







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Windows & Doors: The Boulder City Owner’s Guide
We install and repair Atlas-compatible windows and doors in Boulder City, and most single window or door replacements here run $4,500 – $15,000 for a multi-unit project, or $450 – $1,200 per opening for a one-off swap; impact-rated units land at $8,000 – $25,000 for a full recommendation. We’re an independent service provider, not affiliated with Atlas, but our technicians have up to 22 years of experience matching Atlas series parts to the original frame and glass spec. Most owners find out something has failed the same way: a window that won’t latch, a door that drags on the sill in July, or fog between the panes that wasn’t there last summer.
Boulder City sits at roughly 2,500 feet with desert temperature swings that hit 40 degrees between afternoon and overnight in spring and fall. That cycle works vinyl and aluminum frames hard, and it’s why the hardware and weatherstripping on an Atlas unit usually give out before the glass does.
Which Atlas Models This Applies To

Atlas has built windows and doors under several lines over the years, and the part that fits one series rarely fits another. Single-hung and double-hung vinyl units use different balance assemblies and tilt-latch hardware than the slider line, and patio door rollers changed profile more than once. Before we quote anything, we identify the unit three ways: the certification label on the upper sash or door jamb, the visible glass stamp (which gives you the glazing spec and date), and measurements of the frame opening taken at three points, because a settled opening is rarely square.
The OEM-versus-aftermarket call matters with Atlas. For visible hardware like sash locks and handles, a quality aftermarket equivalent is often as good and cheaper. For balance springs, rollers, and weather seals, we match the original spec even when it costs a little more. A generic balance rated for a lighter sash will fail again inside a couple of seasons in Boulder City heat. We work with KraftMaid, Cambria, and Silestone on the interior side of these projects, and we hold window and door specs to the same documented standard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Windows or Doors Is Failing
These are the five calls we get most often in Boulder City, and what’s usually behind each one:
- The window won’t stay up. A worn or broken balance spring is the cause, not the sash itself. Once one balance goes, the other side is usually close behind.
- Fog or moisture between the panes. The insulated glass seal has failed and let in desert air. The frame is usually still sound; it’s the glass unit that needs replacing.
- The door drags or won’t latch. Settling or a worn sill and hinge set, common on west-facing entries that take the full afternoon sun. Left alone, the drag wears the weather seal and lets in dust.
- Drafts and dust at the edges. The weatherstripping has dried and cracked. On an older Atlas unit in Boulder City, this is normal wear, not a defect.
- Condensation on the interior glass in winter. Often a failed seal combined with interior humidity, not a sign the window is leaking. We check the seal before recommending a full replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Boulder City, here’s what the work actually runs:
| Job | Installed Price Range |
|---|---|
| Single window replacement (one opening) | $450 – $1,200 |
| Window replacement, multi-unit | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Glass unit replacement (seal failure only) | $250 – $700 |
| Patio door roller and hardware service | $180 – $450 |
What moves you within a range: the number of openings, whether the frame is reused or replaced, impact versus standard glass, and whether the opening needs reframing. Every price is written before work starts. No number moves at the door. All completed work carries the 365-Day Done Right Promise: if it fails inside a full year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: run a finger along the weatherstripping to feel for cracks, test each latch by hand, and note whether the fog between panes is permanent or clears with weather. That information helps us quote accurately. Where DIY goes wrong is glass. Replacing an insulated glass unit means handling a sealed assembly that can weigh 60 pounds or more, and a dropped unit on a ladder is a real injury risk. Balance springs are under tension and can snap back hard. We don’t recommend either as a homeowner job. For anything beyond a latch or a sweep, call (844) 797-9259 and we’ll give you a written price first.
FAQs

How long should Atlas windows and doors last in Boulder City? A well-built Atlas unit typically gives 20 to 30 years on the frame, but hardware and seals wear faster here – figure on weatherstripping every 8 to 10 years and balances or rollers closer to 12 to 15 in full sun. Call (844) 797-9259 if you’re past those marks and noticing drafts.
Can the part be repaired instead of the whole window replaced? Often, yes. A failed glass seal, a worn balance, or a dragging door roller can usually be serviced without touching the frame. We check the repair option first and tell you plainly when it’s not worth it. Call for a free estimate and we’ll price both.
How long does a swap take? A single window or hardware service is typically a half-day. A full multi-unit window or door project in Boulder City usually runs one to three days depending on openings and whether reframing is needed, and we give you that timeline in writing before we start.
How do you source the right Atlas part? We read the certification label and glass stamp, measure the opening at three points, and match the balance, roller, or seal to the original Atlas series spec – not a generic fit. You’ll see the part spec and the written price before any work begins. Call (844) 797-9259 to get started.
When your Atlas window or door isn’t closing right, or the glass has fogged and you’re tired of guessing what fits, call Bradford Remodeling Boulder City at (844) 797-9259 for a free estimate. A live person answers, every time, and you’ll have a written price in hand before a single tool comes out.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












