







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Home Additions & ADU: The Boulder City Owner’s Guide
A CWS-compatible home addition or ADU in Boulder City typically runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached ADU, installed, permitted, and inspected. We’re a Boulder City remodeling contractor that works with CWS system components and specs, and we don’t schedule these as same-day swaps – additions and ADUs are planned work that involves foundations, rough-ins, and inspections. If a CWS panel, tie-in, or system component has failed, you usually find out one of three ways: a hairline crack that keeps reopening along a seam, a heating or cooling loop that can’t hold pressure, or a permit correction that flags a mismatched spec. Below is what fails, what a real replacement costs in Boulder City, and when to call.
Which CWS Models This Applies To

CWS covers more than one product family, and the part that fits one series doesn’t fit another. Before you order anything, find the data plate or panel label – it’s usually on the interior face of the failed panel, inside a junction box cover, or on the original stamped structural drawing if you kept it. It gives you the series and a lot or model number. Take a photo of it; the number on the box is often the only reliable match.
Three compatibility traps we see in Boulder City:
- Series drift. CWS revised panel profiles and connection details across series over the years. A panel that looks identical in a photo can have a different edge profile or fastener pattern, and it won’t seat.
- Trim and finish codes. Two units with the same footprint can carry different trim packages, and the exterior finish code determines what cladding actually matches.
- Older stamped drawings. If your home was added onto before the current CWS spec, the install may have used a discontinued component. You need the drawing, not the part number alone.
On OEM versus aftermarket: for structural and weather-sealing parts, we source OEM or documented equivalent – not a generic substitute. For trim and cosmetic pieces, a quality aftermarket match is fine and often saves money. We’re an independent Boulder City provider, not affiliated with CWS, so we match the spec and tell you straight which route makes sense.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Home Additions & ADU Is Failing
Additions and ADU failures rarely announce themselves. They show up as small, repeated symptoms a homeowner learns to live with until a permit or a leak forces the issue. These five are the ones we’re called about most in Boulder City.
- A seam or joint that keeps reopening. Cracks that return after patching point to movement, not cosmetic wear – often a foundation or connection issue underneath.
- Water intrusion at a panel edge or roofline. Failed flashing or sealant lets moisture past the envelope. In Boulder City’s dry heat with hard sun, sealant and gaskets degrade faster than the panels themselves.
- Doors and windows that stick or won’t latch. A structure that’s settling or racking throws openings out of square – a symptom, not a hardware problem.
- Heating or cooling that won’t hold. If a system loop or duct loses pressure or a zone won’t balance, the tie-in to the main house is usually the culprit.
- A failed inspection or a correction notice. A code official flags a spec that doesn’t match the approved drawing. That’s a paperwork and component mismatch, and it stalls the project until corrected.
Any one of these is worth a look. Two or more together usually means something structural or envelope-related is moving, and the sooner it’s diagnosed the less it costs to correct.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a CWS-compatible addition or ADU runs in Boulder City, installed:
- Home addition: $45,000 – $130,000
- ADU construction: $90,000 – $220,000
- Garage conversion (a lower-cost ADU path): $30,000 – $80,000
- Panel, tie-in, or component replacement within an existing addition: quoted line by line against the scope
The range is driven by size, foundation and site work, whether plumbing and electrical have to be extended, permit and inspection costs, and finish level. You get a written price before any work starts – a real number, not “call for a quote” – with parts and labor broken out, and every completed project carries the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge. Permits are pulled and inspections passed before we call the job done.
DIY or Call Us?
Some of this you can safely check yourself. Photograph the data plate and any crack or water stain. Note when the symptom first appeared and whether it changes with weather. Measure the crack width. Compare a door opening against square. That information helps us and costs you nothing.
What you shouldn’t do is open an energized panel, cut into a structural connection, or attempt a flashing or envelope repair that hides a water problem instead of fixing it. Those are where DIY goes wrong – not because you can’t hold a tool, but because a misdiagnosed envelope or structural issue gets expensive fast. If a door won’t latch or water is getting in, call. Dial (844) 797-9259 and a live person answers, day or night, to schedule your free estimate.
FAQs

With the envelope kept sound, 30 to 50 years is realistic for the structure itself, but the failure points are the flashings, sealants, and gaskets – not the panels. In Boulder City’s sun, sealant around rooflines and panel edges typically needs attention well before the structure does. That’s why we inspect the envelope at every service call. Call (844) 797-9259 for a free estimate on an envelope review.
Often yes. A failed sealant joint, a flashing, or a single component can be repaired without tearing out the addition, and that’s usually the first thing to check. Structural movement, a mismatched spec, or a failed inspection correction may push toward replacement of specific parts rather than the whole structure. We tell you which it is before any number is written.
Component-level replacements can move quickly; a full addition or ADU is a planned project measured in weeks to months, never a same-day job. We give you the schedule in writing with the price so you know what you’re committing to. Call (844) 797-9259 to schedule your free estimate and a scope walk-through.
We match against the data-plate series and model number and pull the documented CWS spec rather than guessing by photo. For structural and weather-sealing components we use OEM or documented equivalent; for trim we’ll recommend a quality aftermarket match when it saves you money. We don’t claim stock on a truck – parts are ordered to spec for your job. You also get coordination with the documented roster of premium brands Bradford installs, including KraftMaid, Cambria, and Silestone, where finish work is involved.
Every project gets a written price before work begins, background-checked and uniformed technicians on site, and a signed written guarantee in your hand at close – site clean, scope documented. Call (844) 797-9259 for a free estimate in Boulder City.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












