







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Bathroom Remodeling: The Boulder City Owner’s Guide
Kohler bathroom remodeling in Boulder City runs $9,000 to $28,000 for a full gut renovation with Kohler fixtures, and $3,000 to $8,500 when the job is a shower replacement or targeted fixture swap around an existing Kohler valve or toilet. If your Kohler faucet drips, your Memoirs toilet runs, or a 20-year-old Kohler valve cartridge has seized, we replace the part and reset the surrounding tile work without tearing out the room. Most owners first notice the problem as a slow drip under the vanity, a mineral-crusted aerator that won’t unscrew, or a toilet that refills on its own at 2 a.m. In Boulder City’s hard water (typically 150 to 250 ppm calcium carbonate), Kohler ceramic cartridges and fill valves often call it quits five to seven years earlier than the manufacturer’s published lifespan suggests.
Which Kohler Models This Applies To

Kohler is not one product line; it’s a dozen. The part number that fits a Memoirs Stately toilet fill valve will not fit an Archer, and the cartridge for a Forté single-handle faucet is not the same as the one in a Fairfax widespread. Cold-start this correctly by finding the model number stamped on the fixture itself: under the tank lid on toilets, on the back of the spout or inside the handle escutcheon on faucets, and on the drain body or the rough-in plate on showers and tub valves. Kohler also prints a CSA/ANSI code next to that model number (look for “ASME A112.18.1” on faucets, “CSA B45.1” on toilets), and that code matters when you’re ordering a compatible replacement rather than a lookalike.
Once you have that number, the OEM-versus-aftermarket decision is real. Kohler genuine cartridges, fill valves, and flush assemblies typically run $18 to $95 depending on the part, and they’re the safest match when the fixture is under ten years old or the valve has an unusual thread, seat diameter, or integrated pressure-balance feature. Quality aftermarket equivalents (Fluidmaster, Korky) run half that and work fine in standard 3-inch flapper toilets and common single-handle cartridges, but they are not always drop-in and the fit tolerance is where homeowners get burned. If you can’t find a stamped model number, the age of the fixture tells you something: Kohler changed its shower valve bodies in the mid-2000s, and older Boulder City homes often still have the pre-change version, where a “universal” cartridge simply won’t seat.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Bathroom Remodeling Is Failing
These are the symptoms we hear on the phone most often in Boulder City, and the underlying cause behind each one:
- Faucet drips steadily at the spout when the handle is off. The ceramic cartridge inside the valve body has worn or mineral-fouled; the seat no longer seals and water bypasses it. Common on Forté and Fairfax single-handle models after five to eight years in hard water.
- Toilet keeps refilling every few minutes. The fill valve or flapper is leaking past its seal, so the tank drains into the bowl and the valve reopens to top it off. In Kohler one-piece toilets, the flush tower assembly is the usual culprit rather than the flapper.
- Shower handle hard to turn or won’t hold temperature. On a Kohler pressure-balance valve, the balancing spool or cartridge has seized with scale. If the handle gets stiff before it fails, that’s your warning it’s days from giving out.
- Water pooling at the base of the toilet or along the shower threshold. Typically a failed wax ring, a worn Kohler seal, or cracked grout at the tile-to-fixture joint. In a shower, a failed seal can quietly rot the substrate behind the tile for months before you see it.
- Low flow or a sputtering aerator. Mineral buildup inside the aerator screen or the cartridge inlet. Sometimes a five-minute aerator swap fixes it; sometimes the whole cartridge is done.
Replacement Cost & What’s Included

For Boulder City, here’s what the work runs. A Kohler faucet cartridge replaced and the aerator reset runs $180 to $340 installed. A Kohler toilet flush assembly or fill-valve replacement runs $220 to $380. A shower valve cartridge swap runs $280 to $520. If the failed part is pushing you toward a full remodel, that’s where Boulder City bathroom remodeling prices live: a full bathroom remodel with Kohler fixtures runs $9,000 to $28,000, a small bathroom remodel $5,000 to $12,000, a tub-to-shower conversion $3,500 to $10,000, a walk-in shower installation $4,500 to $12,000, a shower replacement $3,000 to $8,500, and a Kohler vanity installation $800 to $3,000.
What drives the range up or down: whether the supply lines and drain need to be re-roughed, whether tile has to come up to reach the valve, and whether the toilet is one-piece (harder access) or two-piece. Every Bradford Remodeling Boulder City quote is a written, line-item price before any work starts, with parts, labor, and disposal broken out separately. All work on the job is covered by the 365-Day Done Right Promise – if it fails inside that first year, we return and make it right at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely do one thing: turn off the supply, identify the stamped model number, and look up the OEM replacement. That’s it. Everything past that gets risky fast. A water shutoff valve on a 30-year-old Kohler assembly can snap closed and start leaking into the wall; a seized shower cartridge pulled with too much force cracks the brass valve body behind the tile, which turns a $280 swap into a $2,000 tile-repair job. Kohler’s pressure-balance shower valves also carry a scald risk if they’re reassembled with the balancing spool in backward, and that’s a genuine injury hazard, not a scare tactic. And on the electrical side, if your job touches a GFCI outlet or the bath exhaust fan, that work belongs to a licensed electrician – not a homeowner with a YouTube video and a live wire.
For the swap itself, this is where we earn the call. Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and they’ll pull the part, install it, test it, and leave the site squared away with the repair written into your guarantee. Bradford Remodeling Boulder City is an independent service provider – we’re not affiliated with Kohler – but we install genuine Kohler parts and documented Kohler specifications as part of our standing brand roster, alongside KraftMaid, Cambria, and Silestone.
FAQs

Kohler publishes ten years or more for most ceramic cartridges in soft water, but in Boulder City’s hard water the real-world life is closer to five to eight years, and often less on a hot-water line. If your existing cartridge is past that window, plan the replacement before it fails rather than after. Call (844) 797-9259 for a free estimate on the swap.
Sometimes yes – a cartridge can be freed of mineral scale, and a fill valve can be adjusted rather than replaced. But once the ceramic has scored or the rubber seal has hardened, repair is a stopgap that fails again in weeks. We tell owners which one they’re looking at before we touch anything, and we put the choice in writing. Call (844) 797-9259 to schedule a free estimate.
A faucet cartridge or toilet fill valve is usually an hour to two hours on-site, including shutoff, removal, install, and testing. A shower valve cartridge is two to four hours because tile or trim has to come off and go back. A full bathroom remodel around the Kohler fixtures runs one to three weeks depending on scope. Call (844) 797-9259 – estimates are free.
We match on the model number stamped on the fixture plus the CSA/ANSI code, then order either genuine Kohler OEM or a documented aftermarket equivalent, whichever fits your fixture and budget. You’ll see the part number and price on your written quote before we order. Call (844) 797-9259 for a free estimate.
Get Your Kohler Repair Priced in Writing
If a Kohler fixture in your Boulder City bathroom is failing, don’t wait for it to become a water-damage repair. Call (844) 797-9259 for a free estimate – a live person answers, day or night. You’ll get a written price before any work starts, a background-checked technician on the job, and the 365-Day Done Right Promise standing behind the finished work.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












