







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Boulder City Owner’s Guide
We install Boral driveway and paver systems across Boulder City, and installed pricing usually lands between $7,000 and $18,000 for a driveway and $3,500 to $11,000 for a patio, depending on square footage, base prep, and pattern. Boral pavers are modular, so a failed section can be lifted, reset, and matched without tearing out the whole field. The job is scheduled, not same-day.
Most Boulder City owners find out something’s wrong the same way: a paver in the driveway rocks underfoot when they roll the trash bin out, or a hairline crack opens along the joint line after a summer of 100-degree afternoons. Then the sand starts washing out from between the units after a monsoon, and the pattern stops reading like it did when it went down.
Key Takeaways
- Boral pavers on a proven base run long; failures usually trace back to base compaction and joint sand, not the paver itself.
- Boulder City’s freeze-thaw nights and monsoon runoff test a driveway harder than most of the Southwest.
- Partial repairs and section resets are common and cost far less than a full replacement.
- Every project gets a written price before work starts and a 365-Day Done Right Promise on the labor.
Which Boral Models This Applies To

Boral’s paver and retaining-wall lines each carry their own profile, thickness, and color family, and the compatibility question matters most when you’re matching new units into an existing field. Boral pavers commonly run 2 3/8 inches thick for pedestrian and driveway duty, and 60mm or 80mm for heavier loads. Get the thickness wrong and the new unit sits proud or low against its neighbors, which reads as a tripping lip. The model name usually lives on the original project paperwork or a pallet wrapper; if neither survived, we measure thickness with a caliper at the edge of a lifted unit and match color family from there.
On the OEM side, Boral’s proprietary color blends are the reason to stay with the manufacturer’s own units when patching. A generic aftermarket paver can hit the same dimensions and still miss the blend, and once the sun hits a patched section in Boulder City the difference shows. We source from the manufacturer’s current catalog and confirm the batch before it leaves the yard. We’re an independent service provider, not affiliated with Boral.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
- Rocking units underfoot. A paver that tips when you step on its edge has lost base support, usually from a thin spot in the compacted aggregate or a settled utility trench. Left alone, the rocking grinds the bedding sand and spreads the problem to neighboring units.
- Sand washing out of the joints. Joint sand is what locks the field together. In Boulder City, where a single monsoon cell can drop an inch in an hour, an unsealed or underfilled joint lets water run through the field and erode the bedding layer underneath.
- Hairline cracks along a paver face. Cracking that runs through the unit, not the joint, points to a paver laid on an uneven bed or a base that flexed. Boral units are dense and handle heat well, so a cracked face is a base story, not a paver story.
- Heaving or dips at the driveway apron. A hump or hollow where the driveway meets the street usually means water is pooling and the subgrade is moving. This is the one failure that gets worse with every rain season.
- Efflorescence that keeps coming back. White mineral bloom that returns after cleaning traces to moisture moving through the slab from below. It’s cosmetic until it isn’t, and it’s the earliest sign the base isn’t draining.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Boral paver work runs in Boulder City, installed, with a written price before we touch the driveway:
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What drives the range: square footage, how much base has to come out and be recompacted, pattern complexity, and whether edge restraints and drainage need rebuilding. All pricing covers the pavers, bedding and joint sand, edge restraint, base prep, and labor. Repairs are quoted line by line so you see exactly what’s being reset. Every completed project carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
There’s real value in what an owner can check safely. Walk the driveway after a rain and note where water stands. Sweep joint sand and look for the low spots it disappears into. Pull a loose paver up by hand and see whether the bedding sand is still there or washed away. That much is fine.
Where DIY goes wrong is the base. Rebuilding a failed section means cutting out the old aggregate, recompacting in lifts, resetting the bedding sand, and matching the Boral blend so the patch doesn’t read as a patch. A base that’s undercompacted fails again within a season, and a wheelbarrow and a hand tamper won’t get there. A paver driveway that heaves is also a tripping hazard on the way to the car. Call (844) 797-9259 for a free estimate, and we’ll tell you straight whether it’s a repair or a replacement.
FAQs

A properly installed Boral paver field typically lasts decades. The pavers themselves hold up well to Boulder City’s heat and freeze-thaw nights; what fails first is the joint sand and, on a bad install, the base. Re-sanding and sealing every few years keeps a Boral driveway looking right well past its initial install.
Yes, in most cases. A localized failure, whether it’s four rocking units or a settled corner, is lifted, the base is corrected, and the pavers are reset and matched. Full replacement is only the answer when the base has failed across the whole field or drainage can’t be fixed in place. Call (844) 797-9259 and we’ll look before we quote.
A small section repair is usually a one-day job. A full driveway replacement runs several days because of base prep and compaction time, and we don’t rush that step. You get a written schedule with your written price before work begins.
We work from Boral’s current catalog, confirm the model and color blend, and match thickness to the existing field so the patch sits flush. We don’t carry stock and we don’t guess at a blend; the unit is sourced to spec and checked against your existing pavers before install.
We also handle KraftMaid, Cambria, and Silestone selections on the interior side when a driveway project turns into a bigger scope.
Call (844) 797-9259 for a free estimate. You’ll get a written price before any work starts, a live person answers the phone around the clock, and a background-checked crew shows up to a job that ends with a clean site and a signed 365-Day Done Right Promise in your hand.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












