







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Boulder City, NV
We provide independent Dvele service across Boulder City, handling the site prep, module setting, and utility and finish tie-ins that a factory-built home needs once it lands. What makes our Dvele work here different is simple: this is a town locked in by federal land, with a Depression-era historic district and 100°F+ summers, so a module project usually means fitting an existing infill lot and closing seams that the heat will test within a few seasons. We are an independent provider, not affiliated with or authorized by Dvele. Call (844) 797-9259 to schedule your free estimate.
Why Boulder City Residents Choose Us for Dvele Service

Dvele builds modular, factory-completed homes and additions, which means the work on your property is less about framing lumber than about the field side: preparing the foundation, coordinating the crane and set, and closing out the seams and systems the factory left open. Our technicians have up to 22 years of experience, and they know the delivery sequence and the commissioning steps that a factory-finished envelope demands.
In Boulder City, that experience gets tested. The desert sun and heat cycling work on module skins and trim in a way a mild climate never does, and we plan for it from set day rather than after the first leak shows. We use module-specific hardware, seals, and connection kits from Dvele or the manufacturer’s specified sources so your envelope and warranty posture stay intact, and we take quality aftermarket materials for standard fixtures and finishes. Every job gets a written price before any work starts, and the 365-Day Done Right Promise covers the completed work for a full year; if it fails inside that window, we come back and correct it at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Boulder City
Most Dvele issues here are site-interface and finish problems, not factory defects. These are the ones we see most:
- Seam and closure failures where modules meet. Panel gaps, finish cracking, and broken weather seals show up where factory-finished modules join on site. Boulder City’s summer swings from cool nights to 100°F+ afternoons work those joints loose faster than a stable coastal climate ever would.
- Exterior finish and sealant degradation from UV. Intense high-desert sun eats sealant on module skins and trim, and the south and west elevations take the worst of it. We inspect and re-seal those faces on a schedule that matches the exposure, not a generic one.
- Utility stub-out and connection problems at the module-to-site interface. Plumbing, electrical, and HVAC tie-ins need careful commissioning after the module lands. A rushed connection shows up months later as a pressure drop or a warm room.
- Foundation and leveling issues on stem walls or slabs. Modules sitting on site-built foundations can settle unevenly, and expansive desert soils plus flash-flood drainage concerns around the surrounding canyons make that more likely. We check level and drainage before we touch finish work.
- Additions that don’t line up with the existing structure. When a Dvele addition module meets a 1930s-era adobe or masonry home, the roofline, wall plane, and flashing details are all custom. We plan those transitions on paper before the crane arrives.
Dvele Service in Boulder City: What Local Conditions Mean for Your Equipment
Boulder City is ringed by federal land, Lake Mead National Recreation Area and BLM acreage on most sides, so a Dvele module or ADU project here usually can’t expand the lot. It has to fit an existing infill parcel, or it has to navigate federal land-use constraints that don’t apply in a city with open subdivisions. That changes the job. On a tight historic-district lot, crane access and staging space decide whether set day goes smoothly, and we plan the crane position, the module swing, and the staging footprint before the truck is scheduled. Historic design review adds another layer when exterior work is visible from the street, and we walk that process with you. The practical result: Boulder City Dvele projects are logistics-first, and the seam closure and commissioning that follow depend on a clean set.
Dvele Models & Products We Service in Boulder City
We work on Dvele’s full-home modular series, the factory-finished single-family units; the Dvele ADU and accessory dwelling unit modules; prefabricated home addition modules; and net-zero-ready modular home packages, where the envelope and mechanical tie-ins need extra care at commissioning. Parts sourcing is job-specific. Module hardware, seals, and connection kits come through Dvele or the manufacturer’s specified source; standard finish materials and fixtures can be quality aftermarket. A typical Dvele modular project arrives as factory-finished modules craned onto a prepared foundation, so the field work is site prep, set, and closing those ties. In Boulder City, the heat tends to open module seams within a few seasons, and the usual fix is re-sealing, re-flashing, and re-commissioning the plumbing and electrical at the interface rather than touching the factory envelope. Our Dvele service covers all of it, and we repair and re-commission before we replace.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Boulder City

Here’s what the work runs in Boulder City. These are real ranges, not a “call for a quote.”
| Project | Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives cost up: crane access and staging on a tight lot, foundation work on expansive soil, design review on a historic-district elevation, and the depth of the utility re-commission after set. Our free estimate includes a site walk, a look at the module interface and foundation, and a written line-item price before work starts. Call (844) 797-9259 for an exact quote.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Boulder City
Can a Dvele modular home or ADU be built on a small infill lot in Boulder City? Yes, and infill is often the only option here, because federal land on most sides rules out expanding the parcel. The constraint is crane access and staging, so we assess both before quoting.
Why do Dvele module seams and seals fail faster in Boulder City? The 100°F+ summer heat cycling and intense UV work the module-to-module joints and exterior sealant harder than a mild climate does, and south and west elevations degrade first. Re-sealing and re-flashing on a Boulder City schedule keeps those seams sound.
Does Dvele modular construction trigger Boulder City design review? Often, yes, especially in the historic district, where exterior changes visible from the street go through review. We help you understand what the review will ask for before the design is final.
What does a Dvele kitchen remodel run in Boulder City? A full kitchen remodel typically runs $14,000 – $45,000 here. Call (844) 797-9259 for an exact quote; estimates are free.
Is an independent provider the same as a Dvele-authorized installer? No. We are an independent provider, not affiliated with or authorized by Dvele. What we bring is field experience with the set, seam, and commissioning work, backed by a written price and the 365-Day Done Right Promise.
Service Areas Near Boulder City
We serve Boulder City and the surrounding area, including Henderson, Whitney, Paradise, Enterprise, and Winchester. If you’re near the Boulder City line, ask about your address when you call. Our Boulder City service area covers the historic district and the infill parcels around it.
Book Your Dvele Service in Boulder City Today
Call (844) 797-9259 to schedule your free estimate. We’ll walk your lot, look at the module interface and foundation, and give you a written price before any work starts. A live person answers, 24 hours a day.
Written by the team at Bradford Remodeling Boulder City.












