







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Bathroom Remodeling: The Boulder City Owner’s Guide
Belgard bathroom remodeling in Boulder City runs $9,000 to $28,000 installed, and it covers the waterproofing, substrate repair, tile, and fixture work that goes behind and around the Belgard surfaces. Belgard itself makes hardscape and paver products, not bathroom fixtures, so any “Belgard part” in a bathroom traces back to a tile, paver, or surface element set into the room. When it starts to fail, you’ll usually see it as a hollow sound underfoot, a hairline crack that spreads, or grout pulling away from a floor or shower edge within one winter.
We’re an independent service provider, not affiliated with Belgard, but we work with Belgard-spec materials and know how they behave in Boulder City’s dry heat and hard water.
Key Takeaways
- Installed bathroom remodeling with Belgard-type surfaces: $9,000 – $28,000 in Boulder City.
- Belgard is a hardscape brand; the “part” that fails in a bathroom is almost always tile, a paver element, or the substrate/waterproofing beneath it.
- We give a written price before any work starts, and every job carries the 365-Day Done Right Promise.
Which Belgard Models This Applies To

Belgard’s catalog is built around pavers, retaining walls, and hardscape slabs, with product lines like its textured paver series and slab products used indoors in some designs. In a bathroom, a Belgard-spec element is typically a paver-style floor, a decorative tile band, or a slab that’s been sealed and set over a proper substrate. To identify what you have, check the back of a loose tile or the edge of the floor run for a stamped series name, then measure the face dimensions. Matching a replacement means matching not just color but thickness and edge profile, because thickness drives your substrate and waterproofing schedule.
On Belgard-specified hardscape material, the OEM-vs-aftermarket decision matters less than it does on mechanical parts: the goal is a same-spec match on color, size, and finish. We can source a factory match or a quality equivalent, and we put the exact product and quantity in the written scope so what gets installed is traceable. If your bathroom includes cabinetry or a vanity top, we also work with KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Bathroom Remodeling Is Failing
- Hollow sound underfoot. A void has opened between tile or paver and the substrate, often from a thin-set or adhesive failure, and a hollow note means the bond is already gone.
- Hairline cracks that spread. Usually a sign of substrate flex or a missing movement joint, and in Boulder City’s heat cycling they widen within a season.
- Grout pulling away from edges. Typical at a shower pan or floor perimeter where waterproofing and grout have let go.
- Efflorescence or chalky film. Mineral salts pushed to the surface by moisture, common where hard water and a failing seal meet.
- Loose or lifted pavers or tile. A failed adhesive layer or an edge with no proper expansion gap; this is a substrate problem, not a surface one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Boulder City, a full bathroom remodel with Belgard-type surfaces runs $9,000 to $28,000. A smaller bathroom lands at $5,000 to $12,000, a walk-in shower install runs $4,500 to $12,000, a shower replacement $3,000 to $8,500, and a vanity install $800 to $3,000. The range is driven by room size, whether the substrate and waterproofing have to be rebuilt, surface selection, and fixture grade.
Every price we quote is written before work starts and includes the part, the labor, and the scope line by line. No number moves at the door. Finished work is covered by the 365-Day Done Right Promise: if it fails within the year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: tap for hollow spots, photograph cracks before they spread, and look at labels and measurements to name the product. Where DIY goes wrong is the part you can’t see. Setting tile or pavers correctly depends on substrate flatness, a proper waterproofing layer, and expansion joints; a surface that skips any of those fails fast in Boulder City’s climate. That’s a trained-trade job, and a botched layer means tearing it all back out.
Call (844) 797-9259 and a live person answers, day or night. Estimates are free, and you’ll have a written price before any tools come out.
FAQs

A properly installed tile or paver bathroom floor can last 20-plus years, but in Boulder City’s dry heat and hard water, a thin substrate or failed seal can shorten that to under a decade. The surface outlasts the waterproofing beneath it, which is why the layer you can’t see matters most. Call (844) 797-9259 for a free estimate.
Sometimes, yes. A single cracked tile, a regrout, or a reseal can be a repair if the substrate is sound. If tapping reveals hollow areas or the waterproofing has failed, repair is a patch over a bigger problem and we’ll tell you so. Call (844) 797-9259 to get a straight answer.
A surface-level replacement can finish in a few days, while a full bathroom remodel with substrate and waterproofing rebuild typically runs one to three weeks depending on room size. We put the schedule in the written scope so you know what to expect. Call (844) 797-9259 to schedule your free estimate.
We source a factory-spec match or a quality equivalent and list the exact product and quantity in the written scope before work begins. Belgard surface elements are matched on color, size, thickness, and edge profile so the finished room lines up. Call (844) 797-9259 and we’ll walk you through the options.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












