







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Driveway & Pavers: The Boulder City Owner’s Guide
We install and repair Cover-compatible driveway and paver systems in Boulder City, and a typical replacement or rebuild runs $7,000 – $18,000 for a paver driveway, $4,500 – $12,000 for concrete, and $3,500 – $9,000 for asphalt. Small repairs and resealing start much lower, at $250 – $700. We’re an independent service provider, not affiliated with Cover; we work with Cover products because they’re specified in a lot of Boulder City homes, and we know how their systems are put together.
Owners usually find out something’s wrong the same way: a paver that rocks underfoot after a monsoon, a hairline crack that widens across the driveway apron, or a low spot where water pools and won’t drain off toward the street. In Boulder City, the give-away is often a section that heaves after a cold snap and never settles back flat. That’s the surface telling you the base underneath has moved.
Which Cover Models This Applies To

Cover’s driveway and paver products aren’t one universal system. Compatibility comes down to three things: the paver profile and thickness you have now, the base and edge-restraint detail that holds the field together, and the sub-base spec under a Boulder City driveway. The most useful thing you can do before you call anyone is measure. Pull one loose or damaged paver and note its length, width, and thickness to the nearest quarter inch. Photograph the edge restraint and any markings on the underside. That set of measurements tells us whether we’re matching an existing Cover profile or rebuilding the section to a spec that will hold.
On the OEM-versus-aftermarket decision, here’s our honest read: pavers are a case where a quality matched equivalent usually serves the homeowner well, provided the thickness, compressive strength, and color match the field. Where we don’t cut corners is the base and the edge restraint. That’s where the failures start, and no paver, OEM or otherwise, will stay put on a base that wasn’t compacted right. We source to the same documented-brand standard we hold across every job, with Belgard and Unilock among the hardscape lines we work with, so the spec is traceable and the manufacturer’s warranty backs our own.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Driveway & Pavers Is Failing
Not every one of these means full replacement. But each points to a specific cause, and knowing the cause is what keeps you from paying for a rebuild when a repair would hold.
- Pavers that rock or shift underfoot. The bedding sand has washed out or the base wasn’t compacted to depth. Movement at the surface almost always starts below it.
- Widening cracks or open joints. Joint sand has eroded and water is getting under the field. In Boulder City’s dry heat, sun-baked sand loses its binder faster than most owners expect.
- Pooling water and poor drainage. The driveway has lost its slope toward the street, or the sub-base has settled. Standing water is the single biggest driver of paver failure here.
- Heaving or lifting sections after a freeze. Boulder City sits high enough that winter nights get cold, and saturated ground under a paver can lift it. When a section heaves, the base has taken on water it couldn’t shed.
- Staining, efflorescence, or color loss. Mineral salts pushing up through the surface, or UV fading. Cosmetic on its own, but a sign the sealer has worn through and the pavers are unprotected.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Boulder City homeowners actually pay, installed, with labor included:
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Full driveway replacement: $5,000 – $14,000
- Driveway sealing: $250 – $700
- Paver patio installation: $3,500 – $11,000
Where a number lands in the range depends on square footage, how much base has to come out and be rebuilt, the paver profile you choose, and access. A tight lot or a driveway that needs full tear-out and haul-off costs more than a resurface over a sound base. You get a written price before any work starts, itemized so you see parts, base prep, and labor as separate lines. No numbers that move at the door. Every completed driveway is covered by the 365-Day Done Right Promise; if the work fails within that full year, we return and correct it at no charge.
DIY or Call Us?
Some things are worth checking yourself. Measure that loose paver, note where water pools, and take photos of any crack that’s spreading. Sweep joint sand back in on a dry day and reseal if the surface has gone porous. Those are low-risk and tell you a lot.
What goes wrong on DIY is the base. The failure underneath a Boulder City driveway is almost always sub-base or compaction, and fixing it means lifting the field, digging out to depth, re-grading the slope, and compacting in lifts. Done wrong, a new field settles again within a season. There’s no dangerous component here like a garage spring, but there is real cost in getting it wrong twice. If a paver section has moved more than a quarter inch or water is pooling, that’s the point to call. Reach us at (844) 797-9259 and we’ll tell you straight whether it’s a repair or a rebuild.
FAQs

A properly installed paver driveway should hold 25 to 30 years, but in Boulder City’s climate the base matters more than the paver. The dry heat and occasional winter freeze work the sealer and joint sand harder than a milder climate would, so plan to reseal every 3 to 5 years. Skip that maintenance and the lifespan shortens. Call (844) 797-9259 for an honest read on yours, and estimates are free.
Often, yes. If the failure is confined to one section and the surrounding field is stable, we can lift that section, rebuild the base, and relock it to the rest. Full replacement only becomes necessary when the base has failed across the whole driveway. That’s a call we make on site, in writing, before any work starts. Call (844) 797-9259 to schedule a free estimate.
A single-section repair is usually a one- to two-day job; a full paver driveway rebuild typically runs three to five days depending on square footage and how much base has to be replaced. We give you the schedule in the written scope before we start, so you’re not guessing. Call (844) 797-9259 for a firm timeline and price.
We measure the existing profile and match thickness, strength, and color, working from a documented roster of hardscape lines including Belgard and Unilock. Where an OEM match is available and makes sense, we spec it; where a matched quality equivalent performs the same, we tell you so and let the written spec decide. Nothing gets ordered without your sign-off. Call (844) 797-9259 and we’ll walk you through the match.
We also work with KraftMaid, Cambria, and Silestone on the interior side, and every job follows The Garrison Standard: a written price before work begins, background-checked, uniformed technicians you know by name before they arrive, and a live person answering the phone 24/7, not a voicemail. Bradford Remodeling Boulder City is part of the Garrison Partners family, independently owned and operated, and our technicians have up to 22 years of experience.
Whether your Boulder City driveway needs a single section fixed or a full rebuild, start with the free estimate. Call (844) 797-9259 to schedule yours, and we’ll put the number in writing before a single paver comes up.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












