







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Roofing: The Boulder City Owner’s Guide
We install and repair ActiveYards-compatible roofing on pergolas, pavilions, and covered structures across Boulder City, and the typical installed cost runs $8,000 – $20,000 for a full roof replacement on a standard residential structure. A targeted repair is far cheaper at $400 – $1,800. We give you a written price before any work starts, every time.
Owners usually don’t notice the roof panel itself until something under it goes wrong. What brings the call is water dripping onto the patio slab, a panel that’s lifted or flapping in a windstorm off the McCullough Range, or a fastener head that’s rusted through and stopped holding. In Boulder City, UV exposure and summer heat punish sun-facing panels faster than anything else on the structure, so the first clue is often a chalky, faded panel top or a screw that spins loose instead of biting.
Key Takeaways:
- Full roofing replacement on an ActiveYards structure: $8,000 – $20,000 installed.
- Targeted repair: $400 – $1,800, depending on panel count and fastener condition.
- Written price before work begins. 365-Day Done Right Promise on the finished job.
Which ActiveYards Models This Applies To

ActiveYards builds a range of shade and shelter structures, and the roofing system differs by series. The panels, purlins (the horizontal bars the panels fasten to), and fasteners aren’t interchangeable across every line, which is the single most common compatibility gotcha we see. A panel that looks identical on the shelf can have a different rib profile or fastener spacing and will not seat correctly.
Here’s how to identify what you actually have before ordering anything:
- Check the label. Most ActiveYards structures carry a model or series tag on a post or beam near a corner. Photograph it; it saves a return trip.
- Measure the panel, not the opening. Panel width and rib spacing determine the replacement. Measure center-to-center on the ribs, not edge-to-edge.
- Count the fasteners per panel. This tells us the purlin layout and whether the original spec was a high-wind tie-down.
On the OEM-versus-aftermarket question: for a structure still under its manufacturer warranty, an OEM-matched panel is the safer route so you don’t void coverage. For older structures out of warranty, a quality aftermarket panel in the right gauge and profile performs well and often costs less. We’re an independent service provider, not affiliated with ActiveYards, so we’ll tell you plainly which way makes sense for your structure and why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Roofing Is Failing
Roof panels rarely fail all at once. They give you warnings. Here’s what each symptom usually points to:
- Rust streaks or bubbled paint at fasteners. Moisture is getting past a compromised screw or seal. Left alone, the fastener hole enlarges and the panel loses grip.
- Panels flapping or lifting in wind. The fasteners have backed out or the purlin has sagged. This is a wind-uplift problem, and it gets worse fast in Boulder City’s gusty afternoons.
- Water dripping between panels or at seams. The overlap or seal has failed, or panels have shifted out of alignment. Often a fastener or lap issue, not a bad panel.
- Chalky, faded panel surface. UV breakdown of the panel coating. The panel is losing its protective layer and will start to crack or craze at the edges.
- Sagging between purlins. Usually an undersized panel for the span or a purlin that’s failed. This one is structural and worth a look before the next wind event.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Boulder City, a full roof replacement on an ActiveYards structure runs $8,000 – $20,000 installed. A targeted repair lands at $400 – $1,800. The range is driven by structure size, panel count and profile, fastener condition, and whether the purlins need attention underneath.
What moves you up or down the range:
- Number of panels and total square footage.
- OEM-matched versus aftermarket panel selection.
- Condition of purlins and fasteners (a repair versus a replacement decision).
- Access and height, which affects labor.
Every job gets a written price before any work starts, with the parts and labor broken out so you see where the money goes. No numbers that move at the door. The finished work carries our 365-Day Done Right Promise: if it doesn’t hold within a full year, we come back and correct it at no charge. Call (844) 797-9259 to schedule your free estimate.
DIY or Call Us?
Some of this is safe to check yourself. Some isn’t. Here’s the honest split.
What you can safely do: inspect the structure from the ground, photograph the model label, measure rib spacing on a panel, and note which fasteners look rusted or backed out. That information alone helps us quote accurately.
Where DIY goes wrong: replacing panels and fasteners up on a structure means working at height, and a failed fastener or a panel that lifts in a gust can put you on the ground. Wind uplift and rusted fasteners are exactly the conditions that make a structure unsafe to climb on until it’s been assessed. This is height work, and it’s the kind of job where a fall is the real risk. We’d rather you leave it to technicians with the right tie-off and the right fasteners. Our technicians have up to 22 years of experience, are background-checked, and arrive uniformed so you know who’s on your property. Call (844) 797-9259 for a free estimate and let’s get it squared away.
FAQs

How long does ActiveYards roofing last in Boulder City? A well-installed panel system typically lasts 15 – 20 years here, but sun-facing panels on a south or west exposure in Boulder City’s climate often show UV fade and coating breakdown closer to 10 – 12 years. Fasteners usually fail before the panels do. Call (844) 797-9259 for an exact quote on your structure.
Can the roof be repaired instead of replaced? Often yes. If only a few fasteners or one or two panels have failed and the purlins are sound, a targeted repair at $400 – $1,800 is the right call. We’ll tell you when a repair is throwing money at a structure that’s ready for replacement. Estimates are free.
How long does the swap take? A targeted repair is typically a single-day job. A full roof replacement on a standard residential structure usually takes one to three days depending on size and access. You’ll get the schedule in writing before we start.
How do you source the part? We match your panel by model label or by rib spacing and gauge, then source OEM-matched panels where warranty coverage matters or a quality aftermarket equivalent where it doesn’t. We’ll tell you which we’re using and why before you commit. Call (844) 797-9259 to get started.
When it’s finished, you’ll have a clean site, a documented scope, and your written guarantee in hand. That’s what squared away looks like.
We also install and service KraftMaid, Cambria, and Silestone products for Boulder City homeowners. Call Bradford Remodeling Boulder City at (844) 797-9259 to schedule your free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












