







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Home Additions & ADU: The Boulder City Owner’s Guide
We build and finish Jerith-compatible home additions and ADUs in Boulder City, and the installed range for the work we handle here runs $45,000 – $130,000 for additions and ADU shells, with a fully finished ADU running $90,000 – $220,000. We are an independent contractor and not affiliated with Jerith. Homeowners usually call us after a different discovery: a gate panel that has gone slack and won’t latch, a hinge post that has leaned out of plumb after a summer of ground movement, or a screen frame that has pulled free of its rail in the wind. The addition was fine. The outdoor envelope on it wasn’t.
Key takeaways: Jerith is best known in Boulder City as a fence, gate, and rail manufacturer, and its components land on the exterior of additions and ADUs. When one fails, the fix is usually a matched part plus correct footing and anchoring, not a new addition. We carry no parts and stock nothing on a truck, so every component is sourced against your actual model and measured on site.
Which Jerith Models This Applies To

Jerith builds aluminum ornamental fencing, gates, and railing across several product lines, and the parts are line-specific. A picket cap, hinge, or rail bracket from one series will not seat on another, even when the profiles look identical at arm’s length. Before we order anything we read the sticker on the gate post or the inside of a rail, measure the actual picket spacing and rail height, and photograph the hardware in place. If the label is gone, those measurements get you to the right part.
OEM versus aftermarket is a straight trade. OEM Jerith parts fit the first time and hold their finish, and on a gate that swings daily that matters. Aftermarket equivalents cost less but vary in wall thickness and coating, and in Boulder City’s sun and wind exposure a thinner casting is the one that fails early. We quote both when both exist and tell you which one we’d put on our own gate. We also install KraftMaid, Cambria, and Silestone products on the interior side of these builds.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Home Additions & ADU Is Failing
- The gate sags and drags. The hinge or post footing has moved, and the hinge is taking load it was never sized for. In Boulder City, caliche-heavy soil and summer shrink-swell are the usual cause.
- Powder coat is chalking or flaking. Years of UV at this elevation wear the finish, and once it breaks the aluminum starts to pit. A re-coated or replaced panel stops the spread.
- A picket or rail is loose at the joint. The rivet or fastener has worked loose from wind cycling. Tighten or replace the fastener before the hole enlarges.
- The latch won’t catch or the gate won’t close square. Either the post has leaned or the latch hardware has worn. A sagging post needs a footing repair, not a new latch.
- Screen or panel edges pull free in wind. The spline or retainer has aged out. This is the cheapest failure to catch and the most expensive to ignore on an open addition.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here is what the work runs in Boulder City. These are installed prices, not parts prices, and every one of them is a written number before a tool comes out.
| Work | Installed range |
|---|---|
| Home addition (Jerith exterior package) | $45,000 – $130,000 |
| ADU construction (fully finished) | $90,000 – $220,000 |
| Gate hinge, latch, and hardware replacement | $250 – $900 |
| Post footing repair and re-plumb | $400 – $1,200 |
| Panel or picket section replacement | $350 – $1,400 |
| Powder coat repair or re-coat | $300 – $1,100 |
The range moves on panel count, the condition of the footing, and whether the part is OEM or a quality aftermarket match. We itemize parts and labor separately so you see both. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge. That’s a written guarantee in your hand at close.
DIY or Call Us?
You can safely check a few things. Look for the model sticker, measure picket spacing and rail height, and confirm whether the post is plumb with a level. Tightening a loose screw or replacing a worn latch is a reasonable afternoon.
Where DIY goes wrong is footing and anchoring. A leaning gate post isn’t a hinge problem, and bolting new hardware onto a moving post just moves the failure. Additions and ADUs also carry structural and permitting questions that belong with a licensed contractor. Jerith gate and fence hardware is not high-tension or electrical, so this isn’t a danger job, but getting the footing right the first time saves you a repeat. Call (844) 797-9259 and we’ll tell you straight whether you need us.
FAQs

Expect 15 to 20 years on the aluminum itself and 8 to 12 on the powder coat under southern Nevada UV. Re-coating around year 10 buys you years more. Call (844) 797-9259 for an exact quote on your gate or addition.
Often yes. A worn latch, a loose rivet, or a spline that pulled free is a repair, not a replacement. A bent post or warped panel gets replaced. We quote the repair first and only recommend replacement when it’s the cheaper path long-term.
Hardware swaps are a half-day. A section or panel replacement runs one to two days. Footing repair depends on cure time. We give you the timeline in writing with the price, and we don’t start until you’ve approved it.
By model label and on-site measurement, ordered to your line. We stock nothing and carry no parts on a truck. That means the part fits when it arrives. Call (844) 797-9259 for a free estimate.
If you’ve got a Jerith addition or ADU part that’s failed, or you’re planning one on your Boulder City property, call (844) 797-9259 for a free estimate. You’ll get a written price before any work starts, background-checked and uniformed technicians on the job, and a live person on the phone whenever you call. That’s The Garrison Standard, and it’s the same on every project we run in Boulder City.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












