







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Boulder City Owner’s Guide
CWS-compatible bathroom remodeling in Boulder City typically runs $9,000 to $28,000 installed, depending on the size of the room and how far the rough-in goes. We’re an independent provider – we’re not affiliated with CWS – and we work with the layout standards CWS builds to so your vanity, shower valve and tile field line up with what’s already in the wall. Most Boulder City owners start noticing trouble in one of three places: a vanity cabinet face that swells after a slow leak, grout lines at the shower base that open up and stay wet, or a shutoff valve behind the toilet that won’t close all the way. Those are the small failures that turn into a full remodel if you let them sit through another summer.
Which CWS Models This Applies To

CWS builds a handful of bathroom lines, and the part that matters most to a remodel is the cabinet carcass and the valve rough-in. If your vanity door has a hinge stamped with a Blum or Grass logo, it’s a European-style concealed hinge and the replacement cabinet needs the same 32mm drilling pattern – the standard CWS uses across most of its modern bath lines. Older CWS stock with overlay doors and a visible European hinge on the face won’t accept a same-size replacement door without moving the bores.
Find the model plate inside the vanity cabinet, usually stapled to the back panel or the inside of a side wall. If the plate is gone, measure the cabinet depth (most CWS bath vanities are 21 inches deep, not the standard 24) and the door width. That depth is the compatibility gotcha most Boulder City homeowners miss: a 24-inch-deep vanity will push through the wall behind it or crowd the toilet clearance.
On the OEM-versus-aftermarket call: for hinges, drawer slides and cabinet fronts, a quality aftermarket equivalent is often better than the original because the hardware has been upgraded since your unit was built. For tile and shower valve trims, stick with the manufacturer-specified part. A Moen or Kohler valve trim built for a specific rough-in won’t swap to a different brand without changing the rough-in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Bathroom Remodeling Is Failing
- Vanity cabinet face swelling or delaminating along the bottom edge. A slow leak at the P-trap or supply line wicks into the particleboard core. Boulder City’s dry air masks the moisture during summer, then the face fails fast when the room stays humid.
- Grout cracking at the shower base or along the floor-to-wall joint. Usually a sign the substrate under the tile has shifted or the shower pan wasn’t bedded properly. Boulder City’s expansive soils move seasonally, and a pan installed without a proper mortar bed will telegraph that movement up through the grout.
- Caulk line that opens every few months at the tub or shower surround. The plastic surround is moving because it’s not fastened to the studs at the right spacing, or the wall behind it is wet. Recaulking over a wet substrate traps the moisture and makes the problem worse.
- Shutoff valves that won’t close or weep at the packing nut. Original builder-grade valves often fail in the 10-to-15-year range, and a valve that won’t shut off means a small supply-line leak becomes a full flood. Replace every valve behind a toilet or under a sink during any remodel.
- Vanity drawers that stick or hinges that won’t hold adjustment. Slides and hinges wear out long before the cabinet box does, especially in a humid bath. The fix is a hardware swap, not a new vanity, unless the cabinet face is already water-damaged.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the pricing we give in writing before any work starts:
| Bathroom scope | Installed range in Boulder City |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What pushes a job toward the top of the range: moving the toilet or shower drain (Boulder City homes on a slab make that a bigger lift), a hidden moisture issue behind the surround, or a substrate rebuild under the tile. What’s included in every price: tear-out and haul-away, new supply and shutoff valves, substrate repair, tile or surround install, cabinet and fixture set, caulk and grout, and cleanup at close. Every price is written down before we start. Nothing moves at the door. The work is covered by the 365-Day Done Right Promise – if a joint fails or a fixture leaks within a year, we come back and fix it at no charge.
DIY or Call Us?
You can safely check a few things: put a level on the shower pan to see if it drains toward the drain, look for soft spots behind the toilet, and turn every shutoff valve under the sinks to confirm they close. Replacing a vanity door or a drawer slide set is also a reasonable owner job if the hardware matches the bore pattern.
Where DIY goes wrong in a bath: pulling a shower surround off a substrate that’s wet behind it, or resetting a shower valve without shutting down and re-soldering the rough-in. Water damage compounds fast once a wall is open, and a valve you don’t seal properly will run water inside the wall where you can’t see it. That’s where we come in. Call (844) 797-9259 and we’ll set a free estimate.
FAQs

The cabinets and tile field typically hold 20-plus years in Boulder City, but the shower pan, grout and caulk lines need attention at the 8-to-12-year mark because the dry climate hides leaks until the substrate is already wet. Call (844) 797-9259 for a free estimate if your bath is in that window.
Yes, if the failure is confined to hardware or a single fixture. A vanity that’s structurally sound but has bad hinges, or a shower that needs a re-caulk and a fresh grout, is a repair. If the substrate behind the tile is wet or the pan is moving, a patch will fail within one season. Call (844) 797-9259 and we’ll tell you honestly which side of that line you’re on.
A vanity or shower replacement runs 2 to 4 working days. A full CWS bath remodel with substrate work runs 2 to 3 weeks depending on the tile and fixture lead times. Boulder City jobs on a slab with drain relocation take the longest. Call (844) 797-9259 for a schedule on your specific bathroom.
Through a documented roster of name-brand manufacturers – CWS-compatible cabinet hardware, Kohler and Moen valves and fixtures, KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces – so every specification is traceable and warranties pass through to you. Call (844) 797-9259 for the parts list on your job.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












