







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Boulder City Owner’s Guide
Kitchen remodeling that works around ES Windows kitchen and patio door units in Boulder City typically runs $14,000 to $45,000 installed, depending on layout, cabinet run, and whether the window openings move. If you already have ES Windows products in the kitchen, the framing and glazing are on your side – those units are built for hard sun and wind, and our crews plan the new cabinetry, counters, and backsplash around them instead of fighting them. The part that usually starts the conversation isn’t the window itself. It’s what surrounds it.
Owners in Boulder City most often call us when water is tracking in around a kitchen window sill after a monsoon, when a cabinet run won’t sit flat against a wall that’s moved, or when a sliding kitchen ES Windows door won’t track cleanly anymore and the room has started to feel out of square. Those are the three entry points we see, and each one tells us something different about what’s actually failing.
Key Takeaways
- Full kitchen remodeling in Boulder City: $14,000 – $45,000; small kitchen: $9,000 – $20,000.
- We’re an independent remodeler, not affiliated with ES Windows – we work with the units you already own.
- Every project gets a written price before any work starts, and the 365-Day Done Right Promise covers completed work for a full year.
- Monsoon-driven water intrusion around kitchen windows is the most common ES Windows-adjacent failure we open up in Boulder City.
Which ES Windows Models This Applies To

ES Windows has made a range of aluminum and vinyl-framed products over the past few decades, with kitchen-adjacent units most commonly falling into sliding windows, casement windows, fixed picture windows, and sliding patio or pass-through doors. The relevant distinction for remodeling isn’t the marketing name on the glass – it’s the frame profile and the rough opening. A sliding window and a casement from the same era are different animals when you start planning cabinetry depth. So is a picture window with no operable sash versus one that opens.
Identify what you have before we order anything. Look for the manufacturer’s label in the head jamb or on the frame edge; those stickers fade in Boulder City heat faster than owners expect, so photograph them the moment you find one. If the label is gone, measure the rough opening at the studs and note the glass-to-frame reveal. Both measurements tell us whether your unit is a standard size or a custom cut. That matters for two reasons: ES Windows custom and semi-custom kitchen units can’t be matched by walking into a supply house, and a replacement window spec has to line up with the new wall finish so the casing doesn’t buckle.
The OEM-versus-aftermarket question is real here. For operable hardware – locks, rollers, sash lifts – quality aftermarket ES Windows-compatible parts exist and are usually fine. For the glazing unit, the frame extrusion, and the rough-opening dimensions, there’s no good aftermarket substitute. If a unit needs full replacement, it’s a window order, not a parts order, and the lead time is weeks, not days. That changes the project schedule, and it changes what we sequence first. Bottom line: kitchen ES Windows hardware can often be sourced as a compatible part; kitchen ES Windows sash and frame cannot.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Kitchen Remodeling Is Failing
- Water staining or soft sill board after rain. The likely cause is a failed or missing window flashing detail at the head or sill, not the glass. In Boulder City, this shows up fast after a summer monsoon cycle because the rain hits hard and sideways.
- Cabinetry pulling away from the wall or won’t sit plumb. A wall or window rough opening that’s moved out of plane – common in older Boulder City homes where exterior framing has shifted. The cabinet isn’t the problem; the substrate is. Once we open the wall, we can see it.
- Sliding kitchen door dragging or off its track. Usually worn rollers or a bent bottom track, sometimes both. This is the one ES Windows-adjacent issue an owner can often confirm by hand.
- Condensation or fog on the inside of the glass. A broken seal in the insulated glass unit. No sealant will fix it; the glazing unit is the failed part. Sun exposure on east and south-facing kitchen glass in Boulder City accelerates this.
- Window casing or trim with gaps, gaps that move. Thermal expansion and contraction cycling the frame won’t be solved by recaulking. Casing gaps that return season after season mean the frame or wall is moving and we need to see it before putting new trim on.
Replacement Cost & What’s Included

For Boulder City, expect these installed ranges on the kitchen side. These are the real numbers we work from; a written line-item quote confirms which apply to your job.
| Scope | Installed Range (Boulder City) |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet layout and door profile, whether the ES Windows kitchen unit needs to come out to relocate a run, counter material (Cambria and Caesarstone sit at the top of the range; laminate doesn’t), and whether the rough opening behind a window is being reflashed or resized. Each quote shows parts and labor separately so you’re not guessing what the window work cost. Every completed Boulder City project carries the 365-Day Done Right Promise – if the work fails inside a full year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Honest split. You can safely check ES Windows hardware by hand: slide the sash, look at the rollers, wipe the track, look for rust on the lock body. You can also check for water staining at the sill by running a finger along the interior wood – if it’s soft, stop and call. You should not reflash an ES Windows rough opening yourself. Getting the sill flashing and head flashing order wrong on a unit that’s built for wind-driven rain is how you get a thousand dollars of cabinet rot a year later, not a week later. You should not try to rehang a kitchen window sash or pull a glazing unit that’s failed; both are jobs for someone with the right tools, and a dropped sash is dangerous.
If you’ve checked the easy stuff and the window is still the problem, we’ll come look at it and give you a written number. Call (844) 797-9259 for a free estimate. A live person picks up around the clock.
FAQs

Operable glass and gaskets in ES Windows units typically hold up 15 to 25 years in southern Nevada; aluminum frames outlast vinyl in the sun, but insulated glazing on south and east exposures can fog and fail closer to the 12-year mark. Call (844) 797-9259 for an exact quote – estimates are free.
Often yes on hardware. Rollers, locks, sash lifts, and screen components can usually be repaired or replaced with compatible parts. Failed glazing seals and bent frames can’t be repaired; they require a new insulated glass unit or a new window order. Call (844) 797-9259 and we’ll tell you which side of that line you’re on.
Hardware repair on a single ES Windows kitchen unit: about one to two hours. A full kitchen window replacement sequenced inside a remodel typically adds one to three days to the schedule, plus lead time on the window order itself. Call (844) 797-9259 for an exact quote – estimates are free.
We source by model and rough-opening measurement, not by eyeballing the old part – the label in the head jamb is the best starting point. For hardware we’ll use quality compatible aftermarket parts where the spec matches; for glazing and frame we order from the manufacturer line. Call (844) 797-9259 to schedule your free estimate.
Closing
If you’ve got an ES Windows kitchen unit that’s failing, water staining, or fighting your cabinetry, we want to see it. Bradford Remodeling Boulder City works kitchen remodeling as a documented scope with a written price before work starts – no numbers that move at the door – and we also service KraftMaid, Cambria, and Silestone specifications when those are already in the plan. Calls are answered by a live person, twenty-four hours a day, and every completed project carries the 365-Day Done Right Promise. Call (844) 797-9259 for a free estimate on your Boulder City kitchen.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












