







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Boulder City Owner’s Guide
We install Cambridge Pavers and Cambridge-compatible driveway and paver systems in Boulder City, and a full paver driveway typically runs $7,000 – $18,000 installed, with patio work at $3,500 – $11,000. We’re an independent contractor and not affiliated with Cambridge Pavers, but we work with their systems and spec-compatible alternatives often enough to know exactly how they fail here. Most Boulder City owners don’t notice a problem until a paver rocks underfoot after a monsoon, a joint sand line washes out toward the street, or a hairline crack opens across the surface after a hard freeze on a winter morning. By then the base is usually the story, not the stone.
Which Cambridge Pavers Models This Applies To

Cambridge makes a deep catalog of paver lines, and the right replacement depends on which series you have. Face-mix and full-color tumbled lines differ in thickness tolerance and edge profile, which matters because a new paver has to sit flush with the existing field. Start by identifying what’s actually down: flip one loose unit and look for a stamp or imprint on the underside, then measure the thickness. Standard concrete pavers in this market run about 2 3/8 inches for pedestrian and light-driveway loads and closer to 3 1/8 inches where vehicles turn and park. Measure two or three units across the field; if they read differently, you’re matching to a discontinued profile and need a color and dimension match rather than an exact series.
The OEM-versus-aftermarket call is where Boulder City owners get stuck. Cambridge-specific replacement pavers are the clean answer when the color lot is still available, but color lots shift between production runs, so a perfect match is not guaranteed even from the original manufacturer. A quality aftermarket paver from a documented line (Belgard is one we spec regularly) can meet or beat the original on freeze-thaw performance if the dimensions and color family line up. We give you both paths in writing before any work starts: exact-match Cambridge where available, verified compatible substitute where it isn’t, and the price for each.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
- Rocking or loose pavers. The bedding layer under a single unit has washed out or settled. In Boulder City this usually traces back to a base that wasn’t compacted in lifts, so water finds the low spot and pumps the sand out from under the paver.
- Joint sand washing away after storms. The desert’s short, hard rain events scour polymeric or plain joint sand out of the joints and down the slope. Once the joints open, water gets into the base and the failure accelerates.
- Hairline cracks that spread. A paver that cracks across the middle is telling you the load isn’t being carried evenly. Thin base, a soft subgrade pocket, or a driveway poured over an old slab will all produce the same crack pattern.
- Sunken or heaved sections. A dip in the driveway or a lip that catches a tire means the base moved. Freeze-thaw cycles at Boulder City’s elevation do this to shallow bases that don’t drain.
- Efflorescence and staining that won’t scrub out. White mineral bloom on the surface is moisture moving through the paver. When it keeps returning after cleaning, water is trapped in the base and has nowhere to go.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what paver work runs in Boulder City, priced as installed work, not a bare part:
| Scope | Installed price range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation (comparison) | $4,500 – $12,000 |
| Asphalt driveway paving (comparison) | $3,500 – $9,000 |
| Driveway replacement (remove and redo) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What moves the number: how much of the existing field can be salvaged, whether the base gets repaired or rebuilt, lineal feet of edge restraint, and whether the driveway drains to a curb, a channel, or the street. A localized repair where ten pavers are lifted and reset sits at the bottom of the range; a full driveway with a rebuilt base sits at the top. Your written quote breaks out removal, base prep, bedding sand, pavers, edge restraint, joint sand, and compaction, with a line for each. There are no change orders at the door. Every completed project carries our 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely do three things yourself: photograph the failure, measure the thickness and count the affected pavers, and check whether water is pooling at that spot after the next rain. What you should not do is pry up a section and reset it on sand you didn’t compact and edge-restrain. Here’s why that goes wrong. A paver only performs as well as the base under it, and the base is the part you can’t see. Reset a paver without fixing the washed-out bedding and it will rock again within a season. Skip the edge restraint and the field migrates outward until the joints open. Boulder City’s hard sun and monsoon runoff punish a shortcut fast.
When you’re ready for a real fix, call (844) 797-9259 for a free estimate. A live person answers around the clock, and we’ll put the price in writing before anything gets pulled up.
FAQs

How long do Cambridge Pavers driveway pavers last in Boulder City?
A properly installed paver driveway in Boulder City should hold 25 to 30 years or more; the pavers themselves outlast the base in almost every failure we see. The lifetime is set by base depth, compaction, and drainage, not by the stone. If you’re seeing failures inside ten years, the base is the suspect. Call (844) 797-9259 for a free estimate on a repair.
Can a failing paver driveway be repaired instead of replaced?
Yes, often it can. If the failure is localized and the color lot is still matchable, we can lift the affected section, rebuild the base under it, reset the pavers, and re-sand the joints. A full replacement only makes sense when the base has failed across the whole field or the profile is discontinued and the mismatch would show. We’ll tell you which one you’re looking at, with the price for both, before any work starts.
How long does a paver replacement take?
A localized repair takes a day or two. A full driveway install typically runs three to five days from demolition to final compaction and joint sanding, depending on square footage and how deep the base has to be rebuilt. We schedule it, keep the site clean, and hand you a signed written guarantee at close.
How do you source the pavers?
We source through documented paver lines with published specs and manufacturer warranties, Cambridge where the exact match is available and compatible alternatives like Belgard where it isn’t. The material source, color, and dimensions all appear on your written quote, so you know exactly what’s going down. For the broader project, we also work with KraftMaid, Cambria, and Silestone, alongside our full brand roster. Call (844) 797-9259 for a free estimate.
Ready to get your driveway or paver project squared away? Call (844) 797-9259 for a free estimate. We’ll walk the site with you, put a written price in your hands before any work begins, and back the finished job with our 365-Day Done Right Promise. Our technicians have up to 22 years of experience. Live person answers, any hour.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












