







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling: The Boulder City Owner’s Guide
A full Kohler kitchen remodel in Boulder City runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and whether the layout changes. We install Kohler fixtures and Kohler-compatible kitchen systems to manufacturer spec, and we put that price in writing before work starts. Most owners land on this page after a specific failure: a Kohler faucet that drips from the base, a pull-down sprayer that won’t retract, a sink that’s pulling away from the counter, or a filter cartridge that’s stopped delivering. Kohler parts are not universal, so the fix starts with identifying the exact model, not guessing at a part number.
Key takeaways:
- Kohler kitchen remodels in Boulder City: $14,000 – $45,000 installed.
- Kohler uses series-specific cartridges and valve bodies; a cartridge from a different Kohler series will not fit.
- Written price before any work begins, backed by the 365-Day Done Right Promise.
- Bradford Remodeling Boulder City is an independent contractor, not affiliated with Kohler.
Which Kohler Models This Applies To

Kohler kitchen fixtures split into a few families, and the family determines which part fits. Faucets fall into lines like the Bellera, Simplice, Graze, Crue, and Purist pull-down and pull-out series. Sinks include the undermount and farmhouse cast iron lines, plus the Vault and Strive stainless models. Filtration runs through the Aquifer and Wellspring cartridge systems. Each one uses its own cartridge, spray head, aerator, or mounting hardware, and the parts don’t cross over.
To identify yours, start with the label. Kohler stamps a model number on the faucet body (usually under the base or on the shank) and on the spray head. If the label is worn, the shape of the spray head and the handle style narrow it down. Take a photo of the base, the spray head, and the handle before you order anything. Cartridge dimensions vary by series by a few millimeters, and that’s enough to make the wrong part useless.
The OEM-versus-aftermarket call matters more on Kohler than on most brands. Kohler OEM cartridges are ceramic-disc designs built to a specific tolerance, and a generic replacement often fits the bore but seats poorly, which shows up as a drip within months. For a faucet you’re keeping, we source OEM. For a spray head or aerator on a fixture you plan to replace within a year or two, a quality aftermarket equivalent is a reasonable short-term call. We don’t stock parts and don’t carry them on a truck; we identify the model and source the correct part to it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Kitchen Remodeling Is Failing
These are the failures we see most in Boulder City kitchens, and what’s usually behind each:
- Dripping from the spout when the faucet is off. The ceramic cartridge has worn or mineral has scored the disc. Hard water accelerates this.
- Water pooling at the base of the faucet. The O-ring or base seal has failed, and water is getting under the fixture onto the counter.
- Pull-down sprayer won’t retract or drips. The spray head’s internal check valve or the hose weight has failed. The weight is cheap; the spray head is series-specific.
- Sink pulling away from the counter. The undermount clips or the sealant have let go, often after years of thermal movement between the counter and the cabinet.
- Filtered water slows to a trickle. The Aquifer or Wellspring cartridge is spent. On Boulder City’s water, cartridge life often runs shorter than the rated interval because of mineral load.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work actually costs in Boulder City, installed, with the part and labor together:
| Scope | Installed price range |
|---|---|
| Faucet replacement (Kohler, standard deck mount) | $300 – $900 |
| Cartridge and O-ring rebuild (existing Kohler faucet) | $180 – $420 |
| Spray head / hose / weight replacement | $150 – $380 |
| Undermount sink re-secure and reseal | $250 – $650 |
| Sink replacement (Kohler stainless or cast iron) | $500 – $1,600 |
| Filtration cartridge and housing service | $150 – $400 |
| Full kitchen remodel, Kohler fixtures included | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves on three things: which Kohler series you’re specifying, whether the rough-in has to change, and whether the counter has to come up to reach the sink clips. We don’t do moving numbers at the door. The price is written before any work starts, and the finished work carries the 365-Day Done Right Promise. If it fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely do a few things yourself. Shut off the supply valves under the sink and check whether the drip stops, which tells you if the cartridge is the problem. Wipe the base dry and watch for a bead of water to find a leaking O-ring. Photograph the model label. What goes wrong past that point is the shutoff valve: on older Boulder City homes, a valve that hasn’t been turned in years can shear when you force it, and now you have water where you didn’t before. Cartridge removal also takes the right puller, and a seized cartridge pried the wrong way can crack the valve body, which turns a $200 repair into a fixture replacement. We handle the valve, the cartridge, and the reseal in one visit and write the price first.
FAQs

How long does a Kohler kitchen faucet cartridge last?
In Boulder City, expect five to eight years on a ceramic cartridge, often less with heavy mineral water. Hard water scores the disc faster, and a drip that starts small usually means the cartridge is near the end of its life. Call (844) 797-9259 for an exact quote, and the estimate is free.
Can the part be repaired instead of replaced?
Sometimes. A cartridge and O-ring rebuild fixes a drip about as often as a full replacement does, and it costs a fraction. A cracked valve body or a failed spray-head check valve can’t be rebuilt and has to be replaced. We tell you which one you’re looking at before any work begins.
How long does the swap take?
A cartridge rebuild usually runs under an hour. A full faucet replacement runs one to two hours. A sink replacement with counter work can take a full day. We tell you the time window with the written price, not after we arrive.
How do you source the Kohler part?
We identify the model from the label or photos and source OEM Kohler parts to that exact model, or a quality aftermarket equivalent when you’ve chosen to go that route. We don’t stock parts and don’t carry them on the truck, so the source is always traceable to a part number. Call (844) 797-9259 to schedule your free estimate.
Bradford Remodeling Boulder City works from a written price on every job, answers the phone with a live person around the clock, and stands behind the work for a full year under the 365-Day Done Right Promise. Our technicians have up to 22 years of experience, and we work with a documented roster of brands that includes Kohler alongside KraftMaid, Cambria, and Silestone. Call (844) 797-9259 for a free estimate on your Boulder City kitchen.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












