







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Home Additions & ADU: The Boulder City Owner’s Guide
We build Barrette-compatible home additions and ADUs for Boulder City homeowners, and a typical finished addition runs $45,000 – $130,000 while a detached or attached ADU runs $90,000 – $220,000. Barrette’s engineered building materials – its framing, siding and trim systems – carry a known record and known limits, and knowing which Barrette component a failing addition depends on is the whole job. Most Boulder City owners discover the problem the same way: a hairline crack in a wall that reappears after every repair, a kitchenette wall that feels soft, or a set of plans that never closed out because the structural pieces weren’t matched to Barrette’s published specs.
Which Barrette Models This Applies To

Barrette makes dozens of building component lines, and each has its own dimensional and fastening standard. The two that matter most for a home addition or ADU are engineered framing members and exterior cladding systems. A Barrette-labeled beam or post has a print on the face listing the species, grade and span rating – read that print before anything else. Barrette siding and soffit panels are matched to a specific profile and thickness, and a panel that looks identical in a photograph usually isn’t.
Here’s the compatibility gotcha: Barrette span ratings are set for a defined loading condition, and the rating that fits a 30-foot Boulder City garage addition is not the rating that fits a 40-foot ADU with a second-story deck. Pulling the wrong rated member costs more than the part, because you’re reworking the frame around it. Also check the wind rating, not just the span: Barrette’s siding systems list one, and Boulder City’s gust exposure on a two-story ADU wall won’t accept a panel rated for a single-story garage.
On OEM versus aftermarket, the decision differs from a lot of brand parts you’ll research. Barrette aftermarket equivalents for siding and trim are common and often fine – they’re extruded to the same nominal profile. For engineered structural members, stick to a piece with the same rated print or don’t use it at all. There is no aftermarket substitute for a span rating.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Home Additions & ADU Is Failing
- Recurring hairline cracks over door and window corners. Usually a sign that a header or trimmer is undersized or deflecting. Barrette framing doesn’t craze unless the load is wrong or the fastener pattern was skipped.
- Siding panels oil-canning, buckling, or rattling in wind. A Barrette cladding panel installed without the manufacturer’s required clearance at the framing causes this. It’s a fastening and gap issue, not a defect in the panel.
- Soft or spongy drywall behind a kitchenette wall. Water is getting in where a wall-to-roof or wall-to-slab transition wasn’t flashed to Barrette’s detailing. The panel is likely fine; the detail wasn’t.
- Snow-load or wind uplift failure at a roof-to-wall junction. If a code inspector flagged an uplift tie method, the Barrette connector was set for interior conditions and won’t take the rated load.
- Sagging or deflection at a long clear span. A Barrette beam set at the wrong rated span for the load. This is the one that becomes structural, not cosmetic, and it’s the fastest reason to get a trained eye on it.
Replacement Cost & What’s Included

A Barrette component repair or rework on an existing addition starts around $2,500 for a scoped cladding and flashing correction, and a full structural reframe of an addition can run $8,000 – $25,000 depending on how many rated members are involved. A complete new addition in Boulder City runs $45,000 – $130,000, and a full ADU runs $90,000 – $220,000. Garret garage conversions sit between those at $30,000 – $80,000 when the existing shell takes a Barrette cladding and framing update.
What drives the range: span (a 16-foot span uses one rated member, a 30-foot span uses three or four), whether a foundation or slab needs to be extended, and whether the current frame passes inspection. What’s included in our written price: the specified Barrette component or matched equivalent, fasteners and connectors to spec, permits, and a pre-inspection sign-off. There is no number that moves at the door. Every project carries the 365-Day Done Right Promise – if a section of the work fails inside the first year, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely do a few things: read the Barrette print on a framing member, photograph the print and the panel profile, measure spans, and look for flashing gaps. What you should not do is swap a load-bearing Barrette member, re-flash a roof-to-wall junction on a second story, or refasten cladding at height. Those are the three where a homeowner gets hurt or makes a $4,000 problem into a $25,000 one. We’re a Barrette-independent service provider – not an authorized Barrette dealer or distributor – and we install the component to the manufacturer’s published spec, no shortcuts. Call (844) 797-9259 with a photo of the print and the span and we’ll tell you what type of repair you’re looking at before anything moves.
FAQs

How long should a Barrette addition or ADU last? A Barrette framed and clad extension properly installed in Boulder City’s dry, hot climate with 110-plus summer days should hold its form for decades – the walls and roof, not the cosmetics. The failure point is almost always flashing and fastener corrosion, not the Barrette material itself, and that’s why our detail work and 365-Day Done Right Promise both target the junctions.
Can the failing component be repaired instead of replaced? Often yes for cladding, trim and flashing – a properly lapped and sealed Barrette trim repair costs a fraction of a panel replacement. It’s rarely yes for a deflecting or cracked rated structural member, and no reputable contractor should tell you it is. Call (844) 797-9259 for a direct answer on which category your repair falls into.
How long does the swap take? A scoped repair on a Barrette cladding or trim section runs one to three days including inspection. A structural reframe of an addition runs one to three weeks depending on scope and permit turnaround. A full ADU or new addition is a months-long schedule, and we put the timeline in the written price before work begins.
How do you source the Barrette component? We identify the exact Barrette line from the print, profile or product label on the failing piece, then order to that spec through the manufacturer’s supply chain or a documented equivalent. You see the part number and the manufacturer name on the written price. For kitchen, surface and fixture components within the addition, we work with KraftMaid, Cambria, Silestone and other documented brands on the same basis. Call (844) 797-9259 for a free estimate.
Get the Barrette Repair Scoped in Boulder City
If a Barrette addition or ADU component in Boulder City has started to fail, the fastest path to a real number is a photo of the labeling and a call. We give you a written price before any work starts, a background-checked and uniformed crew on the day, permits pulled and inspections passed, and the 365-Day Done Right Promise signed in your hand at close. Our technicians bring up to 22 years of experience to the job, and a live person answers the phone 24 hours a day. Call Bradford Remodeling Boulder City at (844) 797-9259 to schedule your free estimate – the price range for a scoped repair starts around $2,500 and full scopes run $45,000 – $130,000 for everything from a single wall to a complete addition.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












