







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Home Additions & ADU: The Boulder City Owner’s Guide
We install and finish Mighty Buildings-compatible home additions and ADUs in Boulder City, and most completed projects land between $45,000 and $130,000 depending on size, foundation work, and finish level. ADU builds run higher, from $90,000 to $220,000. Owners usually land on this page after a walkthrough turns up something that doesn’t match: a panel joint that’s opened along the ceiling line, a utility stub that doesn’t line up with the plan set, or a foundation that’s shifted against the module footprint. One early inspection call in Boulder City caught a roof-to-wall seam pulling apart after a summer of 110-degree swings, before any water got inside.
Which Mighty Buildings Models This Applies To
Mighty Buildings builds panelized and 3D-printed modular units, and the specs differ across their product lines, including single-family ADU panels, accessory structures, and the larger two-story configurations. The first step on any Boulder City project is pulling the model and panel serial information from your build documents, the stamped plan set, or the label plate on the module. Measurements matter here. Mighty Buildings panels are engineered to tight tolerances, and a foundation or utility rough-in set to standard stick-built dimensions can be off by a half-inch or more when the module arrives. We don’t stock Mighty Buildings parts, and we don’t carry them on a truck. We source direct from the manufacturer or from a documented supplier who can match the exact panel or component spec. That’s what the project file and the written scope are for. If your plan set is missing or the label is unreadable, we can often identify the right component from the panel dimensions and the connection detail on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Home Additions & ADU Is Failing
These are the failures we see most often on modular and panelized builds around Boulder City, where the desert swings from hard freeze to triple-digit heat inside a single year.
- Panel seam separation along interior or exterior walls. Thermal movement works the caulk and the connection hardware, and gaps open at the joints first. On a modular build, a seam that opens is a sign the panel connection needs attention before moisture follows.
- Roof-to-wall flashing pulling away. UV degradation in Boulder City breaks down sealant faster than most climates. Once the flashing lifts, wind-driven rain finds the gap and the interior shows staining, not the roof.
- Foundation settling under a corner or along one module edge. Expansive clay soils and poor drainage move a slab or pier system. You’ll notice a door that won’t latch, a floor that sounds hollow, or a hairline crack at the module footprint.
- Utility stub misalignment after site work. Plumbing and electrical rough-ins that were set to a generic plan instead of the Mighty Buildings spec often require rework at the connection point. A slow drain or a dead circuit at one wall is the clue.
- Interior finish cracking at panel joints. Drywall or skim coat over a panel joint will crack if the panel connection isn’t stable. This isn’t a paint problem, and it won’t fix itself with another coat.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Home additions in Boulder City run from $45,000 to $130,000 installed, with the range driven by square footage, foundation type, roof system, and whether the project includes an interior finish package. ADU construction runs from $90,000 to $220,000, and garage conversions from $30,000 to $80,000. Those numbers include labor, permits pulled and inspections passed, and materials. What they don’t include is whatever the inspection turns up after work begins. That’s why the written price comes before any tool comes out. You see parts, labor, and permit fees on paper, not a number that moves at the door. Wiring, plumbing corrections, and any structural repair found on site get added to the written scope and signed off before the crew starts. Every completed project carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge. If a panel seam we sealed opens, we’re on it. That’s what the guarantee says, and we hold to it.
DIY or Call Us?
If your Mighty Buildings addition or ADU has a cracked interior joint, a lifting roof flashing, or a foundation issue, call us. A homeowner can safely check a few things: look at the caulk line at exterior panel joints, notice where water pools after rain, and test a door that suddenly sticks. Those observations help the estimate. What trips up DIY on a modular build is the connection detail. The panels and hardware are engineered to a spec, and a repair that looks right to the eye can void a manufacturer warranty on the panel or the system. We don’t recommend re-flashing a roof-to-wall seam yourself, either. That’s fall-height work, and on a Boulder City roof in July, the risk is real. There’s also the question of the manufacturer spec. A quick call to (844) 797-9259 gets you a straight answer on what’s covered and what needs a professional, and the estimate is free.
FAQs

A well-built Mighty Buildings structure is engineered to last decades, and we see 20-year-plus lifespans on properly maintained modular builds in the Boulder City heat. The variable is maintenance, not the panel itself. UV sealant, roof flashing, and drainage get checked yearly.
Often, yes. A panel seam that’s opened but isn’t structurally compromised can be re-sealed and reconnected to spec. Roof-to-wall flashing that’s lifting can be reset and re-flashed. When the connection hardware or the panel itself is damaged, replacement is the honest call, and we’ll tell you which one you’re facing after we see it.
A panel seam or flashing repair is usually a day or two. A foundation correction or utility rework takes longer, and we give you the schedule in the written scope before work starts. We don’t put a date on the calendar we can’t keep.
We source from the manufacturer or a documented supplier matching the exact model and panel spec from your build documents. We don’t stock Mighty Buildings parts. If you have the label plate or the stamped plan set, bring it to the estimate, and we’ll match the component to the spec before we quote it.
Bradford Remodeling Boulder City is an independent service provider and is not affiliated with Mighty Buildings. We also work with KraftMaid, Cambria, and Silestone on finish and surface packages.
If your Mighty Buildings addition or ADU in Boulder City needs a straight answer and a written price, call (844) 797-9259 for a free estimate. We’ll look at the part, match it to the model, and put the scope in writing before any tool comes out. Every completed project carries the 365-Day Done Right Promise: if it’s not done right, we make it right. Every price is in writing, every time.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












