A Bradford company - serving Boulder City, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Boral · Boulder City

Boral Bathroom Remodeling in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
A remodeled family room with new windows and a window seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Bathroom Remodeling: The Boulder City Owner’s Guide

We install Boral bathroom remodeling systems in Boulder City for $9,000 – $28,000, and small bathroom layouts run $5,000 – $12,000. Boral makes cultured marble and solid-surface bath products – vanity tops, wall panels, shower surrounds – that are molded, not tiled, so the “part” you’re chasing is usually a molded panel, a top section, or the substrate behind it rather than a gasket or cartridge. Owners in Boulder City usually notice the failure the same way: a hairline crack spreads out from the drain collar, a seam yellows and starts to lift at the shower wall, or the caulk line won’t stay sealed no matter how many times it’s redone.

Call (844) 797-9259

Key Takeaways

  • Boral bath panels and vanity tops are molded units with a gelcoat surface. Damage is repaired or replaced, not patched with tile. Expect $9,000 – $28,000 for the full surround and vanity scope.
  • Boulder City’s dry, hot summer air and hard water are the two biggest killers of these surfaces. Let that guide what you check first.
  • We’re an independent contractor with a documented roster of brand materials. We’re not Boral, and Boral doesn’t warranty your installation – we do, in writing, for a full year.

Which Boral Models This Applies To

A tile setter installing wall tile in a shower

Boral’s bath line runs through several product families – molded vanity tops, shower and tub wall surrounds, and solid-surface sheet – and each one uses different panel dimensions, corner trims, and drain or valve cutout locations. That’s the compatibility trap: a replacement panel sized for one surround series won’t line up with the tile flange or the pre-cut valve hole of another. Before anyone orders a part, find the label. It’s usually on the back of the vanity top, inside the cabinet, or stamped on the underside of a shower pan, and it carries the model or series code. If there’s no label, measure the panel length, height, and the exact center-to-center distance between the drain and the wall, then write it down.

On a Boulder City job, the OEM-versus-aftermarket decision comes down to fit, not brand loyalty. An OEM Boral panel matches the existing profile and color lot exactly, which matters when you’re replacing one panel in a functioning surround and want the finish to match. A quality aftermarket solid-surface panel can match the dimensions and save money, but color drift between lots is real, and UV exposure here fades cheap gelcoat fast. If you’re replacing the whole surround and not one section, aftermarket earns its place. If you’re matching into existing Boral material, we push toward the OEM-compatible piece and say so up front.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Bathroom Remodeling Is Failing

  • Cracks radiating from the drain or valve collar. These form where the molded material was thinnest during casting, and stress from a flexing floor or a hard knock opens them up. Hairline cracks let water under the gelcoat.
  • Yellowing or chalky spots on the top surface. Sun through a bathroom window plus Boulder City’s low humidity and hard water combine to break down the surface finish over time. Once it chalks, cleaning just spreads it.
  • Caulk line that lifts at the wall-to-pan seam. This usually means the substrate sags or the joint has been mopping up water because the pan isn’t fully supported. Recaulking hides it for a season.
  • A spongy or bouncy feel when you step into the shower. That’s a soft or water-damaged substrate under the pan, not the pan itself. It’s the failure most likely to mean a rebuild rather than a part swap.
  • Loose or wobbly vanity top. Molded tops that rock mean the cabinet or the wall behind it has shifted. The top is fine; the mounting is not. This is one of the cheaper fixes on the list.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

Here’s what the real numbers look like for Boulder City, and these are the ranges we quote across the site – no different numbers at the door:

Scope Installed Range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What drives the number: whether the substrate is sound or needs replacement, whether the rough-in plumbing has to move, and whether you’re matching into existing Boral material or replacing the whole surround. Every price is written before work begins, line itemed for parts and labor, and backed by the 365-Day Done Right Promise. If the installation fails inside a year, we come back and correct it at no charge.

DIY or Call Us?

You can safely check a lot of this yourself. Look for the model label, measure the panel and drain dimensions, press on the shower floor to feel for soft spots, and run a fingernail along a crack to see if it catches. That information is genuinely useful and we want you to have it.

Where it goes wrong is the teardown. Pulling a molded surround off a wall means cutting through adhesive, freeing the drain connection, and getting at the substrate – and if the substrate is water-damaged or the pan wasn’t set on a proper mortar bed, a DIY swap goes in over a bad base and fails again within the year. A shower pan that isn’t fully supported flexes and cracks the new material. That’s the trap. If the floor feels soft or the crack has spread past the drain, that’s a rebuild, not a part. Call (844) 797-9259 and we’ll tell you straight which one you’re looking at. Estimates are free.

FAQs

An open kitchen and dining area after a remodel

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA remodeled staircase with wood treads and a slim metal railingA small remodeled galley kitchen with cabinets to the ceilingA finished basement family room with a media wall and wet bar

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch