







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Driveway & Pavers: The Boulder City Owner’s Guide
If you own an Ameristar driveway or paver system in Boulder City, we install compatible parts and complete replacements, with paver driveway projects typically running $7,000 – $18,000 installed and paver patios $3,500 – $11,000. We do not promise same-day turnarounds on a full driveway – a proper base build takes days, not hours – but we give you a written price before any work starts, and you’ll know the scope before a single tool comes out. Most Boulder City owners discover a failing system the same way: a paver lifts after a hard freeze, sand washes out along the edge, or a rut appears where the base never compacted right. That first loose unit is the signal to inspect the whole field.
Which Ameristar Systems This Applies To
Ameristar paver systems have shifted fastener, edge-restraint, and unit-thickness specs across their product generations, and the profile that fits one series won’t seat on another. Before we order anything, we identify your system three ways: the original install documentation if you have it, the paver dimensions and interlock pattern measured in the field, and the edge-restraint and bedding detail exposed at a lifted unit. That trio tells us which Ameristar generation you’re matching. On OEM versus aftermarket for Ameristar specifically: factory-original units protect an exact color and texture match, while quality aftermarket pavers that meet the same thickness and compressive spec can run 15 – 25% less and often blend well enough that the seam disappears within a season. We quote both, side by side, in writing. We’re an independent Boulder City service provider and are not affiliated with Ameristar. We don’t stock parts or carry them on a truck; we source per project. We also work with KraftMaid, Cambria, and Silestone on interior projects.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Driveway or Pavers Are Failing
- Individual pavers rock or lift underfoot. The bedding sand beneath has migrated or the base layer wasn’t compacted to depth. Lifting units usually trace back to a base thinner than the 4 – 6 inches a Boulder City driveway needs.
- Polymeric sand washes out along the edges and joints. Our desert swings between hard sun and occasional freeze events, and that cycle opens joints. Once the sand goes, water gets under the field and the failure accelerates.
- Rutting or depressions in the drive path. This is almost always a sub-base problem, not a surface one. Adding pavers on top hides it for a season and then the rut returns.
- Edge units creeping outward. Edge restraint has failed or was under-set. Left alone, the whole field spreads and the interlock pattern opens up.
- Color fading or efflorescence haze. Sun exposure and mineral salts surfacing. Cosmetic early on, but it signals the sealer has worn off and the units are unprotected.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what paver work runs in Boulder City, installed:
- Paver driveway installation: $7,000 – $18,000
- Paver patio installation: $3,500 – $11,000
- Concrete driveway installation (comparison): $4,500 – $12,000
- Driveway replacement: $5,000 – $14,000
- Driveway sealing: $250 – $700
What moves the range: total square footage, base excavation depth, whether the old surface comes out, and whether you’re matching an existing Ameristar field or replacing all of it. Your written quote breaks out parts cost and labor separately so nothing hides. Every completed project carries the 365-Day Done Right Promise – if the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely reseal a sound driveway, re-sand open joints with polymeric sand, and measure your paver thickness and pattern to identify your Ameristar series. Where DIY goes wrong is the base. A Boulder City driveway that fails almost always failed at the sub-base, and no amount of surface patching fixes a base that wasn’t excavated and compacted to depth. Tearing out and rebuilding a paver field properly needs plate compaction, a graded base, and edge restraint set right – that’s the work we do. Call (844) 797-9259 to schedule your free estimate; a live person answers, and there’s no pressure on the number.
FAQs

How long do Ameristar pavers last in Boulder City? A properly built paver driveway lasts 25 – 30 years or more here; the pavers themselves rarely fail – the base and joint sand fail first. Resealing every 2 – 3 years is what protects the investment.
Can failing pavers be repaired instead of replaced? Yes, often. Lifted or rocked units can be reset with a corrected base and fresh bedding, and localized repairs are far cheaper than a full rebuild when the failure is contained. Call (844) 797-9259 for a free look – we’ll tell you honestly which one you need.
How long does a paver swap or repair take? A localized repair or reseal is usually one to two days; a full driveway replacement runs three to five days depending on square footage and how much base work is required. We put the timeline in writing up front.
How do you source the Ameristar part? We verify your system’s generation against measurements and exposed detail, then quote OEM and matching aftermarket options side by side. You get a written price before any work starts – call (844) 797-9259 for an exact quote, and estimates are free.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












