replaced. Call (844) 797-9259 with your label photo and we’ll give you a straight answer and a written price.
A single part replacement is usually a one-visit job, often under two hours. A full window or door unit replacement typically runs two to four hours per opening, and a whole-home set of units is scheduled across multiple days. We give you the timeline in writing with the quote, before any work starts.
We match the part to your unit’s label data, the series designation and size callout, not to the opening measurement alone. That’s because Dvele units are built to the wall panel’s specs, and a near-fit part will cause problems later. Where a quality aftermarket equivalent fits the series, we’ll say so and price it. Where it won’t, we go OEM. Either way, the price is in writing before the work starts.
Bradford Remodeling Boulder City is part of the Garrison Partners family, established in 2004, and operates as an independently owned and operated business held to The Garrison Standard. That means a live person on the line, a written price before any work begins, and a full-year guarantee on every completed job. Dvele windows and doors are the focus here, and we bring the same discipline to every opening we touch.
If you’re in Boulder City with a Dvele window or door that’s failing, call (844) 797-9259 for a free estimate. We’ll read your label, give you a written price range, and schedule the work around your calendar, not ours.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












